Parts for Husqvarna 96732440100: Mower Deck / Cutting Deck Parts

This is a replacement deck drive belt for use with select lawn tractors. The belts are used to drive the deck blades, which is what provides cutting power for the machine. Belts can also be used to drive power from the engine to the transmission. If the belt is broken or loose, owners will find that they have trouble with getting enough power from the machines, and it will not cut the grass properly.Over time, belts will start to wear down. They might become loose from use, they could crack, or they could even break. If this happens, the owner will need to replace the belt before they use the machine again. The difficulty of the replacement will vary based on the model.This replacement deck drive belt will work with some mower models from the brand Husqvarna. This is a genuine OEM replacement part that has been sourced from the manufacturer to ensure a proper fit. The belt is sold individually.

This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.

This genuine Husqvarna replacement part is a 5 inch mandrel pulley for use with riding lawn mowers. A properly functioning mandrel pulley is essential for the safe and reliable use of a riding mower. The pulley spins the blade on the mower deck of the tractor. The pulley may become worn out or damaged with extended use, necessitating replacement. Remember to check the pulley periodically to spot any wear or damage. This part is an identical replacement for a mandrel pulley that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Weed Eater, and more riding lawn mowers. Please note: original part number 199791 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a replacement bushing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn-out or defective bushing on a variety of different lawnmower models. This particular bushing is intended for use with the front suspension.This bushing is mounted on the suspension and helps to ensure the lawnmowers moves as smoothly as possible. Suspension bushings help to absorb bumps, as well as reduce vibration and noise. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools are required to replace this part. For more accurate information on how and where to install this bushing, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this bushing is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This replacement part is an eye bolt, or sometimes called a lawn mower bolt, intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Eye bolts are an important part in many lawn mowers as they are responsible for keeping different parts in place and secure so that the user is safe while operating the appliance.A new eye bolt might be needed if the current one is damaged or broken in any way. It is also possible for the eye bolt to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of a nut in a lawn mower is to serve as a small fastening component used in conjunction with a bolt.The nut in a lawn mower can be easily lost, misplaced, or stripped away from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb. The nut could be dented, punctured, scraped, cracked, chipped, or otherwise damaged to the point that it loosens from its placement and cannot be secured. If this occurs, the nut should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a genuine replacement lock nut from Husqvarna. Lock nuts are ideal for lawn and garden equipment and engines because they are designed to stay tight even under excessive pressure or vibration. Lawn mowers and other lawn equipment can produce a lot of vibrations during regular operation and lock nuts can assist in keeping everything in place. Over time, however, it can become worn or the lock feature could fail. Sometimes, the nuts are lost in the process of other repairs. The lock nut has numerous applications and locations, depending on the type and model of equipment. Consult the parts diagram for applications and replacement procedures. This genuine OEM lock nut is compatible with lawn mowers, trimmers, and snowblowers from Husqvarna, Weed Eater, Poulan, Craftsman, RYOBI, Murray, and Ariens. This part is standard hardware and is sold as an individual piece. Those who need additional lock nuts will have to purchase multiple quantities. A wrench or socket will be required to perform the replacement of this nut. Always wear gloves when performing repairs on lawn and garden equipment engines.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.