Mtd Engine Parts

Carburetor assembly for snow thrower engines. Installs on the engine block to mix air and fuel. Replace if cracked, damaged, or leaking fuel.

Lawn mower won't stay running or struggles to start? This carburetor assembly regulates air and fuel mixture to your engine for reliable performance.

Fix engine starting problems, rough idling, or poor acceleration with this carburetor rebuild kit. Restores proper fuel mixture for smooth operation.

Replacement carburetor assembly for small lawn and garden engines. Includes gaskets. Restores proper fuel-air mixture when original is damaged or worn.

Controls gas emissions from small engines on lawn equipment. Replace if cracked, saturated, or engine fails emissions. Confirm fit with your model number.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

Plastic cover that snaps over the air filter assembly on lawn and garden engines. Replace if cracked, broken, or missing to protect the filter from dirt.

Prevents fuel leaks if your equipment tips over. This roll over valve is a critical safety component for small engines. Straightforward installation.

Engine won't shut off or runs after ignition is turned off? This fuel shut off solenoid valve kit controls fuel flow. Includes gaskets for install.

This is a genuine OEM carburetor rebuild kit sourced directly from the manufacturer and is intended for use with lawn tractors. This rebuild kit saves money when the carburetor is not working up to its full potential. If the carburetor is clogged, it won't get enough fuel and the engine won't run efficiently. The carburetor creates the air and fuel mixture that causes the cylinders to ignite and run the engine. If any of the seals or gaskets are worn and fuel leaks from the carburetor or air gets inside, the ratio of fuel to air will be off and the engine may sputter or not run at all. Before rebuilding the carburetor, you can test it to determine if it needs to be repaired or if there are other potential issues. First, remove the air filter from the lawn tractor and pour a little gas directly into the carburetor. Start the engine. If the engine dies quickly after starting, the carburetor should be rebuilt. This kit contains all the gaskets and o-rings needed to rebuild the carburetor. Make sure there is no fuel in the engine when you work on the carburetor.This kit is made to be compatible with lawn tractor engines manufactured by Yard Machines, MTD, Cub Cadet, Husky, Yard-Man, and Troy Bilt. It is sold as an individual unit.

Won't start or pull cord broken? This recoil starter assembly restores easy starting on snow throwers. Moderate DIY repair, typically 30-45 minutes.

Won't start or pull cord snapped? This recoil starter assembly engages the flywheel to start your mower, tiller, or chipper. Moderate DIY repair.

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This choke temperature control gasket is an authentic OEM replacement part sourced directly from the manufacturer for use small engines that utilize a choke. The temperature control gasket helps to create a seal inside the choke that prevents air from seeping in or out of the choke. If the gasket is worn or damaged, air and contaminants could infiltrate the choke and cause the choke to fail. The choke temperature control gasket should be inspected and replaced if it is damaged. The choke uses a mixture of fuel and air to start the engine combustion process. If the choke temperature control gasket is not fully functioning, too much air could get in, and the ratio would not be optimal for the ignition process. If the engine is rough starting or starts and dies quickly, the choke's gaskets should be inspected and replaced as needed. Wear gloves when working on the choke and ensure that the spark plug is removed to prevent accidents.This choke temperature control gasket is sold as an individual part. It is designed for use in small engines that utilize a choke manufactured by MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt.

Carburetor assembly for walk-behind mowers and wheeled trimmers. Replaces cracked, damaged, or worn carburetors that affect fuel mixing and delivery.