Bosch Range HDS7052C Parts
Genuine Bosch part
By: Bosch
Part Number: 00422089
The Sensor is an OEM part for Bosch ovens and ranges. It detects and monitors the actual interior temperature to maintain precise baking and roasting conditions.
Causes of a bad temperature sensor can include wear from prolonged heat exposure within the oven cavity. Physical damage, moisture intrusion or circuitry malfunctions may also lead to sensor failure over time.
Symptoms of a bad oven temperature sensor include:
- Inability to accurately read or achieve set target temperatures
- Fluctuations in readings displayed
- Cooking modes like bake and broil functioning abnormally
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Error code appeared during oven preheat indicating overheating & causing it to shut down Paul T. • Chesapeake , VA • June 30, 2019
(1) Unplugged oven. (2) Removed rear panel & unplugged temperature sensor. (3) From inside oven, removed 2 screws holding sensor & pulled sensor out. (4) Installed new sensor by performing steps 1 thru 3 in reverse order.
Read more
More
$64.72
- Compare At:
-
$77.02
- You Save:
-
$12.30
Genuine Bosch part
By: Bosch
Part Number: 00603506
Fix burners that won't light or spark continuously. This igniter electrode restores reliable gas ignition. DIY-friendly repair in about 15 minutes.
Do-It-Yourself Stories from Customers like You
Bad electrode ignitor on one top burner of bosch gas stove James H. • Fayetteville , AR • April 14, 2015
Ordered part at 4:33 on Friday and FedEx dropped it at my door at 9:35 Sat a.m. I did not pay for expedited shipping.
I had trouble getting to the offending part as the illustration of the parts was less than desirable. i called the help line and the agent was very helpful with ideas to try as he was looking at the same illustration as I. I did finally figure out the correct way to access the part and once I removed the rusted screws, the repair took only 5 minutes even though I spun my...
Read more
More
$27.53
- Compare At:
-
$33.04
- You Save:
-
$5.51
Genuine Bosch part
By: Bosch
Part Number: 00491569
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Oven door gaskets had deteriorated Linda L A. • San Bernardino , CA • November 18, 2016
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!!
Read more
More
$91.66
- Compare At:
-
$109.08
- You Save:
-
$17.42
Genuine Bosch part
By: Bosch
Part Number: 00637940
Replacement rubber feet for gas cooktop grates. Kit includes 4 feet and adhesive. Needed when original feet are cracked, worn, missing, or fell off.
Do-It-Yourself Stories from Customers like You
Original rubber foot fell off and was lost Walter M. • Cuthbert , GA • July 17, 2019
ORDERED NEW ONES FROM YOU
Read more
More
$50.79
- Compare At:
-
$60.44
- You Save:
-
$9.65
Genuine Bosch part
By: Bosch
Part Number: 00423896
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
- Secures the toe-kick or lower access panel to the base/frame
- Restores proper fit when the original screw is lost or damaged
- Helps reduce panel rattles and vibration
- Maintains correct alignment and clearance at the bottom edge
What's included: One M4 x 8 screw Install notes:
- Disconnect power before servicing; also shut off the water supply
- Support the panel and align holes before threading the screw
- Start by hand to avoid cross-threading; tighten snugly—do not overtighten
- Verify size matches the original; replace matching hardware together if required by your model
Do-It-Yourself Stories from Customers like You
I fell backwards & dishwasher door was open i won the battle! i have the bruises & bent hinges to prove it Kathleen O. • West Chester , PA • July 22, 2017
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros.
Read more
More
$12.16
- Compare At:
-
$13.38
- You Save:
-
$1.22
Genuine Bosch part
By: Bosch
Part Number: 00423485
Fix weak or uneven burner flames with a new orifice holder assembly. Secures gas flow orifices for proper flame control. DIY-friendly, under 30 minutes.
Do-It-Yourself Stories from Customers like You
The machine screws that secured the holders on my gas range had become hopelessly rusted to the point I had to drill off the heads to remove the burners; all holders had to be replaced Loring C. • Melbourne , FL • February 19, 2019
After getting the screw heads off, I was able to remove the burners, then gently push the holders down until the tops of the machine screws cleared the drip pan. Looking online, it looked like I'd have to do major surgery to get the top off (i.e., the directions I found required me to remove both panels from the back of the range, along with the securing screws for the control knob panel and four securing screws that held down the front of the drop pan. Turns out the job only requires removing...
Read more
More
$60.59
- Compare At:
-
$72.71
- You Save:
-
$12.12
Genuine Bosch part
By: Bosch
Part Number: 00423486
Mounting holder that secures burner assemblies to the cooktop. Replace if cracked, rusted, or missing to restore proper burner positioning and stability.
Do-It-Yourself Stories from Customers like You
The machine screws that secured the holders on my gas range had become hopelessly rusted to the point I had to drill off the heads to remove the burners; all holders had to be replaced Loring C. • Melbourne , FL • February 19, 2019
After getting the screw heads off, I was able to remove the burners, then gently push the holders down until the tops of the machine screws cleared the drip pan. Looking online, it looked like I'd have to do major surgery to get the top off (i.e., the directions I found required me to remove both panels from the back of the range, along with the securing screws for the control knob panel and four securing screws that held down the front of the drop pan. Turns out the job only requires removing...
