Parts for Husqvarna 96041039300: Mower Deck Parts

This part is a replacement suspension arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective suspension arm in a variety of lawn tractor models.The suspension arm makes the tractor more comfortable and easier to drive, as it absorbs impact and vibration when driving over rough or unterrain. If the suspension arm is worn, snapped, or otherwise defective, it should be immediately replaced. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this suspension arm, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this suspension arm is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

Note: This is ONE blade.

This part is a replacement hex head screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced screw on outdoor power equipment, although this screw is primarily intended for use with lawn tractors.Screws are a standard piece of hardware with multiple different uses. They are essential for holding together equipment components but can easily become lost, stripped, corroded, or otherwise damaged. In this case, screws will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex head screw, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex head screw is suitable for use on several models of small engine outdoor power equipment and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly.

This part fixes the following symptoms:

• Loose or wobbly components in the equipment
• Components not staying securely in place during operation
• Excessive vibration or rattling while using the equipment
• Difficulty in attaching or securing parts due to a damaged or worn-out bolt
   

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This part is a replacement mandrel pulley keeper. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken mandrel pulley keeper in lawn tractors.Mandrel pulley keepers help to hold the mandrel pulley in place. They are important for proper equipment functionality and should be replaced if broken, corroded, snapped, or otherwise rendered ineffective. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular mandrel pulley keeper, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This mandrel pulley keeper can be used with a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This torsion spring retainer is a genuine Husqvarna part, sold individually. This torsion spring retainer can be used as a replacement part in a lawn mower. This part secures and stabilizes parts within the mower. If the torsion spring retainer loses its basic functionality and cannot be easily repaired, the torsion spring retainer should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This torsion spring retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Ariens.

The idler arm is a genuine replacement part that is supplied from the manufacturer. This part is used on riding lawn mowers to help manage the shifting of the gears on the unit. The idler arm is attached to the mower housing and the belt guard and is used to engage the idle function. This durable metal arm is subject to repetitive motion and constant vibrations, which can cause it to crack or break over time. Impact damage could also occur. If the idler arm fails, the engine will not be able to work properly until it is replaced. A genuine OEM replacement like this part will resolve the issue. This OEM idler arm is manufactured by Husqvarna and can be used in select machines from Poulan, Husqvarna, Jonsered, and Weed Eater. The arm is sold as an individual part. Hardware and additional components will require an additional purchase. Replacing the idler arm will require a socket set and a screwdriver in most cases. It is a fairly simple job. Allow the engine to cool and work in a well-ventilated area when performing this repair.

This part is a replacement blade brake arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached blade brake arm in lawn tractors.The blade brake arm is what enables the user to stop the tractor blades from rotating when pressure is applied. This part is essential to safe and effective equipment functionality and thus should be replaced if dented, bent, snapped, or faulty in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this blade brake arm, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade brake arm can be used with different models of lawn tractors that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This part is a clutch assembly that is used for riding lawnmowers and lawn tractors. A clutch is a safety device that stops the blade from spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch assembly may be needed if the lawn tractor or riding lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch assembly is a genuine Husqvarna part. It is sold individually. This particular clutch assembly is compatible with riding lawnmowers and lawn tractors that are manufactured by the Poulan, Husqvarna, and Jonsered brands.

This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.

This part is a belt keeper. The belt keeper guides the path of a tractor belt that is between pulleys. The belt that these belt keepers hold is what transfers power to another pulley in the system, making the equipment run. A new belt keeper may be needed if the belt keeper is physically broken or damaged. If the belt routinely comes off of the belt keepers, this could be a sign that the belt keepers need to be replaced. Use caution when working with these parts. The operator should only perform care and maintenance on the machine when it is powered off. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. This belt keeper is compatible with lawn tractors manufactured by Husqvarna and Craftsman.

This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This is a manual cable clutch for use on many different kinds of lawn tractors and riding mowers. It is the part that connects the transmission lever to the idler arm on the deck of the mower. The sole purpose of this component is to engage and then to disengage the blades. It is for a machine with a manual clutch and includes the full assembly. This means it features the spring hook, connector clips with cable sheath, and the cabling itself. It is relatively simple to replace this item and requires an appropriately sized socket set. Made of rubber, metal, and wire, it is a genuine OEM part that ships individually as an assembly. It will work with brands like Poulan, Jonsered, Weed Eater, and Husqvarna, among others.

This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This vortex front baffle is an authentic OEM replacement part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. The vortex front baffle helps to guide the grass clippings away from under the deck and out the chute when cutting grass. Over time, the front baffle may become damaged from flying debris and stationary objects that crack or damage the plastic. If damage occurs or the baffle breaks away from the mower, it should be replaced.The vortex front baffle is attached to the mower deck and a wrench is required to remove and replace it. Make sure the lawnmower has not been operated prior to repairing the baffle. Once the engine cools, place the lawnmower on a ramp and use the wrench to remove the damaged baffle. Install the new baffle using the old hardware if new hardware was not ordered. Take the lawnmower off the ramps and test the baffle by cutting the grass and checking to see if the baffle guides the clippings out of the chute.This vortex front baffle is a high-quality black plastic part that is sold individually. It does not come with hardware for attaching the baffle to the mower. This vortex front baffle is designed for use on lawnmowers manufactured by Husqvarna, Poulan, Weed Eater, and Jonsered.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.