Mtd Log Splitter Hose, Tube & Fitting

This nipple pipe is a genuine MTD part, sold individually. This nipple pipe can be used as a replacement part for lawn mowers, edgers, log splitters, and wood chippers. The purpose of a nipple pipe is to serve as a fastening connector for various components with female threads, as nipple pipes have male threads on either end.The nipple pipe is a small component, so it can easily be lost or misplaced while the outdoor appliance is in operation. Additionally, the nipple pipe can be stripped over time so it cannot fasten components to one another. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This nipple pipe is compatible with the following outdoor appliance brands: MTD, Yard Machines, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and MasterCut.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

This exhaust piping is a genuine OEM replacement part sourced directly from the manufacturer; it is used on tiller engines and other small engines. The exhaust piping is part of the muffler system. It connects to the exhaust manifold. As gas is combusted to run the engine, it is forced out through the exhaust manifold and the exhaust piping. This process heats the pipes for a short period. Over a period of time, this repeated heating can cause the exhaust piping to deteriorate. If this happens, the piping will need to be replaced in order for the exhaust manifold to function correctly. If the engine is experiencing overheating problems, the exhaust pipes will need to be replaced when it is fixed. Overheating will cause them to deteriorate much faster than normal.Allow the engine and exhaust manifold to cool before replacing the exhaust piping. Remove the exhaust pipes from the exhaust manifold. Inspect the manifold for visible signs of damage while the pipes are off. This would be a good time to replace the exhaust manifold gasket. Install the new pipes. The exhaust piping is made of durable black plastic and sold as an individual unit. It is compatible with tillers, chipper shredders, snowblowers, and other small engines manufactured by Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.

This is a genuine OEM primer hose replacement part sourced directly from the manufacturer. It is used on tillers and other outdoor power equipment with a primer bulb assembly. The hose is the part of the assembly that runs from the fuel tank to the carburetor. When the primer bulb is pressed, fuel is collected from the tank and pushed into the carburetor to start the engine. Any unused fuel is released back into the fuel tank. If the primer hose has cracks or holes in it, the vacuum inside the hose will be lost and the primer bulb will not force the fuel to the carburetor. These cracks or holes can occur over time due to fuel eroding the hose material. If the primer bulb is not working and fuel cannot be seen in the tube, the primer hose should be inspected and replaced if necessary.Before replacing a primer hose, empty the fuel from the fuel tank and fuel lines into a clean container. Remove the spark plug. Remove and replace the primer hose. After refueling, check the primer bulb to ensure the primer hose is pulling fuel. This primer hose is clear plastic material; it is sold as an individual unit. This hose is compatible with tillers, chippers, shredders, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.