Mtd Gold Lawn Mower Parts

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This flange bearing fits tightly between two connected components to create an airtight seal in a variety of types of lawn and garden equipment. With time and use of the equipment, the flange bearing can start to become damaged, break, or may be lost. When this occurs, the flange bearing will need to be replaced.Place the equipment on a flat surface and disconnect the spark plug wire. The location of the flange bearing will vary based on the equipment being used, so condult the user manual. Disassemble the tool as needed to get access to the flange bearing. It can be removed using a set of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Replace the components and connect the spark plug wire.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual item. The flange bearing can be used with lawnmowers, edgers, and snowblowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Montgomery Wards, Yard Machines, and MTD.

A ball bearing is a rolling element bearing that uses balls to maintain the separation between the bearing races. This part is designed for use with outdoor lawn and garden power equipment such as snowblowers, chippers, shredders, and tillers. It is compatible with products by brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.The ball bearing part is crucial because its purpose is to reduce rotational friction while supporting radial and axial loads. Without functioning ball bearings, valuable outdoor equipment would fall apart and quickly stop working. That is why it is important to get any ball bearings replaced if they are worn out or malfunctioning.This ball bearing is made out of metal. The ball bearing is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

The muffler on lawnmowers prevents neighbors from becoming overly upset when the grass is cut early in the morning. When the engine starts on the lawnmower, the combustion releases burnt gas, making a very loud noise. The muffler dissipates the noise to make the lawnmower run more quietly. Over time, heat from the exhaust and constant exposure to the elements may cause the muffler to rust and possibly have holes that increase the noise. If this happens, the muffler should be removed and replaced to keep the noise to a minimum. Wait for the engine to cool so that the muffler is cool to the touch. Wear work gloves and have a socket set and adjustable wrench available. Remove the muffler screws and set them aside to use on the new muffler. Remove the damaged muffler from the mounting bracket. Install the new muffler on the mounting bracket using the mounting screws from the old muffler. Tighten the screws and start the lawnmower to ensure the muffler is installed correctly. This muffler is a silver metal part that is sold as one unit. It does not come with attachment screws. It is designed for use on lawn mowers manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Husky.

This muffler is a genuine OEM replacement part sourced directly from the manufacturer for use on lawn and garden equipment. It reduces the noise coming from the exhaust. Being a metal part exposed to the elements, it is not uncommon for mufflers to corrode over time and need replacement. As a lawnmower part, the muffler may sustain damage from debris in the yard while mowing. In either case, the muffler should be removed and replaced to keep the noise level to a minimum.The engine and damaged muffler should be cool to the touch before repairing the lawnmower. Wear work gloves and safety goggles. Remove the spark plug from the lawnmower for extra safety. Locate the bolts securing the muffler to the lawnmower and loosen them to remove the muffler. Dispose of the old muffler and align the new muffler with the bolts. Attach the new muffler and tighten the nuts. Put the spark plug back in the lawnmower. This muffler is a high-quality metal part that is individually sold. It does not come with hardware. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, and Husky.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.