Parts for Maytag MTUC7500ADE2: 06 - Panel And Control Parts

Color: Black. This panel is without cut out for lower switch. For panel with cut out use W10342596.

This retainer bracket secures internal components in place to restore proper alignment and support. It replaces a worn or broken bracket to help reduce rattling, misalignment, or loose parts during operation. What it does:

• Holds and supports internal assembly parts to maintain correct positioning
• Prevents movement that can cause noise, vibration, or rubbing
• Restores stability after bracket damage or wear
• Works as a direct-fit replacement when the original bracket is broken or bent

• High-level replacement — basic hand tools required;
• Disconnect power (and gas if applicable) before beginning any repair
• Inspect surrounding parts and hardware; replace any damaged fasteners for a secure fit

This replacement insert restores the factory interior trim and fit for affected Whirlpool appliances, improving appearance and helping parts align correctly. It's a direct-fit component that replaces damaged, warped, or missing inserts. What it does

• Replaces a worn, cracked, or missing interior trim insert that can affect fit and finish
• Helps maintain correct alignment of adjacent panels and components
• Prevents gaps that can cause rattling or allow debris to collect
• Restores OEM appearance for a clean, finished look

• One replacement insert

• Disconnect power to the appliance before beginning any repair
• Remove any clips or screws holding the old insert; keep track of fasteners for reinstallation
• Handle edges and surrounding panels carefully to avoid scratching or damage

This insert is a single replacement panel insert that restores the appliance's finished appearance and helps secure adjacent trim or controls. It's a direct-fit part used when the original insert is cracked, loose, or missing. What it does

• Replaces damaged or missing panel trim to restore a clean, finished look
• Helps hold surrounding trim pieces and controls in proper alignment
• Stops rubbing or rattling caused by a broken insert
• Prevents debris from entering gaps behind the control or trim area

• One insert

• Disconnect power (unplug or shut off circuit) before starting any work
• Installation typically requires removing the outer trim or control panel to access mounting points
• Handle trim pieces carefully to avoid cracking; use appropriate screwdrivers or trim tools

Size: 8 x 1/2 ab.

This black control escutcheon is the front trim for your appliance's control area, restoring a finished appearance and protecting the control board and buttons from spills and wear. It's a direct-fit replacement that keeps the control area looking and functioning as intended. What it does

• Replaces damaged, cracked, or scratched control panel trim to improve appearance
• Shields control buttons and electronic components from light splashes and debris
• Restores proper alignment and spacing for control knobs/buttons
• Helps prevent contaminants from reaching internal control components

• One black control escutcheon

• Disconnect power to the appliance before starting any repair to avoid shock
• Remove any knobs, trim pieces, or screws securing the existing escutcheon; keep fasteners for reassembly if not supplied
• Handle trim carefully to avoid scratching the new finish; align tabs and screw holes before fastening

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

The On/Off Rotary Switch Kit is an OEM part for Whirlpool trash compactors. This kit includes the rotary switch and necessary components to control the power and operation of the trash compactor, allowing users to turn the unit on and off easily.

Causes of a bad rotary switch can include electrical wear and tear, damage from repeated use, or issues with the internal contacts. Over time, these factors can lead to the switch becoming unresponsive or failing to control the compactor properly.

Symptoms of a bad rotary switch include:

• The trash compactor not turning on or off
• Intermittent operation of the compactor
• The switch feeling loose or unresponsive
• Electrical sparking or unusual noises from the switch area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This switch nut secures a rotary control or switch to the appliance's front panel. Replacing a stripped or missing nut keeps the control stable so the knob turns smoothly and the shaft stays properly aligned.

• Clamps the switch/control to the panel to prevent movement or rotation
• Helps maintain correct knob alignment with dial markings
• Common symptoms: loose or wobbly knob, switch rotates in the panel, missing/damaged nut
• Often needed after service if the original nut is stripped or lost

• Disconnect electrical power before servicing
• Remove the knob and any decorative escutcheon; thread the new nut onto the switch bushing from the front of the panel
• Support the switch from behind while tightening; do not overtighten to avoid panel or switch damage
• Restore power and test control operation

Color: Black

Size: 10-24 x 3/8 inch.

Replace a broken or missing air freshener cover. This black cover shields and secures the charcoal deodorizer cartridge, helping it stay in place so odors are contained and the compartment maintains a clean, finished look. What it does:

• Covers and protects the deodorizer/charcoal air freshener compartment
• Holds the odor-absorbing cartridge securely in place
• Helps contain odors by ensuring the cartridge is seated correctly
• Common symptoms: cracked, warped, loose, rattling, or missing cover

• 1 black air freshener/filter cover

• Disconnect power before servicing
• Open the access area for the deodorizer/filter
• Remove the old cover; position and secure the new cover per the design (snap or fastener)
• The deodorizer/filter is properly seated and the cover is fully engaged

Color: black. It measures about 4-1/2 inches wide by 4-1/2 inches high.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal