Mtd Gold Log Splitter Parts

Dislodge bracket for log splitters. Installs on the splitting mechanism to help cut and separate wood pieces. Replace if cracked, bent, or broken.

Muffler assembly for small engines on lawn and garden equipment. Reduces noise during operation. Replace if cracked, rusted, or damaged for quieter use.

This short block assembly is a genuine OEM replacement part sourced directly from the manufacturer for use with the engine in many lawn and garden machines. The camshaft, crankshaft, piston, rod, valves, and governor are included in the kit. The gasket replacement kit is also included in the assembly. Damaged engines are costly and time-consuming to rebuild. Replacing the short block assembly is a less expensive option. Damage to the crankshaft is common in outdoor lawn and garden equipment. Rocks, sticks, and other debris can get caught in the engine and damage the camshaft or crankshaft. When this occurs, replacing the short block is easier than taking the entire short block apart to replace the damaged part. If the crankshaft is damaged, there is no reason to replace the entire engine when a replacement short block assembly will provide necessary repairs at a lesser cost.This short block assembly is sold as an individual part. It comes pre-assembled and ready to install. This assembly is designed for use in leaf blowers, log splitters, tillers, wood chippers, and other small engines manufactured by Cub Cadet, MTD, Yard Machines, and Troy-Bilt.

This genuine OEM complete engine gasket kit is sourced from the manufacturer for use in tillers, blowers, chippers, and other outdoor lawn and garden machines. The kit contains all the gaskets that are required to fit in and on the many different parts of the engine. These gaskets provide protection from outside elements that could interfere with engine performance, such as rain or debris. These gaskets also keep fluids and air from leaking out of the engine, which can reduce engine performance as well. Engine gaskets should be inspected and maintained to ensure proper engine performance. The gaskets are made of materials intended to withstand high heat, like silicone, cork, rubber, or paper, depending on where it is installed. Over time, the gaskets may become worn, cracked, or torn and need to be replaced. A screwdriver is required to remove the engine cover to access the various gaskets. This complete engine gasket kit allows for the replacement of all gaskets. Clean old grease from the engine before installing the new gaskets. Add new lubricant before installing the new gaskets. Replace the engine cover and tighten screws. This gasket kit is sold as one unit. This gasket kit is designed for various MTD, Cub Cadet, Troy-Bilt, and Yard Machines engines.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.

Oil drain plug with washer for lawn mowers and outdoor power equipment. Replaces cracked, stripped, or missing drain plugs to prevent leaks.

The governor rod is a genuine replacement part found on select models of snowblowers. This rod is responsible for connecting the throttle cable and throttle body, helping to open and close the throttle to change the speed of the engine. This durable metal rod is exposed to repetitive motion and constant vibrations, which can cause damage or wear over time. If this rod does not function, the throttle will be unable to be controlled and that can affect the use of the equipment. Replacing the governor rod with this genuine part will guarantee an exact fit for compatible units. This genuine governor rod is manufactured to specific OEM standards and can be used in compatible machines from Cub Cadet, MTD, Yard Man, Craftsman, Troy-Bilt, Yard Machines, and HUSKEE. The part can be found in snowblowers, with hundreds of possible models that can take this governor's rod. It is made of durable metal and sold as an individual unit. No additional components or hardware are included, and any additional parts will require a separate purchase. Always wear gloves and perform engine repairs only when the machine has had time to cool. Be sure to disengage the engine before doing any work for safety, as well.