Lg Refrigerator LRTN22330TT Parts
Genuine Lg part
By: Lg
Part Number: 6749C-0014E
Refrigerator clicking but not cooling? The compressor start relay kickstarts your compressor. Simple 30-minute DIY fix that gets your fridge cold again.
Do-It-Yourself Stories from Customers like You
Refridgerator stopped cooling Gary S. • Madison , WI • April 13, 2015
Replaced the Thermistor Assembly and also picked up Overload Protection circuit per the comments posted by the "experts" on the web site. Both parts cheap enough. I ordered parts at 3:30 in the afternoon and they showed up the next morning from half way across the country. Outstanding service. It also fixed the 9 year old refrigerator. Replacing the parts took about a half hour most of which was moving the unit from the wall and removing the panel to get at the parts.
Read more
More
$45.30
- Compare At:
-
$54.36
- You Save:
-
$9.06
Genuine Lg part
By: Lg
Part Number: 6500JB2001B
The Refrigerator Temperature Sensor is an OEM part for LG refrigerators. This sensor monitors the temperature inside the refrigerator and communicates with the control board to maintain the optimal cooling environment.
Common causes of failure include wear and tear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can lead to inaccurate temperature readings, resulting in improper cooling or freezing.
Symptoms of a bad refrigerator temperature sensor include:
- Inconsistent refrigerator or freezer temperatures
- Food spoiling faster than usual
- Refrigerator running continuously or not running at all
- Error codes displayed on the control panel
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
It did not stay cold refrigerator/freezer Richard L. • Shelton , CT • September 19, 2019
I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great.
Read more
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Lg part
By: Lg
Part Number: 4984JJ3003A
Replacement door hinge bushing for refrigerators. Installs in door hinge mechanism. Replace when worn, cracked, or causing door grinding or misalignment.
Do-It-Yourself Stories from Customers like You
Worn nylon bushing on door Michael K. • Port Charlotte , FL • July 23, 2019
Elderly neighbor charged $100 for factory tech to inform her that the part wasn't available anymore, so I ordered 2 from Appliance Parts Pros.com (one for a spare) and when they arrived a few days later, I installed then in about 20-25 minutes. I had to remove all the food off the door shelf so I could lift the door off the hinge to replace the bushing. That took 5 minutes. Shame on the tech that went by the date of manufacture rather than checks by model and serial number to see if the part...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Lg part
By: Lg
Part Number: 6500JB2002T
This is a temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the main control board. The control board uses this data to regulate the compressor and cooling cycles. Replace this sensor if the refrigerator is too warm, too cold, runs continuously, or displays incorrect temperature readings.
Do-It-Yourself Stories from Customers like You
LG refrigerator not cooling but freezer worked after viewing videos and talking to AppliancePartsPros, I ordered the parts Robert C. • Flowery Branch , GA • November 30, 2019
I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on.
Read more
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93
Genuine Lg part
By: Lg
Part Number: 5251JA3003D
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
Do-It-Yourself Stories from Customers like You
The condensing fan motor would not turn with power applied. Stephanie H. • Rio Vista , TX • August 29, 2017
I found the condensing fan motor would not turn with power applied. I also found a drain tube cracked and breaking.
I had to use a snub nose screwdriver to remove and replace condensing fan motor. The power wires were simply a snap on. The new drain tube just slipped on.
Thanks for the speedy delivery!
Stephanie Hobbs
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Lg part
By: Lg
Part Number: ADH73150210
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
More
$93.95
- Compare At:
-
$110.86
- You Save:
-
$16.91
Genuine Lg part
By: Lg
Part Number: 1SZZJA3011B
The Screw is an OEM part for LG refrigerators. This part secures the shelf brackets within the refrigerator compartment.
Causes of a bad Screw can range from physical damage or impact to general wear and tear over time.
Symptoms of a faulty Screw include:
- Shelves feeling loose or unstable
- Shelves sagging or not sitting level
- Shelves falling out or collapsing when loaded with items
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Kenmore elite refrigerator: broken crisper cover > drawer rollers broke off Ronald J. • Missouri City , TX • May 16, 2015
Kenmore Elite refrigerator 795.77542600
Fixed by replacing crisper cover. The purchased crisper cover lacks the printed pictures and text that was present on the front of the original, but it was no big deal.
The difficult part of the repair was transferring the (1) plastic humidity adjusters for vegetable/fruit drawer, (2) plastic crisper drawer covers, and (3) metal bar on front underside of crisper cover.
Removal of the adjusters and drawer covers requires you to bend/distort the plastic...
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Lg part
By: Lg
Part Number: 4975JJ2002A
Rail guide assembly that supports and steers refrigerator drawers along their tracks. Replace if cracked, broken, or worn to restore smooth sliding.
