Kenmore Refrigerator 106.58582890 (10658582890, 106 58582890) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188656
The Crisper Pan is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables at optimal humidity levels, helping to keep them fresh for longer periods. This drawer fits into the lower section of the refrigerator and is made from durable, clear plastic, allowing for easy visibility of its contents.
Over time, the pan can crack or break due to frequent use, overloading, or accidental impacts.
Symptoms of a bad Crisper Pan include:
- Cracks or breaks in the pan
- Difficulty sliding the pan in and out
- Reduced storage capacity
- Produce not staying fresh
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Touchpad does not respond
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Replace Whirlpool Crisper Pan Charles B. • Leitchfield , KY • March 25, 2014
Located the Whirlpool crisper pan on AppliancePartsPros.com on Monday morning and received the crisper pan on Tuesday afternoon. Doesn't get any better than than!! I will be repeat business in the future!!
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10321304
The Door Shelf Bin is an OEM replacement part for Whirlpool refrigerators, designed to provide storage capacity and organization within the fridge. This bin attaches to the inside of the refrigerator door, offering a convenient place to store jars, bottles, and other condiments.
Symptoms of a bad Door Shelf Bin include:
- Cracks or breaks in the bin
- The bin detaching from the door
- Difficulty in sliding the bin in or out
- Noticeable sagging when loaded
Causes of these issues often stem from overloading the bin with too much weight, accidental damage from items being pushed in too forcefully, or simply the natural wear and tear that occurs over time.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Needed extra door shelf bins for dry ingredients. ordered wrong size thru ebay. Kay S. • Aiea , HI • March 12, 2014
While looking for parts thru AppliancePartsPros.com, I found a diagram with my refrig model #
for the door shelf bin. It was a perfect match. Prior to that I've spent countless hours searching
and became very frustrated. The diagrams and videos were very helpful.
Thank you,
KShigeta
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W10408179
The Water Inlet Valve is an OEM replacement part for Whirlpool refrigerators. It regulates the supply of water to the ice maker and water dispenser features. Properly functioning valves are essential for reliably producing ice and dispensing filtered water.
Symptoms of a faulty inlet valve include:
- Ice maker or dispenser not working properly
- Water leaking or spraying from the supply line connections
- Irregular water pressure when dispensing
Causes can involve mineral buildup overtime inhibiting flow control or a motor malfunctioning to switch the valve on and off.
This replacement valve is also compatible with brands like Maytag, KitchenAid, and Jenn-Air.
Note: If your original valve assembly had an additional connector bracket, the factory no longer includes that with the valve. The connector bracket can be ordered separately by ordering part# WPW10445062.
Do-It-Yourself Stories from Customers like You
No ice from a Kenmore (Whirlpool) side by side refrigerator Eric R. • Studio City , CA • June 18, 2020
Our Kenmore (Whirlpool) refrigerator's ice maker had stopped making ice. I searched YouTube and found a repair videos for this exact problem, finding one with a similar refrigerator and the identical ice maker. I learned that the Water Inlet Valve had likely gone bad and would need to be replaced. In the video the tech pointed out the small rubber tube inside the freezer that comes down from the ceiling of the refrigerator into the ice maker. This tube feeds it the water to make ice with and...
Read more
More
$76.68
- Compare At:
-
$90.48
- You Save:
-
$13.80
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317943
The Icemaker Kit is an OEM replacement part for Whirlpool refrigerators. It is a comprehensive kit that includes all the necessary components to replace or install a new icemaker in your refrigerator.
Causes of needing a new icemaker kit can include the existing icemaker malfunctioning, producing insufficient or irregular ice, or being damaged due to wear and tear.
Symptoms indicating it's time to replace the icemaker include:
- No ice production or irregular ice cube formation
- Water leaks or excessive condensation around the icemaker area
- Strange noises or grinding sounds during operation
- Error codes or warning lights related to the icemaker
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. Note: This kit no longer comes with the "shut-off" arms. Order by model if needed.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker dispenses too much ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken icemaker Phillip L. • Raymond , MS • March 30, 2024
Replace assembly
Read more
More
$117.95
- Compare At:
-
$141.54
- You Save:
-
$23.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188664
The Meat Pan is an OEM part for Whirlpool refrigerators. This component provides a dedicated storage area within the refrigerator, designed to keep meats at an optimal temperature for freshness. The meat pan slides in and out for easy access and helps to organize and separate meat products from other items in the fridge. The pan measures approximately 14.96" long x 16.456" wide by 7.598" high
Common causes of a bad meat pan include damage from impact, wear and tear from frequent use, or warping due to temperature changes.
