Parts for Husqvarna 96148006200: Mower Deck / Cutting Deck Parts

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This O-ring is an OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. An O-ring is a small but important piece of hardware. It is designed for use with outdoor lawn and garden equipment including lawnmowers and string trimmers. It is compatible with products made by the following brands: Craftsman, Husqvarna, Weed Eater, Ryobi, Poulan, Murray, and Ariens.The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring of material which is used as a gasket. It is designed to sit within a groove and be compressed during assembly. The reason for this is to create a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.Replacing a damaged O-ring is crucial if the equipment is struggling to start. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance. This O-ring is made out of neoprene.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

This authentic OEM replacement wheel assembly includes both the rubber tire and plastic wheel. Although it may seem simple, the wheel is a crucial component of a lawn mower that holds the blade up off of the ground and allows the operator to easily push the mower forward. Lawn mower wheels are generally made of plastic, and although the plastic is durable, it can become brittle over time. This is especially true if the lawn mower is used over rough terrain. Replacing a broken wheel is one of the easier repairs on a mower and will only require a screwdriver or socket wrench. Simply remove the old wheel, making sure not to lose the washer and bolt, and attach the new wheel. This part is compatible with most Husqvarna lawn mowers and is sourced from its original manufacturer. This part ships individually. It does not include any of the bolts or washers required to attach the wheel, so it is important that you have the required bolts before making the repair or purchase them separately.

This is a replacement belt cover. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace cracked, broken, or defective belt cover on a variety of different lawnmower models. The belt cover works to protect the belt, which in turn helps to drive the lawnmowers engine. Without a properly functioning cover, the belt can be easily damaged which will prevent the equipment from running effectively or starting up at all. Access to proper tools is required for replacing this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this belt cover, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this belt cover is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This front grass baffle is a genuine Husqvarna part, sold individually. This front grass baffle can be used as a replacement part for lawnmowers. This front grass baffle facilitates the process by which the grass cuttings accumulated while the lawnmower is in operation can be filtered through the mulch plug and be torn apart into fine mulch.The front grass baffle might have to be replaced after general wear and tear from long-term usage or as a result of a direct impact with a hard object that could warp the component beyond functionality. If the front grass baffle is accumulating and clogging up with grass clippings or if the grass clippings are not being sorted into the grass catching bag, the front grass baffle might have to be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This front grass baffle is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This part is a replacement v-belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It can be used to replace a snapped, worn, or defective v-belt in a variety of different lawnmower models.The v-belt allows the lawnmower to be driven by connecting the drive pulley of the transmission to the motor pulley. This helps to enable torque to be transferred from the transmission to power the equipment. This is a part that is subject to significant wear and tear and will likely require replacement over time or with regular equipment usage. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this v-belt, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this v-belt is suitable for use on several different models of lawnmowers manufactured by Husqvarna, Homelite, and Poulan. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are commonly found in different types of lawnmowers and are able to connect different parts together. These parts are then able to work together to ensure that everything is working efficiently within the engine and overall machine. A new pulley might be needed if the current one is damaged or not operating properly. Due to the nature of the pulley's job, it can easily become worn over time and need to be replaced. If the user hears unusual noises coming from inside the engine it can be due to a pulley not working properly. Be sure the engine is shut down before replacing this part. This pulley is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This part is a lower transmission spring. This lower transmission spring is an integral component needed for the self-propel or automatic drive function on outdoor power equipment. It is made of durable metal.A new lower transmission spring may be needed if the self-propel function is not working properly on a lawnmower or snow thrower. Another reason that a new lower transmission spring will be needed is if it is physically broken or damaged in any way. Sometimes the lower transmission spring needs to be replaced simply due to normal wear and tear after a long period of time and use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This lower transmission screw is used on lawnmowers and snowthrowers manufactured by Husqvarna, Poulan, Weed Eater, and Jonsered.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This mulch plug is a genuine Husqvarna part, sold individually. This mulch plug can be used as a replacement part for lawnmowers.The mulch plug might have to be replaced if it has been sufficiently damaged to the point that it can no longer serve its function. The operator of the lawnmower can tell if the mulch plug is no longer functioning if the clippings are not being deposited onto the lawn as mulch. If the mulch plug is not functioning as it should, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This mulch plug is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.