Need Help?
Call or text
This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.
Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.
This is a carburetor insulator that is used in snowblowers. It is designed to act as a spacer between the cylinder assembly and the carburetor. It is made of durable materials but can experience wear and tear or other types of damage through regular use. If there is an issue with this component, the engine may run hot, run rough, or hard start.When replacing the carburetor insulator, tools like a socket set and a pair of pliers will be needed. It is also useful to have a pair of work gloves available for the repair. The snowblower should be placed on a stable flat surface and turned off. The spark plug wire should be disconnected before making this project. Access the carburetor and remove it to get to the insulator. It can be removed and replaced with a new component.This carburetor insulator is made for a variety of snowblowers manufactured by Troy-Bilt, MTD, Craftsman, Huskee, and Yard Machines. It is an authentic OEM replacement part that is directly sourced from the manufacturer. This part is sold individually.
The variable speed belt goes around the engine pulley and the variable speed pulley. It is used on machines that have variable speed pulley drives and that need to be able to operate at different speeds. hese belts will wear down over time and need to be replaced. If the belt breaks, stretches too much or is worn down, replace it with a v-belt that fits properly. A screwdriver, pliers, socket set, and a wrench set will be needed to replace the belt. This is a genuine OEM part for lawn tractors, as well as other types of equipment with variable speeds, such as a snowblower, tiller, wood chipper, or log splitter. It is sold individually, and it will work on lawn tractors from many brands, including Ryobi, MTD, Craftsman, Yard Machines, Yard-Man, Turf King, and Mastercut.
A shear pin or shear bolt is specially made to provide auger connection to the shaft. When a foreign object comes in contact with the machine's moving part, the shear pin will break away. By doing so, the snowblower's auger system, as well as the gearbox, is safe from sustaining damage. This unique function of a shear pin means that it will need to be replaced sooner or later. To keep the shear pin in place, a retainer is inserted through. In some cases, when you hit a hard object, the retainer will bend and also need to be replaced. Replacement is easy. First, turn off the snowblower and let its engine cool down. Then, locate the bolts and remove them using a wrench. Insert the replacement. Make sure to align it properly. For replacement shear pins with retainers, you can get this genuine MTC replacement. It is compatible with snowblower models from MTD, Craftsman, Huskee, Yard-Man, Cub Cadet, Yard Machines, and Troy-Bilt snowblowers. These shear pins are original MTD-made products. Four shear pins with four retainers are included.