Parts for Ge ZGP366LR2SS: 05 - Oven Cavity Parts

The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.

Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.

Symptoms of a bad or missing igniter mounting screw include:

• The igniter becoming loose or misaligned

• Difficulty securing the igniter during installation or repair
• The burner fails to ignite reliably or consistently
• Increased noise or movement of the igniter during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This igniter cover is a replacement protective shield that helps protect the oven igniter from food spills and debris, extending the igniter's service life and helping the burner ignite reliably. What it does:

• Shields the oven igniter from direct contact with spills, drips and falling debris
• Helps prevent premature igniter damage that can lead to ignition problems
• Can reduce the chance of shorting or erratic ignition caused by contamination
• Matches original shape to ensure proper fit and clearance around the igniter

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Allow the oven to cool completely and wear gloves to avoid cuts from sheet metal
• Handle the igniter and cover carefully; avoid touching the igniter surface directly
• Test appliance operation after reinstall

This oven igniter lights the gas for the oven burner so your range can preheat and maintain temperature. Replacing a weak or failed igniter restores reliable ignition and consistent oven heating performance.

• Heats to draw open the gas safety valve and ignite the oven burner
• Helps fix: oven not heating or failing to reach temperature
• Igniter glows but burner won't light, or takes a long time to light
• Intermittent oven heat or frequent preheat failures

• Disconnect power and shut off gas before servicing
• Handle the ceramic igniter carefully; avoid touching or stressing the heating element
• Transfer any required mounting hardware from the original and route wires away from hot surfaces
• After installation, restore power and gas and verify the burner lights and the flame is steady

A complete oven rack and guide kit that restores proper rack support and smooth sliding in compatible 48" and 36" ovens. Replaces worn, bent or broken racks and roller/guide assemblies to improve rack stability and function. What it does:

• Provides a full replacement rack plus guide hardware to support cookware and prevent sagging
• Restores smooth, even rack movement when sliding food in and out of the oven
• Replaces bent, warped or damaged rack or guide components that cause sticking or uneven travel
• Helps maintain correct oven clearance and safe placement of cookware while cooking

• Always disconnect power to the oven and allow it to cool before installing parts
• Installation uses basic hand tools; keep fasteners and hardware in a safe place during replacement
• Inspect oven cavity and mounting points for damage and replace any additional worn hardware as needed
• Follow the appliance manufacturer's instructions for correct placement and testing after installation

This replacement burner griddle fits over a cooktop burner to provide a flat, heated surface for cooking foods like pancakes, eggs and sandwiches. It restores a level cooking surface when the original griddle is damaged or worn. What it does:

• Provides a flat, even surface for griddling and frying on the cooktop
• Improves heat contact for foods that need a broad, stable cooking area
• Replaces cracked, warped or heavily scratched griddles that interfere with cooking
• Helps prevent direct flame contact with small or delicate foods

• Ensure the range is completely cool and power/gas is turned off before handling.
• Lift old griddle straight up; align new griddle so it seats properly over burner supports.
• Do not force or bend the griddle; avoid using on damaged burners or supports.
• Clean with non-abrasive cleaners; follow appliance manufacturer cleaning guidance.

Restore bright, clear visibility inside your oven with this 20-watt halogen light bulb. Replace a burned-out bulb to monitor cooking through the window and safely see racks and dishes without opening the door. What it does:

• Illuminates the oven cavity when the light switch is used or the door is opened
• Helps you check cooking progress and locate items inside the oven
• Common symptoms: interior light won't turn on, is dim or flickers, or the bulb glass is broken
• 20-watt halogen design matches the original lighting specification

• 1 halogen light bulb

• Disconnect power at the breaker and allow the oven to cool completely
• Wear gloves or use a clean cloth; avoid touching the glass envelope
• Remove the lens/cover per your model instructions; carefully remove the old bulb and fully seat the new bulb
• Reinstall the cover, restore power, and test; use only the wattage/type specified for your appliance

This clip retainer secures the oven door glass to the door frame to keep the glass stable during use and prevent rattling or separation. Simple replacement restores proper glass alignment and reduces vibration noise. What it does:

• Holds the inner door glass in position inside the oven door assembly.
• Prevents the glass from shifting, rattling, or contacting other door parts.
• Helps maintain a safe, stable door assembly after a cracked or missing clip.
• Commonly replaced when the glass feels loose or the door vibrates during operation.

• One clip retainer for door glass.

• Disconnect power to the appliance before starting and allow the door to cool completely.
• Remove the oven door per the manufacturer instructions and handle glass with care — support both pieces of glass when separating.
• Use basic hand tools; keep track of screws and any spacers removed.

The Igniter Glowbar is an OEM part for GE ovens. This component is essential for igniting the gas in the oven burner, producing the heat required for cooking and baking. The glowbar heats up to a high temperature, igniting the gas and ensuring efficient and reliable oven operation.

Causes of a bad igniter glowbar can include wear and tear from regular use, electrical faults, or damage from high temperatures over time. A worn or damaged igniter may fail to reach the necessary temperature to ignite the gas.

Symptoms of a bad igniter glowbar include:

• The oven not heating up
• Delayed ignition or the oven taking longer to preheat
• A weak or no glow from the igniter
• The smell of gas without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement crystal lamp provides the interior lighting for refrigerators, improving visibility so food and shelves are easier to see. Designed as a direct-fit replacement to restore a clear interior light. What it does:

• Illuminates the refrigerator interior to help you find items more easily.
• Replaces a cracked, broken, dim, or missing lamp assembly.
• Fits into the existing lamp housing and works with the original socket.

• Disconnect power to the appliance before starting any work to avoid electrical shock.
• Handle the lamp carefully—wear gloves or use a cloth to avoid cuts from glass.
• Remove old lamp assembly per the owner's manual; align and seat the new lamp securely in the housing.

Probe thermistor (temperature sensor) gives the refrigerator control board accurate internal temperature readings so it can regulate compressor and defrost cycles. Replacing a bad thermistor helps restore steady cooling and correct temperatures. What it does:

• Senses interior temperature and sends the signal to the control board so cooling and defrost cycles operate correctly.
• Fails can cause uneven temperatures, items being too warm or too cold, or intermittent cooling.
• Often used in fresh food and freezer compartments as part of temperature control and defrost systems.
• Electrical symptoms may include inconsistent cycling or the fridge running more than expected.

• Disconnect power before servicing to avoid electrical shock.
• Handle the sensor tip and wiring gently; avoid kinking or crushing the probe or leads.
• Basic hand tools are usually required; check the appliance service manual for access and routing.
• After installation, restore power and confirm correct operation.