Parts for Electrolux FFBD1831US: Motor & Pump Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Dishes not getting clean? A damaged spray arm can't distribute water properly. This dishwasher spray arm restores full wash coverage and cleaning power.

Dishwasher filter assembly traps food particles and debris to prevent recirculation. Replace when cleaning no longer restores performance or if damaged.

Replace a damaged filter housing causing water leaks or poor flow in your dishwasher. This assembly restores proper filter seating and clean water routing.

Fixes dishwasher not draining or leaving standing water at cycle end. This drain pump assembly removes wastewater to restore normal drainage function.

This replacement sump collects and channels defrost and condensate water from the refrigerator evaporator to the drain system, helping prevent leaks and standing water under the appliance. What it does:

• Collects defrost and condensation water from the evaporator area
• Directs condensate toward the drain to prevent pooling under the cabinet
• Helps reduce water-related floor damage and odors from standing water
• Common symptom: water pooling beneath or around the refrigerator cabinet

• Sump

• Inspect surrounding seals and drain tubing for clogs or damage when replacing the sump
• Remove power to the appliance before accessing the sump area
• Handle carefully to avoid cracking the pan or damaging mounting tabs
• If you see persistent leaks after installing the sump, recheck drain lines and the evaporator area for blockages

Fix standing water in your dishwasher with this drain pump assembly. Restores proper drainage so cycles can complete. Moderate difficulty repair.

Fix leaking water under your dishwasher with this pump cover assembly. Seals the pump housing to prevent leaks during wash cycles. Direct fit part.

Fix poor cleaning or drainage issues with this dishwasher impeller and seal kit. Restores water circulation for proper spray arm operation.

Leaking dishwasher at valve or hose connection? This rubber O-ring sealing gasket creates a watertight seal at fittings. Simple 5-minute fix.

Outer casing panel for your dishwasher. Covers internal components and provides structural support. Replace if cracked, dented, or damaged.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Secures dishwasher hoses to prevent leaks. Replace if cracked, rusted, or loose causing water leaks. Verify fit with your model number before ordering.

Secures hoses to prevent leaks in your dishwasher. Replace if cracked, rusted, or causing water leaks during cycles. Verify fit with your model number.

The Tube is an OEM part for Frigidaire dishwashers. It is responsible for connecting the dishwasher's pump outlet to the drainage system, allowing for water flow during the dishwashing cycle.

A bad tube can be caused by damage, blockage, or wear and tear. Signs of a faulty connector tube include leaks, reduced water flow, or improper drainage.

Symptoms of a bad tube can include:

• Leaks around the dishwasher
• Reduced water flow or weak spray arms
• Standing water at the bottom of the dishwasher

Replace your damaged or malfunctioning tube with this genuine OEM Frigidaire part to restore your dishwasher. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement tube directs water to the ice maker and fill assembly so the unit can make ice and dispense water reliably. It's a simple, serviceable part that restores proper water flow when the original tube is cracked or leaking. What it does

• Channels water from the inlet to the ice maker/fill cup for normal ice production
• Prevents leaks by replacing cracked, brittle, or clogged tubing
• Helps stop intermittent or reduced ice production related to damaged tubing
• Works with the refrigerator's factory fill and water path components

• One replacement tube

• Recommended for technicians or experienced DIYers; the refrigerator's service manual for routing and fastener locations
• Shut off water supply and disconnect power before replacing to avoid leaks and electrical hazards
• Inspect clamps and fittings during install; replace seals if they show wear
• Test for leaks after restoring water and power before final reassembly

Fix error code 2 or inaccurate temperature readings with this dishwasher thermistor. Restores proper temperature monitoring for optimal cleaning.

Prevents water leaks around your dishwasher door. Replace if cracked, torn, or causing leaks during cycles. Confirm fit with your model number.

A small spring-style hose clamp that secures flexible tubing to fittings to help prevent leaks and hose separation. Replaces a worn or loose clamp to restore a tight seal on water and drain connections. What it does

• Compresses around a hose to hold it firmly on a barbed or smooth fitting
• Helps stop leaks and reduces chance of hose slip-off under pressure
• Commonly used on water, drain, and vent hoses where space is limited
• Simple, spring-action design keeps consistent tension as hoses expand/contract

• Disconnect power and shut off water supply before servicing appliance
• Use pliers to expand the clamp, slide into position, then release to seat it
• Inspect hose and fitting for damage; replace hose if cracked or brittle
• Do not overtighten or modify the clamp; replace with the exact style/size for a proper seal

Secures hoses and prevents leaks in your dishwasher. Replace if you notice water pooling or loose connections. Verify fit with your model number.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.