Parts for Husqvarna 966690501: Mower Deck / Cutting Deck-61" Deck Parts

This is a pulley that is used on a zero-turn lawn tractor. It is also referred to as a mandrel pulley. This part spins the blade on the mower deck of the lawn tractor. A new pulley may be needed if the blade is not spinning on the mower deck. Inspect the pulley to check for any signs of cracks, breakage, or damage. There may also be grinding noises coming from the lawn tractor if the pulleys are bad. If there are any of these signs, the pulley will need to be replaced. The pulley is manufactured out of a high-quality metal material. Make sure to use gloves when replacing this part.This pulley is a genuine OEM Husqvarna part. It is sold individually. This particular pulley is compatible with zero-turn lawn tractors that are manufactured by the Husqvarna brand.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This part is a replacement hex bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a misplaced, stripped, or defective hex bolt in outdoor power equipment.Hex bolts are a standard piece of hardware that have many different uses. They are named for their hexagon-shaped heads and are critical for securely holding together different equipment parts but can become corroded, stripped, or misplaced, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex bolt is suitable for use on several outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This discharge chute is a genuine Husqvarna part, sold individually. This discharge chute can be used as a replacement part in a lawn mower. The purpose of the discharge chute in a lawn mower is to direct grass clippings away from the operator and from the deck when the clippings are discharged out of the appliance.The discharge chute in a lawn mower might need to be replaced by this genuine OEM replacement part if the chute can no longer dispel or hold grass clippings assembled while the appliance is in use. If the discharge chute is punctured, torn, ripped, scraped, dented, cracked, eroded, or otherwise damaged, the discharge chute must be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This discharge chute is compatible with the following outdoor appliance brands: Husqvarna.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

This idler arm is a genuine Husqvarna part, sold individually. This idler arm can be used as a replacement part in a lawnmower. This part secures the steering linkage while allowing it free range of motion. If the idler arm is punctured, dented, cracked, chipped, scraped, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part as soon as possible in order to ensure safe continued use.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This idler arm is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This part is a replacement hexagon screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current hexagon screw is broken, misplaced, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hexagon screws are a standard piece of hardware that get their name from the hexagonal shape of the screw head. They have multiple different uses. Screws are critical for properly securing parts of the equipment, and may require replacing if stripped, corroded, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hexagon screw, the appropriate owner's manual and equipment diagrams should be referred to. This hexagon screw is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. This part is sold individually.

This part is a replacement pivot bushing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or worn pivot bushing in a variety of lawn tractor models.Pivot bushings allow different components to pivot around one another without causing too much friction, vibration, or heat. Bushings are particularly subject to wear and tear and will likely need to be replaced when worn or ineffective in order for the lawn tractor to function properly. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this pivot bushing, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this pivot bushing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.