Parts for Husqvarna 96043032000: Mower Deck Parts

This replacement part is a mandrel assembly. This is a genuine replacement part made by Husqvarna. This part is used to help rotate certain parts within the engine. A new mandrel assembly might be needed if the current one is missing or damaged including being dented or cracked. If the part is unable to complete the turning mechanisms than it might be time to replace this part. Be sure the engine is turned off before starting this repair as injury might occur if the user is not careful. Be sure to refer to the appropriate user guide for more specific information on how to replace this part. Work gloves are also recommended during this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. This is a genuine OEM replacement part.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.

This nose roller is a genuine Husqvarna part, sold individually. This nose roller can be used as a replacement part in a lawn mower. This part props the front of the mower deck up.The nose roller could be subject to damage in the form of puncturing, tearing, ripping, scraping, denting, or eroding; if any of these forms of damage prevent the nose roller from protecting the deck, the nose roller should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This nose roller is compatible with the following outdoor appliance brands: Husqvarna, Jonsered, Craftsman, and Poulan.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.

The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly.

This part fixes the following symptoms:

• Loose or wobbly components in the equipment
• Components not staying securely in place during operation
• Excessive vibration or rattling while using the equipment
• Difficulty in attaching or securing parts due to a damaged or worn-out bolt