Parts for Ge SCA1000DBB03: 03 - Oven Cavity Parts

This halogen light bulb restores bright, reliable illumination inside your appliance, making it easier to check food and read controls. Replace a burned-out or broken lamp to bring back safe, convenient visibility while cooking.

• Provides bright lighting for the appliance cavity or work area
• Direct replacement for a failed, flickering, or shattered bulb
• Helps you monitor cooking progress without opening the door
• Typical symptoms: light won't turn on, intermittent flicker, blackened or broken glass

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Allow the light area and lens to cool completely
• Handle halogen bulbs with a clean cloth or gloves; avoid touching the glass
• Install per your appliance's instructions and ensure the bulb is fully seated and any cover is secured

This mount vent motor cover secures and protects the dryer vent motor assembly so the motor stays aligned and free from debris. It helps reduce abnormal noise and vibration while maintaining safe airflow through the vent housing. What it does:

• Secures the vent motor to the housing to keep the motor stable during operation
• Protects the motor from lint, dust, and foreign objects that can cause damage
• Helps reduce rattling, vibration, and noise caused by a loose motor mount
• Maintains proper airflow routing around the vent motor for efficient operation

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain or replace any mounting screws as needed
• Watch for sharp sheet-metal edges and wear gloves to protect your hands
• Verify motor alignment and secure fasteners snugly but avoid over-tightening

These grille clips secure the microwave's front vent grille to the cabinet, keeping the trim snug and aligned. Replacing worn or missing clips restores a tight fit and helps prevent gaps or rattling at the grille.

• Holds the top-front vent grille/trim firmly in place
• Replaces broken, bent, or missing clips
• Helps resolve a loose or sagging grille and rattling/vibration noises
• Direct replacement for the original grille-clip design

• Disconnect power to the microwave at the plug or breaker before servicing
• Open the door, remove the vent grille mounting screws (if present), and slide the grille out
• Press the new clips onto the grille tabs/slots, then reinstall the grille and screws
• Wear cut-resistant gloves; sheet-metal edges can be sharp.

Color: Black

Comes with two grease filters in a pack. Color: metallic. Each filter measures about 5 inches wide by 8 inches deep.

The Cooking Tray is an OEM part for GE microwaves. This tray sits on the turntable in the microwave and holds the food items being heated or cooked, allowing for even rotation and uniform cooking.

Causes of a bad cooking tray can include cracks or breaks from heavy use, exposure to extreme temperatures, or accidental drops.  

Symptoms of a bad cooking tray include:

• Cracks or chips on the tray
• Difficulty in rotating or the tray not rotating at all
• Unstable placement of food items
• Uneven cooking results

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This nonstick metal tray sits inside compatible microwave/convection models to support food during the correct cooking cycles. Replacing a warped, worn, or missing tray helps restore stable placement, even heating, and reliable browning.

• Provides a stable, heat-conductive surface for baking, roasting, or crisping as directed in your owner's manual
• Promotes even results and surface browning during convection or other approved cooking cycles
• Replace if the pan is warped or dented, or if the nonstick coating is scratched or flaking
• Common symptoms: poor browning, uneven cooking, tray rocks or won't sit properly, visible damage or peeling

• Allow the oven cavity and tray to cool completely before handling
• Position the tray on the turntable or rack exactly as specified in your model's owner's manual
• Use only on cycles your model approves for metal cookware
• Hand-wash with non-abrasive cleaners to preserve the nonstick surface

Shaft assembly that transfers rotational force from the motor to the appliance's rotating component, restoring smooth, aligned rotation and helping reduce noise and vibration caused by worn or damaged shaft parts. What it does:

• Transfers motor rotation to the appliance's rotating component (drum, basket or agitator depending on model)
• Restores proper alignment to reduce wobble and vibration during operation
• Helps stop grinding, scraping or loud knocking that can occur when a shaft is worn or damaged
• Works with existing bearings/bushings to maintain smooth rotation

• Always disconnect power at the breaker before removing panels or working on the appliance; if the appliance uses gas, shut off the gas supply as required.
• Follow the appliance service manual for disassembly order and correct shaft orientation during installation.
• Inspect related bearings, bushings, seals and fasteners; replace any worn components to prevent premature failure.

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.