Symptoms of a bad meat pan include:
- Cracks or breaks in the pan
- Difficulty sliding the pan in and out
- The pan not fitting securely in its designated space
- Food not being kept at the correct temperature
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken drawer Vern W. • Manhattan , KS • August 14, 2014
Installed replacement drawer
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10225581
The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It is responsible for monitoring the temperature of the evaporator coils. When the coils reach a certain temperature, the thermostat signals the defrost heater to turn on and melt any ice or frost buildup. This ensures proper airflow and prevents excessive ice formation.
Causes of a bad defrost thermostat can be attributed to normal wear and tear over time or electrical malfunctions.
Symptoms of a bad defrost thermostat include:
- Excessive ice buildup in the freezer section.
- Inadequate cooling in the refrigerator compartment.
- Frost or ice accumulating on the evaporator coils.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Frost buildup
-
Freezer not defrosting
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct Christopher M. • Yorba Linda , CA • December 15, 2014
Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils.
You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included).
Service tech wanted over $400 to repair, fixed it myself for half that. Thanks !
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198202
The Cold Control is an OEM part for Whirlpool refrigerators, acting as a thermostat that regulates the temperature inside the fridge and freezer compartments. It's a critical component that ensures your refrigerator maintains the desired temperature to keep your food fresh and safe.
Causes of a bad Cold Control may include electrical malfunctions within the control unit, which can prevent accurate temperature sensing. Wear and tear from continuous use may lead to a degradation of the control's responsiveness.
Symptoms of a bad Cold Control include:
- The refrigerator or freezer is too warm or too cold
- Frequent or continuous running of the refrigerator's compressor
- Inability to start the cooling system
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge runs too long
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
The whirlpool side by side needed upgrade of control components William M. • Sunnyside , WA • February 06, 2017
The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a...
Read more
More
$62.50
- Compare At:
-
$83.40
- You Save:
-
$20.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180226
The Control Bracket is an OEM part for Whirlpool refrigerators. It serves as a foundational component within the refrigerator's control panel, securing and supporting various controls and electrical components.
Causes of a bad Control Bracket can include physical damage from impact or excessive force, corrosion due to moisture or chemical exposure, and general wear and tear over time. A compromised control bracket can lead to misalignment of control components, difficulty in setting controls, or even failure of the refrigerator to respond to control inputs properly.
Symptoms of a bad Control Bracket include:
- Loose or unresponsive controls
- Difficulty adjusting refrigerator settings
- Visible damage or warping of the bracket
- The refrigerator not maintaining set temperatures correctly
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Water dispenser stopped working. Mark S. • Eliot , ME • January 13, 2021
I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10329686
The Door Cam is an OEM part for Whirlpool refrigerators. It functions as a critical component in the door closing mechanism, facilitating the smooth opening and closing of the refrigerator door. The door cam helps to lift and lower the door slightly as it opens and closes, reducing stress on the hinges and ensuring a tight seal.
Causes of a bad Door Cam can include wear from regular use, cracking due to excessive force when opening or closing the door, or misalignment that prevents the door from functioning properly.
Symptoms of a bad Door Cam include:
- The refrigerator door making noise when opened or closed
- Difficulty in shutting the door completely
- Increased energy consumption as the fridge works harder to maintain its internal temperature due to a poor seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Fridge too warm
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10670845
The Ice Bucket is an OEM part for Whirlpool refrigerators. It is designed to collect and store ice produced by the refrigerator's ice maker. The ice bucket fits neatly inside the freezer compartment, providing a convenient place to access ice whenever needed.
Causes of a bad Ice Bucket can include cracks or damage from frequent use, deformation from exposure to extreme cold, or issues with the ice bucket's mechanism that could hinder the release or collection of ice.
Symptoms of a bad Ice Bucket include:
- Difficulty dispensing ice
- Ice clumping together
- Leakage or frost accumulation due to a poor seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My ice bucket was cracked and my crisper and meat pan were broken Wendell Y. • Bellwood , IL • April 18, 2015
I took apart the old bucket with a screwdriver and put the new one with no problems.
Read more
More
$92.95
- Compare At:
-
$110.61
- You Save:
-
$17.66
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.
Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.
Symptoms of a bad dryer light bulb may include:
- The bulb not turning on when the dryer door is open.
- Dim or flickering light inside the dryer drum.
