Kenmore Refrigerator 253.77137791 (25377137791, 253 77137791) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 241798231
The Refrigerator Ice Maker Assembly is an OEM replacement part for Frigidaire refrigerators. It plays a crucial role in the appliance by automatically producing ice, ensuring you have a constant supply of ice cubes for your beverages and cooling needs. Designed to fit perfectly into your Frigidaire refrigerator, this ice maker assembly includes the ice mold and the control device that fills it with water, freezes the water into ice, and then ejects the ice into a storage bin.
Causes of a bad Ice Maker Assembly can include mechanical failures, water supply issues, or electrical malfunctions.
Symptoms of a bad ice maker assembly can include-
- No ice production
- Debris in the ice
- Ice not emptying from the icemaker
- Leaking water
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Ice maker stopped making ice. Steve C. • Dripping Springs , TX • September 30, 2019
Well, I got online and found several YouTube videos on how to check what was happening. I have a multimeter and tools. I first replaced the external water filter just to make sure it wasn't that, and it needed it. That wasn't the problem. I then removed the water inlet valve which was really easy. I didn't disconnect the water lines but I did unplug the power plug. Using the ohms setting on the meter, I tested the coil of the valve solenoid. It wasn't open. I checked the voltage at the plug...
Read more
More
$98.53
- Compare At:
-
$116.27
- You Save:
-
$17.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 215846602
The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours.
Symptoms of a bad defrost timer include:
- Inability to initiate or maintain the defrost cycle
- Excessive ice buildup in the freezer compartment
- Erratic temperature fluctuations
- The refrigerator running excessively or displaying other performance issues
Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Frost buildup
-
Fridge runs too long
-
Freezer too cold
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Not cooling properly eventually evaporator fan failure Richard D. • Wood Ridge , NJ • April 25, 2016
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases.
Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304464438
The Compressor Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component is essential for providing the necessary torque to start and maintain the operation of the compressor motor, which is responsible for cooling the refrigerator.
Symptoms of a failing compressor run capacitor include:
- The refrigerator not running or cooling properly
- The compressor failing to start or running intermittently
- Humming or buzzing noises coming from the compressor area
Causes of needing to replace the compressor run capacitor can include normal wear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
This part fixes the following symptoms
-
Won't start
-
Too warm
-
Fridge too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
My Frigidaire frost free commercial freezer was screeching louder than the wheels on my radio flyer red wagon when it was overloaded with 5 cent return for deposit coca cola bottles back in the 1960's Daniel G. • El Paso , TX • January 24, 2021
In short - I replaced the evaporator fan motor and the evaporator fan blade.
The Appliance Parts Pros website was extremely helpful to me. Here's how.
1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux.
2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help.
3. The site provided guidance videos (not...
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308000010
The Evaporator Fan Blade is an OEM part for Frigidaire refrigerators, designed to circulate air over the refrigerator coils and through the food compartment. The fan blade works in conjunction with the evaporator fan motor, and together, they play a key role in the cooling process by distributing cool air evenly throughout the refrigerator and freezer.
Causes of a bad evaporator fan blade can include physical damage, such as cracks or bends in the blade itself, which can occur over time due to wear and tear or during cleaning and maintenance.
Symptoms of a bad Evaporator Fan Blade include:
- Unusual noises coming from the refrigerator, such as humming or buzzing
- The refrigerator or freezer compartment is not cooling adequately
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
1: loud noise on freezer side. 2: no water dispensing Matt M. • Pickett , WI • February 05, 2021
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was.
2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 215473602
The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep.
Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.
Symptoms of a bad Door Shelf Support include:
- Shelves leaning or sagging noticeably
- Difficulty in fitting the shelf into the door
- Cracks visible in the support
- Shelves falling off or failing to hold items securely
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken water control on door Greg K. • Newton , MA • October 07, 2014
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 215366002
The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length.
You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.
Symptoms of a bad door shelf bar include:
- Items falling from the door shelf
- Visible cracks or breaks in the bar
- Difficulty keeping items securely in place
- The bar not fitting properly or staying attached
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken and missing shelf door bar Corey C. • Marina Del Rey , CA • February 06, 2015
I replaced the bar and rack support. It was fairly easy. I measured the shelf and cut the bar to size. Then I inserted the bar into the shelf support and the inserted the bar and supports into the slots on the left and right. Thanks Appliance Pros for the fast delivery and the exact items that were ordered.
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 215267701
The Door Shelf Support is an OEM part for Frigidaire refrigerators, designed to hold and support the shelves on the inside of the refrigerator door. This part ensures that door shelves are securely mounted, providing stable storage for bottles, condiments, and other items.
Symptoms of a failing Door Shelf Support include:
- Shelves becoming loose or sagging
- Difficulty in keeping items securely on the door shelves
- Cracks or breaks in the support
Causes of a bad Door Shelf Support can range from normal wear and tear, to accidental damage, such as overloading the door shelves with too much weight or impact from moving items in and out. Over time, the stress of weight and use can lead to the supports becoming damaged.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken water control on door Greg K. • Newton , MA • October 07, 2014
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918277
The Replacement Icemaker is an OEM part for Frigidaire side-by-side refrigerators. It serves the critical function of automatically producing batches of ice cubes on demand. Note: The Icemaker Kit comes with an adaptor harness that may be needed for some applications. The harness converts a 4 pin connector to a 3 pin connector.
Causes of a malfunctioning icemaker can vary. They may stem from failed control sensors affecting conductivity and freeze times, scaled or corroded water lines, or an ice basket mold with broken fins and louvers.
