Parts for Craftsman 358350982: Oil Pump & Cap / Fuel Cap Parts

This is a replacement chainsaw fuel line kit that is compatible with a range of chainsaw models. Fuel lines are tubes used to feed fuel to the carburetor and to return unused fuel into the chainsaw's gas tank. If there is damage to the fuel line, it could present large problems including leaks. This will waste fuel and it can be dangerous. If there are issues with the fuel line, replace it right away.The plastic tubes can start to wear down over time. They might crack and break, or they may no longer have tight connections. Make sure that the chainsaw engine is cool before starting any repairs.The replacement chainsaw fuel line kit will work as a replacement for select models of chainsaws from Husqvarna and Craftsman. The kit is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a genuine fuel pickup assembly that is an integral part of many models of chainsaws from major manufacturers. This component is part of the fuel system and ensures the gasoline makes it from the fuel tank to the chainsaw's carburetor. When the primer bulb is pressed, it causes air to leave the carburetor so it can be filled with fuel. The extra fuel moves back into the tank using a return line. This part is made from quality materials but can wear out or become damaged, which will require it to be replaced.Basic tools like an Allen wrench and a screwdriver may be needed to replace the broken or damaged fuel pickup assembly. A pair of work gloves is also useful for the process. Make sure the chainsaw is powered off and placed on a level surface. Disconnect the spark plug wire to prevent the engine from powering on. Disassemble the tool to gain access to the fuel pickup assembly so it can be replaced with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. This fuel pickup assembly is sold individually. The part is designed to be compatible with chainsaws manufactured by Craftsman, Husqvarna, and Poulan.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This oil tube is a genuine Husqvarna part, sold individually. This oil tube can be used as a replacement part in a chainsaw. The purpose of an oil tube in a chainsaw is to measure the level of oil in the chainsaw to see if a replacement of oil will be necessary in the moment or at some point in the near future.The oil tube in a chainsaw might have to be replaced if the tube suffers damage that prevents it from accurately assessing and displaying the level of oil in the chainsaw. This could occur if the oil tube is punctured, dented, ripped, torn, scraped, warped, eroded, or otherwise damaged to the point of reduced efficacy or negated functionality. If this occurs, the oil tube should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil tube is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This replacement part is a bar plate and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This bar plate is typically found on chainsaws and acts as extra protection for the user. The bar plates main function is to strengthen where the bar mounts to the machinery, allowing for stronger grip and control.A new bar plate might be needed if the current one is damaged or broken in any way including being cracked or dented. It is possible that the bar plate might need to be replaced after years of normal wear and tear as the part comes in contact with debris such as rocks and stones. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Chainsaws may create a great deal of heat and friction, but the oil pump system prevents trouble. When using a chainsaw, it is necessary to use a specialty chainsaw bar oil. This is poured into a reservoir, and as the throttle is engaged, it cues a pump to distribute oil out of a port and on to the bar. From there the oil is distributed across the chain, which eliminates or greatly reduces friction and heat. The use of the oil pump is crucial, and this oil pump kit is a full replacement for times when a chainsaw is not getting adequate oil on the bar. This OEM replacement part includes the pump, housing, lines, and hardware necessary for installation. It works with a long list of brands, including Poulan. Craftsman, Husqvarna, and others. This project will require wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.