Parts for Dixon 96046001300: Mower Deck Parts

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This is a genuine replacement lock nut from Husqvarna. Lock nuts are ideal for lawn and garden equipment and engines because they are designed to stay tight even under excessive pressure or vibration. Lawn mowers and other lawn equipment can produce a lot of vibrations during regular operation and lock nuts can assist in keeping everything in place. Over time, however, it can become worn or the lock feature could fail. Sometimes, the nuts are lost in the process of other repairs. The lock nut has numerous applications and locations, depending on the type and model of equipment. Consult the parts diagram for applications and replacement procedures. This genuine OEM lock nut is compatible with lawn mowers, trimmers, and snowblowers from Husqvarna, Weed Eater, Poulan, Craftsman, RYOBI, Murray, and Ariens. This part is standard hardware and is sold as an individual piece. Those who need additional lock nuts will have to purchase multiple quantities. A wrench or socket will be required to perform the replacement of this nut. Always wear gloves when performing repairs on lawn and garden equipment engines.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This tension relief rod is a genuine MTD part, sold individually. This tension relief rod can be used as a replacement part in a lawn mower. The purpose of the tension relief rod in a lawn mower is to allow free range of motion for the idler pulley bracket such that the belt can be tightened while in rotation.If the tension relief rod is detached from the appliance or if the tension relief rod shows signs that it can no longer perform its function, it should be removed and replaced by this genuine OEM replacement part as soon as possible. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tension relief rod is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.