Need Help?
Call or text
Usually ships within 4 - 14 days
Replacement muffler stud that secures the muffler to the engine body. Replace if loose, stripped, rusted, corroded, or missing from your equipment.
This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.
Exhaust piping connects to the muffler system on small engines. Replace if cracked, corroded, or damaged to restore proper exhaust routing and function.
Tiller belt that drives the tines for soil cultivation. Replace when worn, cracked, or slipping to restore proper tilling performance. Verify fit with your tiller model number before ordering.
Complete fuel tank assembly for snow throwers and tillers. Includes tank and mounting hardware. Replace if cracked, leaking, or damaged during storage.
Tiller won't turn soil or tines not rotating? This shaft assembly provides the mounting point for tines. Moderate DIY repair for most tillers.
Wheel drive shaft assembly for rear-tine tillers. Connects the drive system to the wheel axle. Replace if bent, damaged, or worn to restore proper wheel mounting.
Tiller won't move or wheels slip? This sprocket assembly connects gears to wheels for proper drive function. Replaces damaged or broken sprockets.
M6 x 1 flange bolt for outdoor power equipment. Secures engine covers, handles, and components. Replace if stripped, rusted, or missing threads.
Replacement carriage bolt for lawn mowers and tillers. Secures components to frame and housing. Replace when bolt is stripped, missing, or damaged.
This replacement part is an input shaft. It extends from the front of the transmission and carries the drive from the engine. This allows the user to operate the machine properly during use. A new input shaft might be needed if the current one is no longer working. If the engine is struggling during use, it might be time to replace the input shaft. Be sure to wear work gloves when working with the engine to ensure safety during use. This is a genuine replacement part made by MTD. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.
Replace your tiller's worn spur gear if you're experiencing power loss or grinding noises. This small gear connects internal components to transfer energy.
The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.
Compression spring for rear-tine tillers. Replaces worn, broken, or missing springs in the drive assembly. Essential structural component for tiller.
This replacement part is an extension spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This extension spring is found in different types of lawn mowers and helps other parts to work together and allow the engine to run properly and smoothly.A new extension spring might be needed if the current one is damaged or missing from the appliance. Because of the nature of the extension spring, it is not unusual for it to become stripped or snapped due to normal wear and tear within the machine. Unusual sounds may come from inside the machine if this spring is not working properly. This is a genuine OEM replacement part and is sold individually. This spring is sourced directly from the manufacturer to ensure proper fit.