Symptoms of a bad icemaker include:
- Reduced or inconsistent ice production
- Ice cubes getting jammed or fused together
- Water leaks or spray inside the freezer
- Strange sounds or mechanisms not working
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Our 21 year old frigidaire refrigerator refused to make ice. Lindsey M. • Burlington , KY • August 31, 2018
After about three months of returning to my youth, filling ice cube trays, I decided to venture into the freezer and yank the old ice maker from its mounting. Since this was the third time this very ice maker had decided to stop functioning, it was time to get a replacement. I suspected the heating element was open and the motor was screaming trying to push the little frozen blocks of ice from their form, with distortion occurring. I ordered a replacement from this very company, received it...
Read more
More
$65.95
- Compare At:
-
$144.53
- You Save:
-
$78.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303917954
The Defrost Thermostat is an OEM part for Frigidaire refrigerators. It monitors the temperature of the evaporator coils and activates the defrost heater when necessary. This process prevents frost buildup on the coils, ensuring the refrigerator maintains optimal cooling efficiency.
You should replace the defrost thermostat if it becomes faulty or damaged. Common causes of a bad defrost thermostat include electrical failures, regular wear and tear, or temperature fluctuations that can degrade the component over time.
Symptoms of a bad defrost thermostat include:
- Excessive frost buildup on the evaporator coils
- Refrigerator not cooling properly
- The defrost cycle not activating
- Increased energy consumption
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Freezer too cold
-
Freezer not defrosting
-
Fridge runs too long
-
Fridge too cold
See more...
Do-It-Yourself Stories from Customers like You
Frig not cold and not all item in the freezer were being frozen ice not being made Gary M. • Raleigh , NC • September 30, 2015
My Frigidaire side by side refrigerator/freezer suffered a catastrophic failure. The symptoms were as follows:
1) Frig not cold
2) No Ice being made in the freezer section
3) Items at the back of the freezer were frozen but items on the door shelves would not freeze. The back of the freezer was cold but the closer you got to the door the warmer it got.
After removing everything from the unit I saw that there was substantial ice buildup on back of the freeze, specifically around the vents,...
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 218396700
The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.
Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.
Symptoms of a bad handle mounting block include:
- Loose, sagging or misaligned door handles
- Doors difficult to open or not staying securely closed/latched
- Noisy rattling coming from the door handle area
- Cracks or breaks visible in the mounting plastic
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 218906802
The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.
Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.
Symptoms of a bad light socket include:
- The refrigerator light not turning on
- Flickering or dim light
- Visible damage to the socket
- Electrical sparking or unusual noises when the light is on
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator light stopped working Ed O. • Rapid City , SD • March 01, 2015
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works. Appreciated the videos, ease in ordering and quick delivery.
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300158289
The Evaporator Motor is an OEM part for Frigidaire refrigerators. This component powers the evaporator fan, which circulates cold air throughout the refrigerator and freezer compartments, ensuring consistent temperatures for proper food storage. Compatible fan blade is part number AP2152058
Causes of a bad evaporator motor can include electrical issues, worn-out bearings, or obstruction by debris. A malfunctioning evaporator motor can lead to improper cooling and temperature fluctuations within the refrigerator.
Symptoms of a bad evaporator motor include:
- The refrigerator or freezer not cooling properly
- Unusual noises such as grinding or squealing from the freezer compartment
- Frost buildup on the evaporator coils
- The refrigerator running continuously without reaching the desired temperature
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer evaporator motor was howling Timothy M. • Marble Falls , TX • December 27, 2015
Once I purchased the correct motor it literally took less that 10 minutes from start to finish to replace the motor. After unplugging the refrigerator, I unscrewed two machine screws to remove the cover and unscrewed two machine screws to remove the motor. I removed the old motor from the housing, installed the new motor, reattached the motor to the refrigerator, replaced the cover, and plugged in the refrigerator. Installation was quick and simple. AppliancePartsPros service was excellent...
Read more
More
$101.30
- Compare At:
-
$120.55
- You Save:
-
$19.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 215503203
Specs: 10-16 X 0.500
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$5.35
- Compare At:
-
$6.37
- You Save:
-
$1.02
Genuine Frigidaire part
By: Frigidaire
Part Number: 215005101
This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.
- Fastens the designated component to the appliance cabinet or assembly
- Helps reduce looseness, vibration, and rattling
- Replaces missing, corroded, or stripped screws
- Supports proper alignment of panels, trim, and brackets
What's included: One screw Install notes:
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to the original location; retain any reusable clips or washers
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Deli/meat pan installment Kevin G. • Fort Lauderdale , FL • March 02, 2016
I had purchased a model refrigerator that did not come with the deli/meat pan, and I was told by the manufacturer's customer service department that my purchased model was not designed with the item.
I made comparisons with other models that had the deli/meat pan and found that the shelving alignments were the same so I decided to improvise and install the deli/meat pan.
The manufacturer's customer service department did assist me with obtaining the appropriate part numbers and I placed the...
Read more
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 218252201
The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.
Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.
Symptoms of a bad or missing screw include:
- Loose or wobbly components within the refrigerator
- Panels or fixtures coming apart or misaligned
- Difficulty securing parts during maintenance or repair
- Rattling or unusual noises during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door racks/door stop broken. Jennifer S. • Lincoln , NE • December 13, 2020
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from...
Read more
More
$10.70
- Compare At:
-
$12.84
- You Save:
-
$2.14