Mtd Gold Lawn Mower Parts

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

Hex flange bearing provides support for lawn tractor spindle assemblies. Replace if worn, loose, or causing wobble. Confirm fit with your model number.

Hardware spacer for lawn mowers. Installs on shafts to create proper gaps between connections. Replace if cracked, damaged, or missing for correct fit.

Exhaust muffler for lawn mowers and tractors. Reduces engine noise during operation. Replace if cracked, rusted, or excessively loud from wear or damage.

Thumb screw that secures the air cleaner assembly on lawn mower and small engines. Replace if damaged, stripped, or missing due to vibration.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

Replacement muffler stud assembly for lawn mowers, tillers, and small engines. Secures the muffler to the engine block. Replace if broken or missing.

Air cleaner housing shields your engine from dirt and debris. Replace if cracked or damaged to maintain proper filtration. Verify fit with your model number.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

External gasket kit seals carburetor and engine surfaces on lawn equipment. Replace when you notice fuel leaks or loss of compression. Verify fit with your model.

Replace your lawn mower's air filter to maintain engine performance and fuel efficiency. Dirty filters reduce power and increase consumption.

Fix hard starting, rough idling, or engine stalling issues with this carburetor assembly. Fits gas, push, and self-propelled walk-behind mowers.

Ignition coil for small engines on lawn and garden equipment. Replace if cracked, damaged, or worn. Includes spark plug boot and wire assembly.

This starter relay assembly is a genuine MTD part, sold individually. This starter relay assembly can be used as a replacement part in a lawn mower. The purpose of the starter relay assembly in a lawn mower is to serve as a circuit breaker, diverting battery power and starting the small engine of the appliance.The starter relay assembly might have to be replaced if it shows clear signs of damage within the standard lifespan of a lawn mower. Signs of damage to a starter relay assembly can include a lawn mower that will not start, a starter that remains powered on after the engine starts, or unusual clicking sounds, among other potential signs. If any of these signs of damage are attributable to a damaged starter relay assembly, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This starter relay assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Man.

Fix engine starting problems, rough idling, or stalling issues with this lawn mower carburetor assembly. Regulates fuel mixture for smooth operation.

Engine racing or won't maintain steady speed? This governor spring controls engine RPM on walk-behind mowers. Simple DIY fix in under 30 minutes.