Kenmore Range 790.45714102 (79045714102, 790 45714102) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
The Oven Temperature Probe is an OEM part for Frigidaire ovens. This part monitors the oven's internal temperature, ensuring that it accurately reflects the set temperature on the oven's control. By measuring the heat inside the oven, the temperature probe helps in maintaining consistent cooking results, preventing undercooking or overcooking of food.
Over time, the oven temperature probe can fail or become inaccurate due to wear and tear, exposure to extreme temperatures, or damage from cleaning and handling. This can lead to uneven cooking results, with food being overcooked or undercooked, despite setting the oven to the correct temperature.
Symptoms of a bad Oven Temperature Probe include:
- Oven not reaching the set temperature
- Oven temperature fluctuating more than usual
- Food not cooking evenly or within expected time frames
- Error codes displayed on the oven indicating a temperature sensor issue
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505695
The Spark Module is an OEM part for Frigidaire gas ranges. It allows precise flame control for cooking. This module sends the necessary electrical currents to the igniters at each burner, which then spark to ignite the gas.
Causes of a bad spark module can include electrical failures, corrosion, or moisture damage, as well as wear and tear from normal use.
Symptoms of a bad Spark Module include:
- Burners failing to ignite despite being turned on
- Intermittent ignition or weak spark generation
- Continuous clicking sounds from the burner area even after ignition
- Unlit burners leading to gas smell, indicating incomplete combustion
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas oven won't light Robert P. • Randleman , NC • October 11, 2015
Watched repair video's to learn where parts were located. Put replacement in and it worked great!
Read more
More
$51.75
- Compare At:
-
$61.58
- You Save:
-
$9.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803
Has three terminals.
Do-It-Yourself Stories from Customers like You
Oven light stayed on when door was closed Robert S. • Jacksonville , IL • June 14, 2015
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
The Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for controlling the temperature and operation of the warming drawer or zone feature.
Causes of a bad Switch can include electrical malfunctions or short circuits, mechanical wear from repeated use, and exposure to moisture or debris.
Symptoms of a bad Switch include:
- Inability to activate or control the warming drawer or zone
- Erratic temperature fluctuations
- Overheating or failure to heat the warming area
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 316105501
Note: Due to a factory change, the new glide may be shorter than your original. Per Factory: The original part was 19.75". The new part is 16.25" and will install and function the same.
More
$69.35
- Compare At:
-
$82.53
- You Save:
-
$13.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Length: Approx. 82 1/2"
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$97.65
- Compare At:
-
$116.20
- You Save:
-
$18.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 318148700
This replacement igniter lights the gas in your range or wall oven. It restores dependable burner ignition so cooking starts promptly and safely when you turn the control or select a bake/broil setting.
- Generates the ignition source (spark or heat) required to light the gas at the burner
- Common symptoms of a failed igniter: burner won't light, no spark/glow, intermittent or delayed ignition
- Replacing a weak or cracked igniter helps prevent raw gas buildup and improves lighting consistency
What's included: One igniter Install notes:
- Disconnect power and shut off the gas supply before servicing
- Handle the igniter element/ceramic carefully; avoid impact and contamination
- Reuse existing mounting hardware and route leads away from heat/flame as originally installed
- After installation, restore gas and power, then test for prompt ignition and proper flame; check for leaks
Do-It-Yourself Stories from Customers like You
Needed to replace burner pan and igniter Ron W. • Indianapolis , IN • December 06, 2015
Very easy fix. Lifted off the grill and burner. Unscrewed 2 screws. Pulled the burner pan up and off. Disconnected the wire to the igniter. Used needle nosed pliers to remove the clip holding the igniter in place. Removed the gasket from the old burner pan.
Placed the new igniter in the hole of the new burner pan and slipped the old clip on the igniter to hold it in place. Then put the old gasket on the new burner pan. Then connected the igniter wire to the new igniter and put the burner pan...
