Kenmore Dishwasher 587.15413100A (58715413100A, 587 15413100A) Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Spring and Cable Assembly is an OEM replacement part for Frigidaire dishwashers. It contains both a spring and cable that coordinate moving parts to provide a balanced opening and closing of the dishwasher door.

Causes of a bad assembly can include failure of internal spring components due to fatigue from extensive use over time. Cables may also experience wear from constant flexing during door movement.

Symptoms of a bad Spring & Cable Assembly include:

• A sagging or unstable door that does not stay securely closed
• Difficulty smoothly opening and closing the door
• Improper latching that allows door to pop back open
• Excessive noise and vibration occurring during wash cycles

This OEM part fits Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Wheel Assembly is an OEM part for Frigidaire dishwashers. It includes 1 wheel necessary for attaching to the dishwasher rack, facilitating smooth and easy movement of the rack in and out of the dishwasher. This part is essential for the proper functioning of the dishwasher's loading and unloading process, ensuring convenience and efficiency.

Causes of a bad Wheel Assembly can include wear from regular use, damage from impact while loading or unloading dishes, or corrosion from exposure to water and detergent.

Symptoms of a bad Wheel Assembly include:

• Difficulty sliding the dishwasher rack
• Rack coming off its tracks
• Noisy operation when moving the rack

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. This valve controls the flow of water into the dishwasher, ensuring the correct amount of water enters the tub during the wash cycle.

Causes of a bad water valve can include mineral buildup from hard water, electrical failures, or wear and tear from regular use that affects the valve's ability to open and close properly.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Leaking water around the valve area
• Inconsistent or insufficient water levels during cycles
• Unusual noises when the valve is in operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement gasket creates a tight seal between mating components to prevent air and moisture leaks. It helps restore proper airflow and efficiency and can reduce vibration and noise when the original gasket is worn or damaged.

• Forms a seal between parts to prevent air bypass and moisture intrusion
• Helps maintain proper airflow and overall performance
• Cushions components to reduce vibration and rattling
• Replace if the gasket is torn, brittle, compressed, or missing
• Common symptoms include drafts/air leaks, condensation at the seam, unusual noise, or reduced cooling/dehumidifying performance

• Disconnect power to the appliance before servicing
• Remove covers or panels to access the sealed joint; note the gasket's routing/orientation
• Clean and dry mating surfaces; remove old adhesive/foam debris
• Install the new gasket without stretching; press evenly, reassemble, and check for a uniform seal

This seal kit restores a tight, insulated barrier around a window air conditioner. Replacing worn or missing seals helps block gaps and drafts, reduce noise and vibration, and maintain efficient cooling performance.

• Creates an air-tight barrier between the unit, sash, and window frame
• Helps reduce warm air infiltration, dust, and insects entering around the A/C
• Supports proper cooling by minimizing recirculation of hot outdoor air
• Helps resolve drafts, reduced cooling, condensation at the cabinet, or rattling noises

• Unplug the unit before servicing; work on a cool appliance
• Remove old foam and adhesive; clean and dry surfaces before applying new seals
• Measure and cut seals to length; avoid stretching or compressing the foam during install
• Press firmly to ensure full contact; follow your model's installation guide for placement

The Drain Pump is an OEM part for Frigidaire dishwashers. It is responsible for removing water from the dishwasher tub at the end of each cycle. The drain pump works in conjunction with the drain hose to efficiently expel dirty water and ensure dishes are thoroughly dried.

Symptoms of a bad drain pump include:

• Water not fully draining out of the bottom of the dishwasher tub
• Puddles or standing water left inside after a cycle is finished
• Mildewy or musty smells emitting from the appliance
• Loud or grinding noises coming from the drain pump motor area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Restore a secure, reliable door closure. This replacement door latch engages the door mechanism so the appliance recognizes the door is closed and can operate as intended, preventing nuisance "won't start" issues caused by a broken latch. What it does:

• Keeps the door closed and properly aligned with the catch
• Engages the door mechanism/switches so the unit can run when shut
• Replaces worn or broken latch hook tabs
• Common symptoms: door won't close or stay latched; unit won't start; must push/hold door to run; visible broken latch hook

• 1 door latch

• Disconnect power before servicing; wear cut-resistant gloves
• Access the door's inner panel/trim to reach the latch; protect glass and finishes
• Note spring/clip orientation if present and transfer any reusable hardware
• Test door latching and proper operation before final reassembly

This heater assembly restores heat production in electric dryers so clothes dry efficiently. It replaces a failed heating element and helps return the appliance to normal drying performance. What it does:

• Heats air passing through the dryer drum so laundry dries during operation
• Replaces a burned-out or open heating element that causes no heat or weak heat
• Addresses long dry times and extended cycles when the element isn't functioning
• Works with the dryer's blower and thermostatic controls to maintain proper air temperature

• Disconnect power at the breaker before starting any repair; this part carries live voltage during operation
• Handle the heating element carefully to avoid bending or damaging the coil
• Inspect fuses, thermostats, wiring, and connectors while replacing the heater to ensure full repair
• Follow the appliance manufacturer's service instructions for disassembly and reassembly

The Mounting Bracket is an OEM part for Frigidaire dishwashers. It is a metal component that secures the dishwasher to the surrounding cabinetry. The mounting bracket provides structural support and stability during operation.

Causes of a bad mounting bracket can include damage from installation/removal, cracks or deformities from heavy loads, or broken welds/fasteners holding it in place.

Symptoms of issues with the mounting bracket include:  

• Excessive vibration or shaking of the dishwasher during cycles
• The unit not sitting level or secured properly in the space
• Noises related to movement that shouldn't occur
• Visible damage or instability of the unit 

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.

This push-button door switch detects when the appliance door opens and closes, enabling the interior light and informing the control system. Replacing a faulty switch restores normal door-sensing and light operation. What it does:

• Activates the interior light when the door opens and turns it off when closed
• Sends a door-open/closed signal to the appliance control so timed features behave correctly
• Commonly replaces a switch that causes the light to stay off or fail to turn off
• Helps eliminate intermittent lighting or door-sensing problems

• Disconnect power before starting any repair to avoid shock or injury
• Access may require removing the light housing or door trim; keep fasteners for reassembly
• Verify the old switch matches this part number and connector style before installing

This rack assembly restores a sturdy, properly fitting rack inside your appliance so items are supported and move smoothly on the rails. Replace a bent, rusted, or missing rack to keep loading safe and performance consistent. What it does:

• Provides a stable surface for loading items during use
• Aligns with factory rails for correct fit and smooth in/out movement
• Replaces racks that are bent, warped, broken, rusted, or missing
• Helps prevent snags or stains caused by damaged or flaking rack wires

• One rack assembly

• Disconnect power; allow it to cool completely
• Pull the old rack straight out of the rails; if your model uses rack stops or clips, transfer them from the original
• Slide the new rack into the rails until fully seated
• Verify smooth travel and proper clearance before use