Parts for Electrolux EIED2CAQSW00: 05 - Motor Parts

This replacement refrigerator door panel restores the exterior surface and structural fit of the appliance, helping protect internal components and maintain proper closure. It's a direct-fit part meant to replace a damaged or dented door panel. What it does

• Replaces a dented, cracked, or cosmetically damaged refrigerator door panel
• Restores proper alignment so the door closes and seals consistently
• Protects internal insulation and components from further damage
• Helps maintain appearance and resale value of the appliance

• One replacement refrigerator door panel

• Disconnect power before beginning any repair and work on a clean, stable surface
• You may need to transfer hinges, handles, gaskets, and internal trim from the old door
• Larger doors can be heavy or awkward — have a second person assist to avoid injury or damage
• If the door includes glass or electrical components, handle with care and follow OEM instructions for reassembly

This condenser coil removes heat from the refrigerant so the refrigerator can maintain proper cooling. Replaces a worn or damaged condenser to help restore normal cooling performance and compressor efficiency. What it does:

• Condenses refrigerant from a gas to a liquid by dispersing heat to surrounding air.
• Helps the compressor run at correct temperatures and prevents overheating.
• Common symptoms it can address: refrigerator not cooling well, compressor running constantly, or unusually warm cabinet.
• Works with the appliance's condenser fan and compressor to complete the cooling cycle.

• Disconnect power to the appliance before beginning any work.
• Avoid bending or damaging coil fins; handle the assembly carefully.
• Some installations may require removing the back service panel and disconnecting mounting brackets; retain all fasteners.

This replacement refrigerator door handle restores a secure grip and smooth opening for a damaged, cracked, or broken handle. Durable molded construction matches the original fit to keep the door easy to open and close. What it does

• Provides a sturdy grip to open and close the refrigerator door
• Replaces cracked, chipped, or loose door handles that affect operation
• Restores original appearance and user control at the door edge
• Helps prevent further damage from using a compromised handle

• Disconnect power to the appliance or turn off water before starting.
• Remove any trim or end caps and unfasten mounting screws to swap the handle.
• Support the door while removing/installing the handle to avoid stress on the hinges.
• Use appropriate hand tools and avoid overtightening fasteners to prevent cracking.

This replacement gasket seals the refrigerator/freezer door to help maintain consistent internal temperature and reduce energy loss. A properly sealing gasket improves cooling performance and helps prevent moisture buildup and odors. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in
• Helps prevent frost buildup and water leaks by blocking warm, moist air
• Reduces compressor runtime and energy use caused by escaping cold air
• Common symptom fixes: visible gaps, cold air leak at the door, excess frost, or food spoiling faster than normal

• Disconnect power to the appliance before starting any work.
• Clean the door flange and remove old adhesive or debris for a proper fit.
• Warm the gasket and align the corners, pressing evenly into the channel.
• Check the full seal after installation and allow 24 hours for the gasket to form to the door.

This replacement bushing is a small sleeve that supports a rotating shaft or drum and helps reduce friction and wear. Restores smoother, quieter rotation for components that contact the shaft or mounting post. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and uneven wear
• Creates a low-friction surface between moving parts to help prevent rubbing and abrasion
• Helps reduce noise caused by metal-on-metal contact
• Commonly replaced when worn, cracked, or causing binding during rotation

• One bushing

• Disconnect power before beginning any repair and follow all safety procedures
• Access and removal vary by appliance model; remove panels or drum as required to reach the worn bushing
• Inspect the mating shaft/post and surrounding parts; replace any damaged components to prevent premature wear
• Use only lubricants and fasteners specified by the manufacturer; do not force parts when installing

This bushing kit replaces worn drum support bushings to restore smooth, quiet drum rotation and reduce wobble or scraping noises. It helps stabilize the drum and improves long-term dryer performance when installed correctly. What it does

• Replaces worn or damaged drum support bushings that allow the drum to turn freely
• Reduces vibration, rubbing, and scraping noises caused by worn bearings or sleeves
• Helps prevent drum misalignment and uneven wear on the drum and rollers
• Restores proper drum clearance for smoother operation and longer component life

• One bushing kit containing the parts shown on the OEM diagram

• Disconnect power before starting work; follow all safety guidelines for your appliance
• Access steps vary by model—refer to the appliance's service manual or OEM exploded diagram
• Inspect mating surfaces and replace any additional worn supports, seals, or fasteners as needed