Do-It-Yourself Stories from Customers like You
Broken snack drawer guide Robert W. • Lapeer , MI • January 16, 2017
I was unable to find the snack drawer guide which was mounted under the middle of the large shelf for my LG refrigerator. In the parts description for my model the snack drawer was mounted under a small shelf. By ordering a right hand drawer guide with a right hand shelf bracket, I was able to move the left shelf bracket and guide from the large shelf to the small shelf. Take the right small shelf bracket and put it on the large shelf. Install the new parts to the right side of the small...
Read more
More
$32.26
- Compare At:
-
$38.39
- You Save:
-
$6.13
Genuine Lg part
By: Lg
Part Number: ADX52752649
Creates an airtight seal to keep cold air in. Replace if torn, loose, or causing frost buildup. Restores efficiency and proper temps. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
I needed new gaskets for the freezer and refrigerator doors William N. • Lakeside , CA • May 08, 2020
I watched a YouTube video on how to do it. It was very easy, no tools needed, just pulled out the old rubber and put in the new one.
Read more
More
$218.67
- Compare At:
-
$244.40
- You Save:
-
$25.73
Genuine Lg part
By: Lg
Part Number: 5901JJ1003A
This replacement fan blade mounts on the fan motor to move air for proper cooling. A cracked, loose, or damaged blade can cause noise and weak airflow—replacing it restores smooth, reliable air circulation. What it does:
- Drives airflow to help maintain stable temperatures throughout the appliance
- Supports efficient cooling by circulating air across key areas
- Common symptoms include rattling or scraping near the fan, vibration, or wobbling
- Replacement is recommended if the motor runs but the blade slips, doesn't spin, or is visibly damaged
What's included:
Install notes:
- Disconnect power before servicing
- Access the fan area by removing covers/shelves as needed
- Note blade orientation; pull the old blade straight off the shaft and press the new blade on until fully seated
- Spin the blade by hand to confirm clearances, reassemble, and restore power
Do-It-Yourself Stories from Customers like You
LG evaporator fan and motor Carole M. • Kirksville , MO • June 05, 2020
Kenmore LG Refrigerator. Freezer froze up and frig quit working, Watch 3 different video on LG evap problems. Videos helped with disassembly. Once apart, fan would not come off old motor. Broke on removing. Had to order blade too. Advice, cut shaft off motor and lay fan flat and push shaft out. After ordering parts, another supplier return part inquiry call and he suggest that the auto defrost board be replaced too. It was $16.00 and free freight, so I also installed it. I hit...
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Lg part
By: Lg
Part Number: MHA62513601
Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.
More
$18.77
- Compare At:
-
$22.34
- You Save:
-
$3.57
Genuine Lg part
By: Lg
Part Number: 5218JJ3001A
Mounts inside your refrigerator to guide storage drawers for smooth opening and closing. Replace if cracked, broken, or worn to restore drawer alignment.
Do-It-Yourself Stories from Customers like You
Simply put broken parts John K. • Milford , CT • September 25, 2015
Changed the parts.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Lg part
By: Lg
Part Number: 1STZJA3004F
Door hinge screws secure the refrigerator door hinges to the cabinet frame, allowing proper door operation and alignment. Replace when doors sag, don't close properly, or screws are loose, stripped, or missing causing door misalignment.
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Lg part
By: Lg
Part Number: 3391JJ2004H
Shallow deli drawer for storing meats and cheeses in your refrigerator. Replace when cracked, broken, warped, or missing to restore organized storage.
More
$119.37
- Compare At:
-
$142.05
- You Save:
-
$22.68
Genuine Lg part
By: Lg
Part Number: MFT62346511
This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.
- Attaches to the outer panel to display brand/series identification
- Restores a finished appearance where the original emblem sits
- Direct replacement for a lost, damaged, or worn badge
- Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration
What's included: 1 name plate Install notes:
- Disconnect power before servicing the appliance
- Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
- Clean and dry the mounting surface; remove all residue for best fit
- Align with the recess/holes and press evenly until fully seated
Do-It-Yourself Stories from Customers like You
Two issues water in the bottom of fridge and clicking noise Leroy B. • Colorado Springs , CO • January 19, 2015
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Lg part
By: Lg
Part Number: AEJ73579702
This holder assembly is a structural mounting piece that supports and secures an internal component in your appliance. Replacing a cracked or worn bracket helps restore proper alignment and keeps parts stable during everyday use.
- Provides a rigid mounting point for the attached component
- Keeps parts aligned to reduce movement and vibration
- Helps prevent rattling or noise from loose mounts
- Common signs of failure: visible cracks/broken tabs, looseness, or parts that won't stay seated
What's included: 1 holder assembly Install notes:
- Disconnect power and, if applicable, turn off the water supply before service
- Note the orientation of the original part to match fitment
- Reuse existing mounting screws or hardware unless the manufacturer specifies otherwise
- Do not overtighten fasteners; the secured component is fully seated and stable
Do-It-Yourself Stories from Customers like You
Had to reinstall ice maker. Mark W. • Dayton , OH • August 25, 2018
Installed new screws.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84