Parts for Poulan 2300CVA: Model 2300 Av-Type I & Ii (Only) Parts

This flywheel key is a genuine Husqvarna part, sold individually. This flywheel key can be used as a replacement part in trash compactors, string trimmers, leaf blowers, and chainsaws. The purpose of the flywheel key is to keep up the momentum generated by the engine in order to maintain the rotation of the crankshaft.The flywheel key can be punctured, dented, cracked, warped, or eroded, and if this occurs, the flywheel key should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flywheel key is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Broan, and Paramount.

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.

This is a wave washer, also called a wave spring washer, that is used in many types of lawn and garden equipment. The wave washer is a small metal disc with a hole in the middle. Rather than being flat like most washers, the wave washer has waves that offer three, four, or six points of contact to better carry a load and create a large range of deflection.As the equipment containing the wave washer is used, it can experience damage or wear and tear. When this happens, the wave washer will not operate as expected by holding the load and assisting other components in the equipment. The equipment will need to be disassembled to reach the wave washer. Remove any parts in the way and remove the old component before replacing it with a new part.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The wave washer is sold as an individual part. The washer is made to be compatible with string trimmers, leaf blowers, chainsaws, carpet cleaners, and trash compactors manufactured by Turf King, Paramount, Broan, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is a genuine fuel cap with retainer that is designed as a replacement for select outdoor lawn and garden equipment engines. The fuel cap is responsible for sealing the fuel tank, providing an airtight fit and securing the fluid inside the tank to prevent fuel spills during use. The plastic retainer holds the cap in place when it is open. Both parts could become damaged over time and the retainer could detach entirely. If this occurs, it is best to replace the entire unit.This OEM fuel cap with retainer is manufactured by MTD and designed for use in machines from the brand, as well as those from Yard Man, Husky, Bolens, and Yard Machines. It screws on and requires no tools for installation. The retainer simply fits into the fuel tank to secure the cap when it is open. This cap is sold as an individual part and does not include any additional hardware or a new fuel tank. If the fuel tank itself is damaged and needs replaced, that will require an additional purchase. This fuel cap with retainer will ensure that fuel stays secured and that the unit can run properly at all times.

A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This locknut is a genuine Husqvarna part, sold individually. This locknut can be used as a replacement part in string trimmers, leaf blowers, edgers, and chainsaws. The purpose of a locknut for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance in conjunction with a bolt.If the locknut has been stripped away or, in its absence, has left one or more components detached from the appliance, the locknut should be replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This locknut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, and Paramount.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.