Parts for Ge SCB2000FBB03: 03 - Oven Cavity Parts

This left-side access cover protects the appliance's internal components by keeping wiring, motors and controls enclosed and shielded from debris. It restores a finished appearance and helps prevent dirt or moisture from entering service areas. What it does:

• Shields wiring and control components on the left side from dust, food debris and moisture.
• Helps maintain proper airflow and component clearance behind the outer panel.
• Reduces the chance of accidental contact with wiring or moving parts during normal use.
• Common signs you need this cover: cracked, broken or missing left access cover, or visible debris in the service cavity.

• Always disconnect power to the appliance before beginning work.
• Typically secures with factory screws or clips; keep fasteners and mounting orientation the same as original.
• Inspect mounting tabs and adjacent panels for damage; replace any broken hardware for a secure fit.

This door switch access cover replaces the plastic access panel that protects and secures the door latch/switch assembly behind the appliance door. It restores a finished appearance and helps keep the switch area safe and stable. What it does:

• Covers and secures the door switch area to prevent debris contact and accidental interference
• Helps maintain proper alignment of the door switch and latch components
• Stops light drafts and reduces rattles around the door switch opening
• Common symptom: cracked, broken, or missing cover causing loose switch or exposed switch components

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the door inner panel or trim as needed to access the switch area; retain fasteners for reassembly
• Align cover over the switch opening and secure with the original screws/clips; do not overtighten
• If any switch or latch parts are damaged, inspect and replace those components separately

This is the right-side trim piece that finishes the outer edge of the appliance door, restoring a clean, factory appearance and covering the door seam and fasteners for a polished look. What it does

• Replaces cracked, chipped, or damaged right-side door trim for improved appearance
• Covers exposed screw heads and the door seam for a finished look
• Helps maintain proper door edge alignment and prevents snagging on clothing or items
• Matches OEM fit and finish for a consistent appearance with the existing door

• Basic hand tools (screwdriver) are typically required; keep all removed fasteners for reinstallation
• Handle carefully to avoid scratching the new trim during installation
• Disconnect power or follow manufacturer safety instructions when working near electrical components

This turntable motor drives the glass tray in your microwave for even heating. Replace it when the tray stops turning, turns intermittently, or the motor makes unusual noises to restore smooth, reliable rotation.

• Rotates the turntable tray/plate for more even cooking and reheating
• Provides steady drive to the tray via the center coupler
• Typical fix for a non-spinning or intermittently spinning turntable
• Can address loud humming or grinding noises from beneath the oven floor

• Disconnect power before servicing; microwaves contain high-voltage components
• Access is typically from the bottom by removing the motor cover or base panel
• Note wire orientation; transfer connectors, align the shaft with the coupler, and secure with the original screws
• After reassembly, place a microwave-safe cup of water on the tray and run briefly to ensure the turntable rotates

This nonstick metal tray sits inside compatible microwave/convection models to support food during the correct cooking cycles. Replacing a warped, worn, or missing tray helps restore stable placement, even heating, and reliable browning.

• Provides a stable, heat-conductive surface for baking, roasting, or crisping as directed in your owner's manual
• Promotes even results and surface browning during convection or other approved cooking cycles
• Replace if the pan is warped or dented, or if the nonstick coating is scratched or flaking
• Common symptoms: poor browning, uneven cooking, tray rocks or won't sit properly, visible damage or peeling

• Allow the oven cavity and tray to cool completely before handling
• Position the tray on the turntable or rack exactly as specified in your model's owner's manual
• Use only on cycles your model approves for metal cookware
• Hand-wash with non-abrasive cleaners to preserve the nonstick surface

This nonstick tray-grille pan is the oven broiler pan used to catch drippings and hold food for broiling, grilling and roasting. The durable nonstick finish helps reduce sticking and makes cleanup easier. What it does:

• Holds food during broiling and grilling to promote even exposure to heat
• Catches grease and drippings to help reduce smoke and oven mess
• Designed to work with the oven's broiler system for high-heat cooking tasks
• Nonstick surface helps prevent food from adhering and simplifies cleanup

• One nonstick tray-grille pan

• Make sure the oven is completely cool and power is off before handling or installing parts
• Slide the pan onto the broiler support or oven rack in the same orientation as the original part
• Use oven mitts or gloves when removing the pan after cooking; let it cool before cleaning
• Clean with a soft sponge and mild detergent to preserve the nonstick finish; avoid abrasive pads

The Microwave Oven Light Lens Cover is an OEM replacement part for GE microwaves. It serves as the protective glass shielding the internal light fixture. Reliable lens safety and clarity are pivotal to effortless visibility within microwave cavities.

Causes of a damaged light lens cover can include cracks or breaks from impact accidents during cleaning, warping from excessive heat exposure over time, or scratches obscuring transparency.

Symptoms of a compromised lens cover include:

• Cloudiness or opacity inhibiting light diffusion
• Exposure of live electrical wiring beneath broken glass
• Gaps permitting liquid/debris ingress into delicate internals
• Inability to accurately monitor microwaved items cooking

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.