Mcculloch String Trimmer Parts

This is a wound spool assembly that can be used on several models of lawn and garden equipment. The spool assembly is the part that holds the trimming line. It also operates by letting the line feed out when a trimmer or pruner is being used. The wound spool assembly is a component of the cutting head assembly but can be replaced as a single part. This wound spool assembly part experiences a great amount of wear and tear. It's not a bad idea to have an extra available for any needed replacement. If the spool assembly is broken or damaged, it can be replaced in just a few minutes. The first step is to power off the equipment and remove the spark plug wire. The cover should be removed to get access to the wound spool assembly. Switch it out with the replacement part.This wound spool assembly is sold as an individual part. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The spool assembly is designed to be compatible with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Husqvarna.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

This is a genuine replacement recoil spring that is designed to be used with select lawn and garden equipment engines. The recoil spring is part of the starter pulley assembly. When the starter rope is engaged, the pulley will then engage the recoil spring, which retracts to cause the spinning that helps power the engine. This spring is subject to constant use and can become stretched or even snap over time and with regular use.This genuine OEM recoil spring is manufactured by MTD and designed to exact standards. It can be used in models from MTD, as well as those from RYOBI, Troy-Bilt, Yard Man, Yard Machines, and Bolens. The recoil spring is made of durable metal and sold as an individual part. The rest of the starter components will need to be purchased separately if they need replaced. Always wear gloves when performing engine repairs and be careful when working on the starter system because the springs and pulleys can be under a lot of pressure. Allow the engine to cool completely and disconnect the power before getting started.

This genuine OEM replacement part is a rebuild kit of various gaskets used in a gas-powered leaf blower engine. This kit includes a crankshaft gasket, a carburetor gasket and carburetor adapter gasket, a cylinder base gasket, and a muffler shield. Gaskets act like a seal between different parts of an engine that keeps different liquids and gasses from passing into the wrong section of the engine. Gaskets can become worn out and crack or shrink over time through repeated use and exposure to exhaust and heat in the engine. A common sign of a fault gasket is if your engine is not running at full capacity or if it stalls out shortly after ignition. Changing out a gasket should not be a difficult job, but it will depend on which gasket you are replacing. Making this repair will require a screwdriver and set of pliers. This gasket rebuild kit is compatible with Poulan, Weed Eater, and Husqvarna gas powered leaf blowers. These gaskets are made of a mix of plastic and rubber. This kit ships individually and is sourced directly from its original manufacturer.

This cylinder head is a genuine Husqvarna part, sold individually. This cylinder head can be used as a replacement part in a leaf blower. The purpose of the cylinder head in a leaf blower is to affix to the top of the cylinder block and close off the combustion chamber within the cylinder, so that airflow in and out of the cylinder block can be regulated and controlled to exact specifications for standard use of the leaf blower.The cylinder head in a leaf blower might have to be replaced if the cylinder head is dented, punctured, scraped, torn, cracked, chipped, or otherwise damaged to the point of exposing the internal combustion chamber to the elements or to possible leakages from the inside or outside of the component. If this occurs, the cylinder head should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This cylinder head is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.

Leaf blowers are noisy machines in general, but could be far louder if they were not fitted with mufflers. This is the part that catches the sound emitted by the engine and keeps pressure in the engine at a balanced level. When a blower seems to running at a level of noise that is far above normal or if it doesn't seem to run as powerfully as it should, it might be that the muffler needs to be replaced. This replacement blower muffler is designed for use on blowers made by Husqvarna, Poulan and Weed Eater. It will suppress the amount of noise exiting from the engine. This is an OEM replacement part that is made of metal and ships individually. Replacing it is not a very complex task, but will vary from model to model. It can often be managed with only a screwdriver.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

The clutch drum assembly seen here from Husqvarna is an important part of machines such as trimmers and pruners. The purpose of the clutch drum is to engage the clutch to spin the flex shaft and the cutting head. The clutch drum assembly could need to be replaced for many reasons. One of the most common signs is when the trimmer head stops spinning when it encounters weeds, grass, etc. Other signs include having a drive shaft that will not engage or a clutch that won't engage the drum. Sometimes, the lining in the clutch drum could become stripped, so there will be no torque when it is used. Replacing the clutch drum assembly can be a complicated task and will require a range of tools. Owners will also need to empty the fuel from the machine before they replace the clutch drum. This authentic clutch drum assembly is an OEM part from Husqvarna. It is sold individually and works for certain models of string trimmer and pole pruner. Brands that are compatible in addition to models from Husqvarna include Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.

This fan baffle is a genuine Husqvarna part, sold individually. This fan baffle can be used as a replacement part in a string trimmer or a pole pruner. The fan baffle in a string trimmer or a pole pruner might have to be completely replaced if the fan baffle can no longer serve its typical function. This could occur if the fan baffle suffers damage for which a repair cannot be conducted. If this occurs, the fan baffle should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook. It is a simple replacement process that will only require simple tools to conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fan baffle is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.