Parts for Husqvarna 96045005700: Mower Deck Parts

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This replacement part is a pulley. It is a genuine replacement part made by Husqvarna. This specific pulley is found in different appliances that require moving parts during use. Pulleys typically help in the movement between two parts so that the entire appliance is able to work effectively. A new pulley might be needed if the current one is not working properly or is damaged in any way. If the part is not working as well as normal, it could lead to excessive friction between components and eventually overheating or greater damage. If the user notices unusual noises coming from inside the machine it might be due to a malfunctioning idler pulley. Be sure to refer to the correct user manual prior to replacing this part. This part is sold individually. This pulley is sourced directly from the manufacturer. It is also a genuine OEM replacement part.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.

This part is a gauge wheel. A gauge wheel helps support the mower deck of lawnmowers and lawn tractors. The gauge wheel is also what allows the lawnmowers and lawn tractors to move.A new gauge wheel may be needed if the old one is physically broken or damaged in any way. The gauge wheel may need to be replaced after prolonged use due to build up of normal wear and tear. One of the most common ways that the gauge wheel is broken is when the lawnmower or lawn tractor runs over a small stump or concrete. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. The gauge wheel is compatible with lawnmowers and lawn tractors manufactured by Husqvarna, Rigid, Poulan, and Jonsered.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This replacement part is a washer. Washers typically work with other small parts like screws or nuts to secure components within equipment.Over time and with regular use, washers can occasionally become worn down or damaged, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This suspension mower arm is a genuine Husqvarna part, sold individually. This suspension mower arm can be used as a replacement part or a lawn tractor. The purpose of the suspension mower arm is to absorb the shock impact generated when the appliance is driven on bumpy ground.The suspension mower arm might have to be replaced if there is damage that renders the component beyond functionality. If the suspension mower arm is punctured, cracked, scraped, or eroded over time from general wear and tear or if the component is subject to a direct impact with a hard object that warps it, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This suspension mower arm is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Weed Eater.

This hex nut is a genuine Husqvarna part, sold individually. This hex nut can be used as a replacement part in a lawn mower. The purpose of the hex nut in a lawn mower is to secure a component to another component in conjunction with a bolt so that, during the standard operation of the lawn mower, the components do not move from their position of stable placement.The hex nut in a lawn mower is a small component, and its size means that it can be easily lost, misplaced, or stripped from general wear and tear with long-term use. The hex nut could also be damaged as a result of a collision with a hard object such as a rock or a curb. If any of this occurs, the hex nut should be replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This nose roller is a genuine Husqvarna part, sold individually. This nose roller can be used as a replacement part in a lawn mower. This part props the front of the mower deck up.The nose roller could be subject to damage in the form of puncturing, tearing, ripping, scraping, denting, or eroding; if any of these forms of damage prevent the nose roller from protecting the deck, the nose roller should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This nose roller is compatible with the following outdoor appliance brands: Husqvarna, Jonsered, Craftsman, and Poulan.

This rod roller nose, also sometimes referred to as an axle, is a genuine Husqvarna part. It is a replacement part for lawn mowers.This part attaches to the deck of the mower and prevents it from running into the ground while in operation. This prevents damage to other parts of the mower and can also help prevent an accident. It is not uncommon for the rod roller nose to become damaged or break as a result of normal wear and tear, especially under heavy use or after several years.This rod roller nose is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for compatibility with mowers made by Husqvarna and Poulan.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.

This replacement part is an eye bolt, or sometimes called a lawn mower bolt, intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Eye bolts are an important part in many lawn mowers as they are responsible for keeping different parts in place and secure so that the user is safe while operating the appliance.A new eye bolt might be needed if the current one is damaged or broken in any way. It is also possible for the eye bolt to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This is a replacement spring that has been directly sourced from the manufacturer. The spring is a replacement part for the mower deck idler on lawnmowers and tractors. The spring is used to hold the mower deck idler in place while allowing it to move slightly. This spring and the connecting parts should be checked regularly as they are subject to normal wear and tear. Failure to do so may cause damage to other parts of the mower and cause them to need replacement or repair. Always practice safety when replacing these parts. Ensure the mower has cooled down enough to avoid burns and wear gloves to protect hands from the blades. To replace this spring, remove the mower deck and any other parts blocking it. The parts needing to be removed will vary based on the model. The spring is a genuine original equipment manufacturer OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, Jonsered, and AYP.

This spindle shaft assembly is a genuine Husqvarna part, sold individually. This spindle shaft assembly can be used as a replacement part for a lawn mower. The purpose of a spindle shaft assembly is to maintain the placement of the spindles so they can freely rotate along with the blades of the appliance.Damage could come in the form of puncturing, scraping, cracking, denting, or erosion. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle shaft assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Ariens, and Dixon.