Mtd Gold Log Splitter Parts

This replacement part is a dislodge bracket, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This part is commonly found in log splitters and is what helps complete the splitting mechanism. The bracket helps to cut the pieces of wood depending on the settings of this appliance. A new dislodge bracket might be needed if the final step in the log splitting process is not being completed. This means that the bracket is not functioning properly. Be sure the machine is cooled down and powered off before attempting this repair. Because parts of log splitters are sharp and can be dangerous, be sure to wear working gloves while completing this job.This part is sourced directly from the manufacturer. This is a genuine OEM replacement part and is told individually. Reference the appropriate user guide for more specific instructions on how to replace this part.

This genuine OEM muffler assembly is sourced directly from the manufacturer for use in small engines on outdoor lawn and garden equipment. Mufflers are not required for a machine to run, but the noise produced when a machine has no muffler can be damaging to hearing. Also, in some areas, there are noise ordinances that make mufflers necessary when working outside. Mufflers also provide a level of safety by blocking sparking and backfiring to prevent fires. Grass, leaves, and other yard debris can be dry and very quickly become a fire hazard if ignited by sparks. During operation, the noise level of the machine is a good indicator of muffler damage. Normal wear and tear can cause the muffler to become clogged. Running over sticks and rocks can lead to cracks and bends that cause it not to work properly. Replacement is easy and takes very little time. Use a screwdriver to remove the engine cover. Next, remove the bolts attaching the muffler to the machine. Remove and discard the old unit. Wipe the machine to remove dirt and debris before installing the new muffler. Install the new muffler and reinstall the engine cover.The muffler assembly is sold as an individual unit. It is designed for use on tillers, log splitters, and other small engines. It is compatible with Craftsman, Cub Cadet, MTD, MasterCut, and Yard Machines.

This short block assembly is a genuine OEM replacement part sourced directly from the manufacturer for use with the engine in many lawn and garden machines. The camshaft, crankshaft, piston, rod, valves, and governor are included in the kit. The gasket replacement kit is also included in the assembly. Damaged engines are costly and time-consuming to rebuild. Replacing the short block assembly is a less expensive option. Damage to the crankshaft is common in outdoor lawn and garden equipment. Rocks, sticks, and other debris can get caught in the engine and damage the camshaft or crankshaft. When this occurs, replacing the short block is easier than taking the entire short block apart to replace the damaged part. If the crankshaft is damaged, there is no reason to replace the entire engine when a replacement short block assembly will provide necessary repairs at a lesser cost.This short block assembly is sold as an individual part. It comes pre-assembled and ready to install. This assembly is designed for use in leaf blowers, log splitters, tillers, wood chippers, and other small engines manufactured by Cub Cadet, MTD, Yard Machines, and Troy-Bilt.

This genuine OEM complete engine gasket kit is sourced from the manufacturer for use in tillers, blowers, chippers, and other outdoor lawn and garden machines. The kit contains all the gaskets that are required to fit in and on the many different parts of the engine. These gaskets provide protection from outside elements that could interfere with engine performance, such as rain or debris. These gaskets also keep fluids and air from leaking out of the engine, which can reduce engine performance as well. Engine gaskets should be inspected and maintained to ensure proper engine performance. The gaskets are made of materials intended to withstand high heat, like silicone, cork, rubber, or paper, depending on where it is installed. Over time, the gaskets may become worn, cracked, or torn and need to be replaced. A screwdriver is required to remove the engine cover to access the various gaskets. This complete engine gasket kit allows for the replacement of all gaskets. Clean old grease from the engine before installing the new gaskets. Add new lubricant before installing the new gaskets. Replace the engine cover and tighten screws. This gasket kit is sold as one unit. This gasket kit is designed for various MTD, Cub Cadet, Troy-Bilt, and Yard Machines engines.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.