This is a replacement drive belt that transfers motor power to rotating appliance components so the unit moves as designed. It restores proper drivetrain function and helps stop slipping or loss of rotation. What it does

• Wraps around pulleys to transmit motor torque to the drum or agitator
• Restores normal rotation when the appliance fails to turn or slips
• Can reduce squealing or burning-rubber smells caused by a worn belt
• Ensures correct tension for consistent operation

• One replacement drive belt

• Disconnect power (and water, if applicable) before starting any repair
• Inspect pulleys and idlers for wear; replace if damaged to avoid premature belt failure
• Verify belt routing and proper tension during installation

This OEM part is a dryer motor assembly. The dryer motor assembly is the main motor that propels the dryer's essential functions of spinning and drying. If the dryer is no longer spinning, heating, or drying clothes effectively, it might be time for a new motor assembly. Luckily replacing the motor assembly is not a difficult process.To start, unplug the dryer and move it away from the wall. Access the back panel and remove the screws that secure it. Once the panel has been removed, locate the dryer motor assembly on the back of the dryer drum. Remove the mounting screws securing the motor to the back of the tub. Once loosened pull the old motor assembly outward to release it from the dryer. Replace with the new motor assembly and reinstall the back panel.This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand dryers.

This bushing kit replaces worn drum support bushings to restore smooth, quiet drum rotation and reduce wobble or scraping noises. It helps stabilize the drum and improves long-term dryer performance when installed correctly. What it does

• Replaces worn or damaged drum support bushings that allow the drum to turn freely
• Reduces vibration, rubbing, and scraping noises caused by worn bearings or sleeves
• Helps prevent drum misalignment and uneven wear on the drum and rollers
• Restores proper drum clearance for smoother operation and longer component life

• One bushing kit containing the parts shown on the OEM diagram

• Disconnect power before starting work; follow all safety guidelines for your appliance
• Access steps vary by model—refer to the appliance's service manual or OEM exploded diagram
• Inspect mating surfaces and replace any additional worn supports, seals, or fasteners as needed

This bushing kit replaces worn drum support bushings to restore smooth, quiet drum rotation and reduce wobble or scraping noises. It helps stabilize the drum and improves long-term dryer performance when installed correctly. What it does

• Replaces worn or damaged drum support bushings that allow the drum to turn freely
• Reduces vibration, rubbing, and scraping noises caused by worn bearings or sleeves
• Helps prevent drum misalignment and uneven wear on the drum and rollers
• Restores proper drum clearance for smoother operation and longer component life

• One bushing kit containing the parts shown on the OEM diagram

• Disconnect power before starting work; follow all safety guidelines for your appliance
• Access steps vary by model—refer to the appliance's service manual or OEM exploded diagram
• Inspect mating surfaces and replace any additional worn supports, seals, or fasteners as needed

This wiring harness routes power and signals between an appliance's components to restore reliable electrical connections and proper function. It replaces damaged or frayed wiring to help eliminate intermittent operation and connection failures. What it does

• Carries power and control signals between panels, motors, valves or sensors
• Restores missing or broken connector-to-connector connections
• Helps stop intermittent power, controls that won't respond, or components that don't run due to broken wiring
• Prevents shorts or arcing when damaged wires or connectors are replaced

• One wiring harness assembly

• Disconnect all power before servicing the appliance to avoid shock
• Match connectors and routing to the original harness; do not force connectors
• Replace only with the correct harness for your unit; inspect connector pins for damage
• Secure wires and use factory clips or ties to prevent contact with sharp edges or moving parts

This direct drain is the OEM-style drain tube that channels defrost and condensation water away from the refrigerator evaporator area to the drain pan, helping prevent pooling and leaks. It restores correct water flow for reliable defrost drainage. What it does:

• Routes defrost and condensation water from the evaporator area to the drain pan
• Helps prevent water pooling or leaks inside the cabinet
• Reduces risk of ice buildup around the evaporator by keeping the drain clear
• Supports normal defrost drainage and helps prevent related odors

• One direct drain tube

• Disconnect power before removing panels or working near electrical components
• Remove applicable back/freezer panels to access and replace the drain tube
• Handle carefully to avoid kinking; ensure proper seating and secure routing to the drain pan
• Test by pouring a small amount of water into the drain area to confirm proper flow before reassembling