Parts for Poulan HDC185H46A: Mower Deck Parts

Spindle shaft with bearing assembly rotates mower blades under the deck. Replace if blades wobble, vibrate, or spin unevenly. Verify fit with your model.

Fix uneven cuts or deck vibrations with this mandrel housing. Houses the spindle assembly that connects your mower blade to the deck drive system.

Grass clipping deflector cover for riding mower tractors. Covers the discharge port on the mower deck. Replace if cracked, broken, or damaged.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Mandrel pulley for riding mower tractors. Mounts on the mower deck spindle to drive cutting blades. Replace if cracked, worn, or damaged.

Screw for riding mower tractors. Secures various components and panels. Replace if lost, stripped, or corroded to maintain proper assembly.

Deck idler pulley guides the mower belt on riding lawn tractors. Replace if belt slips, falls off, or pulley wobbles. Confirm fit with your model number.

This is an idler pulley. It is a genuine Husqvarna part. It is a replacement part for lawn tractors and riding mowers. The idler pulley allows the engine to start by applying tension to the blade belt. It is not uncommon for the pulley to become damaged through normal wear and tear, and it can also be damaged in an accident. If this happens, the machine may not start properly or at all. Check the user manual for instructions for replacing it. Some disassembly of the mower deck may be required. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug before attempting any repair.This pulley is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Husqvarna, Craftsman, and Poulan.

Replacement mandrel cover for riding mower tractors. Protects the spindle mandrel assembly on the mower deck. Replace if cracked, broken, or missing.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

This brake arm assembly is a genuine Husqvarna part, sold individually. This brake arm assembly can be used as a replacement part in a lawn mower. The purpose of the brake arm assembly in a lawn mower is to apply force upon the drive pulley that rotates the blade so that when the operator disengages the blades through the control cable, the blades cease their typical rotation.The brake arm assembly might need to be replaced if the brake arm assembly can no longer perform its standard function due to damage. This damage could take the form of puncturing, scraping, denting, cracking, warping, or eroding, and if this occurs, the brake arm assembly should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This brake arm assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

Shoulder bolt for riding mower tractor assembly. Replaces worn, stripped, or missing 5/16-18 bolts. Essential hardware for secure component mounting.

Return spring for riding mower tractors. Replaces worn, broken, or missing springs. Restores proper tension and operation to linkage components.

Shift arm knob for riding mower tractors. Installs on the shift lever for comfortable gear changing. Replace if cracked, broken, or missing.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

Idler pulley for riding mower tractors guides and tensions drive belts. Replace if worn, cracked, or causing belt slippage. Verify fit with model number.