Mtd Chipper Shredder Parts

Replacement fuel cap assembly for mowers, tillers, and outdoor power equipment. Installs on fuel tank to seal and prevent spills. Needed when cap is cracked, broken, or missing retainer.

Hydraulic inlet hose for log splitters. Connects hydraulic pump to system. Replace if cracked, leaking, kinked, or damaged to restore proper fluid flow.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

Sponge air filter prevents dirt and debris from reaching your engine. Replace when dirty or damaged to avoid carburetor clogs and performance loss.

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

This cutting wheel assembly sits inside the chipper shredder housing to break down yard debris into smaller pieces. Replace when blades become dull, chipped, or the wheel wobbles excessively during operation.

Black debris collection bag for chipper shredders and lawn vacuums. Replace if ripped, torn, or has holes. Installs on discharge chute to collect clippings.

Hopper collar that connects the hopper assembly to the impeller housing on chipper shredders. Replace if cracked, broken, or missing to protect components.

Hex flange bearing supports rotating shafts in riding mowers and tractors. Replace when you notice grinding noise or rough rotation. Verify fit with your model.

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Wire harness assembly for chipper shredders and lawn equipment. Connects electrical components throughout the unit. Replace if wires are frayed or damaged.

Replacement discharge chute assembly for chipper shredders. Directs debris away from machine during operation. Replace if cracked, broken, or missing.

This wheel assembly is a genuine MTD part. It is meant as a replacement wheel on several makes and models of lawn tractors. Replacing the wheel is a relatively simple process, though it may require some special equipment.This wheel assembly is a genuine OEM part sourced directly from the manufacturer and is sold individually. Lawn tractors obviously have more than one wheel. Even if the wheel was damaged in an accident, check the others for wear and tear. It is very common for worn-out wheels to be more prone to damage than newer ones. What is more, it can be unhealthy for the machine to operate on unequal wheels. It is normal for the wheels on a lawn tractor to need to be replaced over time.This wheel assembly is designed for compatibility with many models of lawn tractors manufactured by Bolens, Brute, Columbia, Huskee, Husky, MasterCut, Murray, MTD Gold, White Outdoor, Yard Machines, and Yard-Man. Since there are so many models that this wheel assembly may work with, use the compatibility checker before purchasing.

This beige wheel cog is a genuine MTD replacement part. A wheel cog is a component of a self-propelled or push lawn mower, chipper shredder, or snow blower. This replacement part is ideal for basic maintenance for home appliances such as lawn mowers, chipper shredders, and snow blowers. These wheel cogs may be subject to damage and natural wear and tear over time. Signs of damage can include grinding or grating noises, shaking steering wheels, and uneven wear on tires that is visible to the naked eye. In cases of damage to multiple wheels on appliances, several replacement wheel cogs will need to be ordered. One will need a small flat-blade screwdriver, a socket wrench, and a dry lubricant such as graphite in order to replace a wheel cog on a lawn mower, chipper shredder, or snow blower. Always wear gloves when working with or repairing outdoor equipment. This genuine MTD wheel cog replacement works with the brands Cub Cadet, MTD, Yard Machines, Huskee, Yard-Man, and Bolens. It is an OEM authorized part manufactured in the US, fitting many MTD models.

This is a replacement hex screw sourced from the manufacturer. The hex screw is used in numerous machines, including lawnmowers, tractors, and tillers.Hex screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to mower and cause other parts to need replacement.Before checking the screws, make sure the mower has cooled off to avoid burns. They can be tightened with a rachet or an adjustable wrench. The hex screw is a genuine OEM replacement part. It is designed to be used with Craftsman, Troy-Bilt, Cub Cadet, MTD, Yard Man, and other brands.