Read more
More
$59.55
- Compare At:
-
$70.86
- You Save:
-
$11.31
Genuine Bosch part
By: Bosch
Part Number: 00436364
This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.
A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging.
Symptoms of a defective Terminal Box may include:
- Inconsistent power supply to the oven
- Non-functional heating elements
- Sparks or electrical arcing within the terminal box area
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Terminal block cracked Lester B. • Orlando , FL • December 20, 2024
Removed and replace
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Bosch part
By: Bosch
Part Number: 00423487
Mounting clip that secures burners to your gas range cooktop. Replace if rusted, broken, or missing to properly position burners and prevent rattling.
Do-It-Yourself Stories from Customers like You
The machine screws that secured the holders on my gas range had become hopelessly rusted to the point I had to drill off the heads to remove the burners; all holders had to be replaced Loring C. • Melbourne , FL • February 19, 2019
After getting the screw heads off, I was able to remove the burners, then gently push the holders down until the tops of the machine screws cleared the drip pan. Looking online, it looked like I'd have to do major surgery to get the top off (i.e., the directions I found required me to remove both panels from the back of the range, along with the securing screws for the control knob panel and four securing screws that held down the front of the drop pan. Turns out the job only requires removing...
Read more
More
$57.39
- Compare At:
-
$67.72
- You Save:
-
$10.33
Genuine Bosch part
By: Bosch
Part Number: 00436632
This heating element is the direct-replacement heater assembly that provides the heat source for compatible appliances, restoring proper heating so cycles reach the temperatures needed for effective drying or cleaning. What it does:
- Generates heat for the appliance's thermal system (air or water heating depending on model).
- Replaces a failed or damaged heater element to restore normal temperature rise.
- Common symptoms it may fix: no heat, weak/no drying or cleaning performance, or unusually long cycles.
- Works as part of the appliance's safety and temperature-control circuit (thermostats or sensors may also be involved).
What's included: Heating element Install notes:
- Always disconnect power (and water, if applicable) before replacing the element.
- Allow the appliance to cool fully and wear protective gloves; heating elements can have sharp edges.
- After installation, restore power and run a short test cycle to check for any error codes.
Do-It-Yourself Stories from Customers like You
Electric oven in our bosch stove would not heat properly Kevin K. • Willow Street , PA • May 23, 2017
Diagnosed the system using schematic on back of oven. With power ON (BE VERY CAREFUL - VERY DANGEROUS). Relay board was working - was providing 220VAC to Main Bake Element and Convection Element - even during pre-heat. Temp would not to past 400 - and temp would drop when oven door was opened. With Power OFF - disconnected one of the power leads to the bake element to properly measure its resistance - approx.. 20-25 ohms DC resistance - Element OK. Replace lead to Bake Element. ...
Read more
More
$180.95
- Compare At:
-
$215.33
- You Save:
-
$34.38
Genuine Bosch part
By: Bosch
Part Number: 00429065
Leveling foot for electric and gas ranges. Adjustable metal foot installs at base corner. Replace if cracked, broken, or missing to level your range.
More
$30.57
- Compare At:
-
$36.38
- You Save:
-
$5.81
Genuine Bosch part
By: Bosch
Part Number: 00415045
Restore oven visibility with this complete light assembly. Replace when bulb won't light, lens is cracked, or socket is damaged. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Oven lite fixture blew Beverly C. • Vanderbilt , MI • January 21, 2017
We ordered a new one from Appliance Parts Pros.com and it came within a few days. My husband had no problem with installation of it.
Thank you for your promptness with this item.
A Sincere Thank You,
Bev and Dick
Read more
More
$86.52
- Compare At:
-
$102.96
- You Save:
-
$16.44
Genuine Bosch part
By: Bosch
Part Number: 00416438
Replacement foot assembly for gas cooktop or range grates. Installs on the underside to cushion contact and stabilize the grate. Replace when worn, missing, or broken.
Do-It-Yourself Stories from Customers like You
Rubber feet came off the top grate covers Ted M. • Granite Bay , CA • October 01, 2017
Used JB Weld epoxy to hold in new feet
Read more
More
$7.69
- Compare At:
-
$9.15
- You Save:
-
$1.46
Genuine Bosch part
By: Bosch
Part Number: 00423446
Fix a loose or misaligned cooktop burner with this burner housing. Secures the burner head and igniter for stable flames and even heating on your range.
More
$51.68
- Compare At:
-
$62.02
- You Save:
-
$10.34
Genuine Bosch part
By: Bosch
Part Number: 00492444
Fixes burner flame issues on gas ranges. Controls gas flow for consistent cooking temperatures. Replacing a worn valve restores precise flame control.
More
$48.34
- Compare At:
-
$57.52
- You Save:
-
$9.18
Genuine Bosch part
By: Bosch
Part Number: 00423442
This is the burner base housing for a gas range cooktop surface burner. It sits beneath the burner cap and distributes gas evenly to produce a consistent flame ring. Replace this part if you notice uneven flames, yellow or irregular burning, or if the base is cracked or corroded from spills and buildup.
More
$35.27
- Compare At:
-
$35.90
- You Save:
-
$0.63