Mtd Gold Edger Parts

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This flange bearing fits tightly between two connected components to create an airtight seal in a variety of types of lawn and garden equipment. With time and use of the equipment, the flange bearing can start to become damaged, break, or may be lost. When this occurs, the flange bearing will need to be replaced.Place the equipment on a flat surface and disconnect the spark plug wire. The location of the flange bearing will vary based on the equipment being used, so condult the user manual. Disassemble the tool as needed to get access to the flange bearing. It can be removed using a set of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Replace the components and connect the spark plug wire.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual item. The flange bearing can be used with lawnmowers, edgers, and snowblowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Montgomery Wards, Yard Machines, and MTD.

Seals and insulates the carburetor from engine heat on lawn mowers and outdoor power equipment. Replace if cracked, worn, or causing air leaks.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

Bell washer for lawn mowers and tractors. Installs to secure components and prevent loosening. Replace if cracked, worn, or missing for proper assembly.

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Replace your worn, broken, or missing throttle linkage spring. This small spring connects to the carburetor linkage on mowers, tillers, and engines.

Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.

Replacement fastener for lawn mowers and outdoor power equipment. Secures components and panels. Order a new one if yours is stripped, missing, or damaged.

This carbon canister filter can be used to replace old filters that are no longer functioning properly. Carbon canister filters need to be replaced regularly in order to ensure outdoor power equipment runs efficiently. Filters are essential for keeping dirt, debris, and harmful materials from ruining an engine. Without carbon canisters, outdoor power equipment can experience decreased fuel efficiency whilst also contaminating the air with more pollutants from the engine. While an engine is running and even after it has been turned off, fuel vapors rise from the fuel tank and pollute the air. Carbon canisters are essential for trapping these vapors and preventing them from being released. Without a clean, well-functioning filter, carbon canisters cannot work efficiently.This carbon canister filter is a genuine replacement part sourced directly from the manufacturer. This replacement carbon canister filter fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

Governor spring for small engines on mowers, tillers, and outdoor power equipment. Connects to throttle linkage. Replace if stretched, broken, or missing.

Seals the engine crankcase to prevent dirt and debris entry while keeping oil contained. Replace if worn, cracked, or leaking. Confirm fit with your model.

Seals combustion chamber between cylinder head and engine block. Replace if oil leaks, overheating, or poor compression occur. Verify fit with model number.

Foam handle grip for lawn mowers and tillers. Replaces worn, torn, or missing grips on control handles. Provides cushioned comfort and secure hold.