Parts for Electrolux EW27MC65PSB: 03 - Microwave Parts

Microwave not heating or starting? This door switch ensures proper door closure and circuit completion. DIY-friendly repair in about 15 minutes.

Microwave won't heat or start? A blown thermal fuse often causes complete failure. This safety cutoff prevents overheating. Easy 15-minute fix for most DIYers.

Microwave runs but won't heat, or stays on when door opens? A faulty door switch is the likely cause. DIY repair takes about 30 minutes with basic tools.

Microwave won't heat or start? This thermal fuse cuts power when temperatures exceed safe limits. Simple fix when your fuse has blown or failed.

Replacement interior light bulb for microwave cavities. Replace when dim, flickering, or burned out to restore visibility. Confirm fit with your model.

Replace your microwave's light socket if bulbs fail to illuminate despite having power. Restores interior or under-cabinet lighting. Verify fit by model.

This evaporator fan motor circulates cold air across the evaporator coil to keep the refrigerator and freezer compartments cold and balanced. Replacing a failing fan restores proper airflow and helps maintain set temperatures. What it does:

• Spins the evaporator fan blade to move air over the evaporator coil for even cooling
• Helps prevent ice build-up from poor airflow and uneven compartment temperatures
• Commonly needed when you hear a loud humming, rattling, or no airflow from the fridge section
• Supports defrost system performance by ensuring warm air is not trapped near the coil

• One evaporator fan motor

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing the evaporator cover inside the freezer compartment
• Handle wiring and connector clips carefully; ensure correct orientation of the fan blade before reassembly

Microwave not heating? This high voltage transformer powers the magnetron to generate heat. Critical component requiring careful installation.

Microwave won't heat or makes humming noise? This capacitor works with the magnetron to generate heat. Moderate difficulty repair, 30-45 minutes.

Microwave not heating? The high voltage diode converts AC to DC for the magnetron. Common failure part when food stays cold. Moderate skill repair.

Microwave not heating food? The magnetron generates the microwaves needed for cooking. This repair requires electrical expertise and safety precautions.

Turntable stops rotating or turns briefly then stops? This motor restores rotation in microwaves. Requires bottom panel access and unit removal.

Microwave not heating? A failed transformer prevents the magnetron from generating heat. This high-voltage component requires electrical expertise to install.

Door hinge for microwaves and wall ovens. Replaces worn, broken, or damaged hinges that prevent proper door alignment and smooth operation.

Replacement door hinge for microwaves and wall ovens. Installs on the door frame to support smooth opening and closing. Needed when hinge is broken or worn.

Replacement door latch hook for microwaves. Secures the door latch assembly to keep the door properly closed. Needed when the hook is broken or worn.

Microwave door won't stay closed? This door latch hook securely holds the door shut during operation. Mounts to the top interior of the door cavity.

Fixes microwave turntable that won't rotate or makes grinding noises. This cam guides the turntable rotation mechanism. Simple 10-minute repair.

Microwave door won't latch or close properly? This door cam guides the latch mechanism for secure closure. Common fix for alignment issues.

Support bracket for built-in microwaves and wall ovens. Installs inside the cavity to provide structural reinforcement. Replace if bent, cracked, or missing.

Connects the turntable motor to the rotating glass tray in your microwave. Replace if the coupler is cracked, broken, or missing and the tray won't rotate.

Access panel cover that protects internal microwave components. Replace if cracked, broken, or missing to restore finished appearance and prevent dust entry.

Waveguide cover for your microwave. Installs inside the cavity to protect internal components. Replace if cracked, burned, or missing. Fits various models.

This replacement angle is a small metal mounting bracket used to secure components in place on compatible Frigidaire appliances. It restores proper positioning and support for panels or assemblies that rely on a fixed bracket. What it does

• Provides a sturdy mounting point to hold panels, rails, or small assemblies in alignment.
• Replaces bent, cracked, or missing brackets that allow shifting or vibration.
• Helps stop rattling, misalignment, or loose panels caused by a damaged bracket.
• Works as a direct-fit hardware piece when the original bracket is worn or broken.

• Installer should turn off power to the appliance and unplug before starting work.
• Use appropriate hand tools; bracket fasteners may require small screws or bolts.
• Keep track of removed fasteners and any shims or spacers—reinstall in the same order.

Spring component for microwave ovens. Installs internally to provide tension or support. Replace if spring is broken, stretched, or missing for proper function.

Spring component for microwave door mechanism. Replaces worn, broken, or missing springs that affect door operation. Structural part for door assembly.

Microwave not defrosting properly? This thermal cut-out defrost thermostat monitors temperature to prevent overheating and maintain safe defrost cycles.

Microwave not responding to buttons or display blank? This control board regulates all functions and user interface. Restores reliable operation.