- A burnt-out or broken bulb.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR5RXD1
The Whirlpool EveryDrop Refrigerator Water Filter 5 is an OEM replacement filter for Whirlpool refrigerators. This filter is used in Whirlpool bottom freezer and side-by-side refrigerators which accept Filter 5.
- Single Port Filter
- Simple turn installation requires no special tools
- For best performance, replace every six months
- Micron Rating: 0.5
- Filter Media: Coconut Carbon Block
- Flow Rate: 0.5 GPM
- Capacity: 300 gallons
- Temp Range: 33 - 100 °F
- Pressure Range: 30 - 120 psi
- Approximate dimensions: 2.30 x 3.00 x 11.60 Inches
- Meets NSF Standard: 42
- Approved for WQA Gold Seal
- Reduces 16 contaminants, including lead, mercury, asbestos, etc
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Not dispensing water
-
Touchpad does not respond
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Blue light was on on the front of the refrigerator door Elinor G. • Westhampton Beach , NY • August 25, 2014
I'm such a pro, I figured I needed a new hose for my water
dispenser so I ordered it. When it arrived I called my handyman.
He told me I did not need a hose I needed
A cartridge. So I had to return the hose and
order the cartridge!
Your company was so cooperative and made the return so easy
Thank you!
Next time I call the handyman first!
Read more
More
$79.26
- Compare At:
-
$94.32
- You Save:
-
$15.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2186443
The Water Filter Housing is an OEM part for Whirlpool refrigerators. It is designed to encase and support the water filter, ensuring it remains securely in place and functions effectively to filter out contaminants from the refrigerator’s water supply.
Symptoms of a bad Water Filter Housing include:
- Leaking water around the filter area.
- Difficulty in installing or removing the water filter.
- Unfiltered water bypassing the filter due to cracks or breaks in the housing.
Causes of a bad water filter housing can include cracking due to material fatigue, damage from improper filter installation or removal, or wear and tear from frequent filter changes.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter housing "in" and "out" lines leaked following replacement of water inlet valve Glenn F. • Columbus , IN • January 03, 2016
First Problem - WATER INLET VALVE - After having problems with ice maker not making ice, I troubleshot and replaced the water inlet valve. Video and instructions were excellent. With 16 year old fridge, the water lines had compression fittings in the old valve, so had to cut the fittings off with a razor blade to allow the lines to insert into the new valve press-in type fittings. Worked great / no leaks at the new valve.
But, new leaks occurred at the water filter housing spraying down into...
Read more
More
$56.64
- Compare At:
-
$72.01
- You Save:
-
$15.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180224
The Ice Dispenser Guide is an OEM replacement part for Whirlpool brand refrigerators. These brands also include Maytag, KitchenAid, Norge, Roper, Estate, and Kenmore models. It directs ice from the ice bucket to the dispenser chute. It helps to prevent jams by guiding the ice through the dispenser system smoothly and evenly.
You should replace the ice dispenser guide if you notice any signs of wear or damage, such as cracks or warping. A damaged dispenser guide can cause ice jams or blockages. This can prevent ice from dispensing properly or create excessive noise or vibration during the dispensing process.
Get yours today and restore proper ice dispensing function and prevent future issues with the ice dispenser system.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You
Ice cube dispenser/flap was broken not actuating the ice bucket motor. Peter P. • Sonoma , CA • July 24, 2023
Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy.
When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire...
Read more
More
$16.95
- Compare At:
-
$20.17
- You Save:
-
$3.22
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318165
The Door Closer Kit is an OEM part for Whirlpool refrigerators. This kit contains essential components for smooth refrigerator door closing: door cams and screws ensure gentle closure, proper seal, and prevent cool air leakage.
Parts in a door closer kit can wear out over time from frequent use, causing issues like improper closing, the need for extra force to shut, or failed sealing, affecting the refrigerator's cooling.
Symptoms of a bad Door Closer Kit include:
- The refrigerator door feels loose or wobbles when opened or closed
- The door does not close fully on its own or requires extra force to close
- You notice an increase in the refrigerator’s energy consumption due to cool air leaking
- Condensation or frost buildup near the door seal area due to improper sealing
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Fridge runs too long
-
Door sweating
-
Door won't open or close
See more...
Do-It-Yourself Stories from Customers like You
My refrigerator door would pop when it was opened or closed. Jim T. • Venice , FL • April 04, 2014
Replaced the lower auto close hinge. Used your web video as a guide.
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79