Parts for Dacor ER30GISCHNG: Oven Parts

This replacement oven rack restores cooking surface support for convection ovens and lets cookware sit securely for even baking. Designed to match the original oven shelving for proper fit and airflow. What it does:

• Provides a stable shelf for pans, bakeware, and racks inside the oven cavity
• Positions food for improved convection airflow and more even cooking
• Replaces bent, damaged, or missing racks that interfere with sliding or heat distribution

• Install by sliding the rack into the oven's side supports until fully seated; no tools typically required
• Allow the oven to cool and disconnect power before handling or installing to avoid burns or electric shock
• Inspect side supports and rack guides for damage; replace worn guides if the rack does not seat securely
• Clean rack with warm soapy water or a non-abrasive cleaner before first use if needed

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This service receptacle hinge is the hinge assembly used to support and secure the appliance's service receptacle/panel, restoring a stable, properly aligned access panel. It replaces a worn or damaged hinge to help the panel open and close smoothly. What it does

• Provides pivot and support for the service receptacle or service access panel
• Keeps the panel aligned and securely attached to the appliance frame
• Prevents the panel from sagging, jamming, or falling when opened
• Common symptom: loose, wobbly, or detached service panel or difficult-to-open access

• One service receptacle hinge

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Typical install requires basic hand tools; support the panel while removing and installing the hinge
• Inspect mounting screws and nearby components for wear and replace if damaged

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

The Oven Igniter is an OEM part for Samsung ranges. It is responsible for igniting the gas to create a flame that heats the oven cavity for cooking.

A bad oven igniter can be caused by wear and tear over time, electrical issues, or damage. When the igniter malfunctions, it can result in a range of problems, such as the oven not reaching the desired temperature, uneven heating, or the inability to ignite the gas.

Symptoms of a bad oven igniter include:

• Oven not reaching the desired temperature
• Uneven heating of food
• Gas smell without ignition
• Igniter glowing but no flame

Replace your faulty oven igniter with this genuine OEM part to restore your range oven. This Samsung part can also be used on Kenmore/Sears appliances.

This service replacement cell gasket seals a refrigerator compartment door to help maintain proper cooling and reduce moisture buildup. It restores a tight seal to keep cold air in and warm air out. What it does

• Replaces a worn or damaged cell/compartment door gasket to restore an airtight seal
• Helps prevent frost or ice buildup inside the compartment
• Reduces temperature fluctuations that can affect food storage
• Can stop leaks of cold air that lead to longer run times or higher energy use

• One replacement gasket

• Disconnect power to the appliance before starting any repair
• Inspect the door and mounting channel for debris or damage; clean before installing the new gasket
• Replace using OEM instructions or service manual to ensure correct fit and sealing; heating or adhesive steps may be required depending on model

This straight bake burner replaces the oven's lower gas burner to restore consistent bake heat and flame. It installs in the oven floor and connects to the regulator and igniter assembly for normal gas flow to the bake chamber. What it does:

• Provides the primary gas flame for the oven's bake function
• Restores even baking when the oven fails to reach or hold set temperatures
• Replaces corroded, warped, or damaged burner tubes that produce weak or irregular flames
• Helps eliminate yellow or sputtering flames caused by burner damage or blockage

• One straight bake burner assembly

• Shut off power and gas supply before beginning service; follow all local codes
• Basic hand tools are typically required; gentle handling prevents deformation of the burner tube

The Space Heater Heat Deflector is an essential component for maintaining the efficiency of your Samsung space heater. This genuine OEM part is specifically designed to direct warm air evenly, enhancing the overall heating performance of your appliance. By ensuring optimal airflow, the heat deflector helps to create a more comfortable environment while reducing energy consumption. Made to fit a variety of Samsung space heater models, this deflector guarantees a perfect and secure fit, making installation straightforward and hassle-free. Replacing a damaged or worn heat deflector with this genuine OEM part not only restores your heaterGÇÖs functionality but also prolongs its lifespan. Additionally, the durable construction of the Space Heater Heat Deflector ensures long-lasting performance, providing reliable warmth for your space. Whether youGÇÖre repairing an existing heater or looking to maintain its peak performance, the Space Heater Heat Deflector is a trustworthy choice that delivers both quality and efficiency.

This bushing support stabilizes the dryer/tub rack assembly to reduce wear and keep the drum or rack turning smoothly. It restores proper alignment and helps stop rubbing, scraping, and unusual noises caused by worn support components. What it does:

• Centers and supports the rack/drum at the rear/front to maintain smooth rotation
• Reduces metal-on-metal contact that causes scraping, grinding, or squealing
• Helps prevent excessive wobble and uneven spinning that can lead to further damage
• Works with existing shafts, bushings, and support brackets to restore proper operation

• Disconnect power (and gas if applicable) before starting any repair
• Replacement typically requires removing the dryer cabinet or access panel; have basic hand tools ready
• Inspect mating bushings, shafts, and mounting hardware and replace any worn parts for a reliable repair

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

The Stainless Steel Weather-Resistant Service Screw #8x3/8 for Gas Walk-Behind Mower is an essential component for maintaining your mower's performance. Crafted from high-quality stainless steel, this service screw is designed to withstand harsh weather conditions, ensuring long-lasting durability. The #8x3/8 size provides a secure fit, keeping your mower's parts firmly in place during operation. Using a genuine OEM part guarantees compatibility with your Samsung gas walk-behind mower, ensuring optimal performance and reliability. The weather-resistant properties help prevent rust and corrosion, extending the lifespan of your mower. Whether you're performing routine maintenance or replacing a worn-out screw, the Stainless Steel Weather-Resistant Service Screw DE81-02200A offers a dependable solution. Enhance the functionality of your gas walk-behind mower with this durable, high-performance service screw, designed to meet the highest standards of quality and functionality.