Read more
More
$47.95
- Compare At:
-
$57.54
- You Save:
-
$9.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 318175510
This machine screw adjusts and secures the leveling leg or bracket, helping you set the appliance stable and plumb. Replacing a stripped, bent, or missing screw restores a solid footing and makes accurate leveling possible.
- Threads into the base or leveling bracket to raise or lower the appliance for proper leveling
- Helps reduce rocking, wobbling, and vibration from an unlevel installation
- Common signs of wear: stripped threads, bent hardware, corrosion, or a missing screw
- Useful during installation or when the existing adjustment screw no longer holds
What's included: 1 screw Install notes:
- Disconnect power; shut off gas before working
- Support the appliance to relieve weight on the leveling point
- Remove the damaged screw; inspect and clean mating threads
- Start the new screw by hand to avoid cross-threading, then adjust height and snug
Do-It-Yourself Stories from Customers like You
Dryer drum was banging on every rotation Michael S. • Tequesta , FL • July 01, 2016
Replaced the rear rollers. Video of job on your website made it easy.
Read more
More
$31.95
- Compare At:
-
$38.34
- You Save:
-
$6.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 318095957
Replacement motor that restores mechanical drive or airflow in select Frigidaire appliances. Installs in place of the original motor to help return normal rotation, tumbling or fan operation. What it does:
- Drives rotating components (drum, tumbler, agitator or fan) depending on application.
- Helps restore normal spin, tumble or airflow when the original motor fails.
- Common symptoms: appliance won't start or spin, weak/uneven rotation, loud humming/grinding, or reduced airflow.
- Direct-fit replacement designed to match original mounting and electrical connections for specified models.
What's included: One motor. Install notes:
- Disconnect power (and water if applicable) before beginning any work.
- Avoid pulling on wires; reconnect all harnesses and secure mounting fasteners per OEM instructions.
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
See more...
Do-It-Yourself Stories from Customers like You
F9 door fault Alan D. • Hamilton , NJ • November 27, 2015
Replace door lock motor and switch assy
Read more
More
$99.33
- Compare At:
-
$119.20
- You Save:
-
$19.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318163400
Do-It-Yourself Stories from Customers like You
Gas burner would not light Phyllis S. • Longmont , CO • November 10, 2018
Actually we called Sears repair and they did a good job diagnosing and fixing the problem (Jacob). But they never supplied the part after more than a month, so we got the number from them and ordered it ourselves from you. We had already paid for it, so had them do the work.
We would have fixed it ourself but could not figure out how to lift up the entire range top and videos we found were for a totally different stove top and we had no information how to get to the part to replace it.
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053901
This door gasket seals the refrigerator door to help keep cold air in and warm, humid air out—reducing frost build-up and helping the appliance run more efficiently. Fits where a full perimeter door seal is required. What it does:
- Creates an airtight seal around the refrigerator door to maintain consistent internal temperatures.
- Helps prevent warm air infiltration, moisture, and frost accumulation inside the compartment.
- Reduces energy waste caused by a failing or damaged door seal.
- Common symptoms of a bad seal: condensation at the door, frost on shelves, fluctuating temperatures, or higher energy use.
What's included: One refrigerator door gasket (single complete door seal). Install notes:
- Disconnect power to the appliance before attempting any service.
- Remove the old gasket carefully; replacement typically seats into the door channel around the full perimeter.
- Inspect and, if needed, adjust door alignment and hinge condition to ensure a proper seal.
Do-It-Yourself Stories from Customers like You
The grates were 13 years old and the gaskets under the burner pan had deteriorated Michael D. • Townsend , MA • October 17, 2014
Unscrewed the burner pans and installed the new gaskets. Discarded the old grates and put the new grates on the stove...
What really amazed me was the speed in which my parts arrived... I called in my order on Monday and they arrived of Tuesday... Great customer service!!!
Read more
More
$35.95
- Compare At:
-
$70.99
- You Save:
-
$35.04