This holder is a small mounting bracket that secures internal appliance components to prevent movement and maintain proper alignment, helping reduce noise and keep parts functioning reliably. What it does:

• Secures and positions an internal component or assembly to the appliance frame
• Prevents shifting or sagging that can cause rattling or misalignment
• Helps maintain proper spacing for connected parts to operate correctly
• Reduces noise caused by loose fittings or vibration

• Recommended for users comfortable with appliance repair; disconnect power before servicing
• Remove adjacent panels or components as needed for access; keep fasteners organized
• Inspect mating surfaces and replace any damaged screws or clips for a secure fit

This complete door assembly replaces a damaged or worn door to restore sealing, alignment, and normal operation. It provides a ready-to-install replacement that helps stop air leaks and improves temperature control and usability. What it does:

• Replaces the appliance door structure so it opens, closes, and latches correctly
• Restores the door sealing surface to prevent air and moisture infiltration
• Helps resolve symptoms like poor temperature control, frost buildup, or visible door damage
• Eliminates rattling or misalignment caused by bent or broken door components

• Disconnect power (and water, if applicable) before beginning repair
• This assembly can be heavy or awkward—have a helper available for safe handling
• Align and secure mounting points per OEM instructions; test latch and seal before finishing
• If gasket or trim appears damaged, replace those components for optimal performance

Replacement rack assembly for microwave ovens. Installs inside the cavity to support cookware. Replace if bent, rusted, warped, or broken from heavy use.

Replacement rack assembly for your microwave. Installs inside the cooking cavity to support dishes during heating. Replace if bent, warped, or damaged.

Replace your microwave door gasket to restore a proper seal and prevent heat loss. Fixes worn or damaged seals for consistent heating. Verify fit.

Wire harness assembly for microwaves. Replaces damaged, frayed, or disconnected internal wiring harness. Restores proper electrical connections.

Wire harness for microwave ovens. Connects electrical components inside the unit. Replace if wires are frayed, burned, damaged, or connections broken.

This is a replacement adhesive label used to restore factory markings, warnings, or identification on compatible appliances. It keeps information visible and helps maintain safe, compliant appliance operation. What it does:

• Replaces a faded, torn, or missing appliance label so model, serial, or safety info is readable
• Restores factory-applied warnings or operating instructions that are required for safe use
• Adhesive backing secures the label to a flat, clean surface for long-lasting adhesion
• Helps owners identify the appliance and its important markings during service

• One adhesive replacement label

• Clean and dry the surface thoroughly before applying; remove grease, dust, and old adhesive residue
• Align carefully, peel backing, and press firmly from one edge to the other to avoid air bubbles
• Do not apply to hot surfaces or in high-humidity conditions until surface is cool and dry
• Ensure the replacement is placed in the same visible location

Wire harness for microwave ovens. Connects electrical components inside the cabinet. Replace if wires are frayed, damaged, or connectors are broken.

This replacement appliance label provides the factory identification and safety information fastened to the appliance so you can read model/serial and safety/warning text clearly. It restores legible markings for servicing and ownership records. What it does

• Shows the appliance identification, model/serial or rating area and factory safety/warning text so technicians and owners can service data.
• Helps ensure required safety and operating instructions remain visible and readable.
• Replaces a torn, faded, or missing label that can make identification and troubleshooting harder.
• Supports accurate parts ordering and service by restoring the original markings.

• One replacement label

• Peel-and-stick replacement; clean and dry the surface thoroughly before applying.
• Align carefully and press from one edge to the other to avoid bubbles; firm pressure ensures adhesion.
• Do not stretch or trim the label unless explicitly specified by the equipment instructions.
• For safety, disconnect power or follow manufacturer safety precautions before working near electrical components.

Replacement mounting screw for microwave ovens. Secures internal components and panels. Needed when original screws are stripped, missing, or damaged.

Replacement mounting screw for microwave panels, brackets, and trim. Needed when original fastener is missing, stripped, or damaged during repair work.

Screw secures the door latch and upper hinge plate on your microwave. Replace if missing, stripped, or loose to properly fasten door hinges and latch.

This is a replacement mounting screw used to fasten appliance panels, trim, or components. It restores secure attachment and helps eliminate rattling, loose parts, or misaligned panels for a clean, stable fit. What it does:

• Secures panels, brackets, or trim to the appliance chassis
• Stops vibration-related rattles and movement from loose fasteners
• Keeps components aligned for proper operation and appearance
• Replaces lost or stripped screws to restore factory fit

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten; stop when snug to avoid damage
• Inspect surrounding parts and replace as needed

Replacement lever for microwave door or latch mechanisms. Installs to operate control arms and moving parts. Needed when original is cracked, broken, or worn.

Mounting bracket for built-in microwave ovens. Secures microwave chassis to cabinet or wall. Replace if bent, broken, or missing during installation.

Microwave won't heat or start? A blown thermal fuse often causes complete failure. This safety cutoff prevents overheating. Easy 15-minute fix for most DIYers.