Bosch Refrigerator B36ET71SN Parts

Fixes ice buildup in refrigerator gutter systems. This heating element prevents ice dams and keeps drainage clear in bottom-mount refrigerators.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

The Water Valve is an OEM part for Bosch refrigerators. It regulates the flow of water into the ice maker and water dispenser.

The water valve allows water to fill the ice maker bucket or flow through the dispenser chute on demand. It controls water pressure and assists in proper ice formation.
Over time, mineral buildup can affect a water valve's ability to open and close smoothly. 

Symptoms of a bad water valve include:

• Slow or inadequate water flow from the dispenser
• Ice maker not filling or producing ice fully
• Water leaking inside refrigerator compartments
• No water dispensing when button is pressed

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Interior cabinet divider wall that restores proper compartment separation in your refrigerator. Replaces cracked, broken, or missing dividers.

Fix unresponsive buttons or blank displays with a new refrigerator control board. This interface module restores cycle selection and status information.

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This fixture is a small mounting bracket that secures internal dishwasher components to the tub, helping maintain proper alignment and reduce vibration. Replaces worn or broken brackets to restore stable operation and prevent rattling or misalignment. What it does:

• Secures internal parts and assemblies to the dishwasher tub or frame
• Keeps components aligned to prevent rubbing, noise, or premature wear
• Helps maintain proper clearance for moving parts like racks or spray arms
• Can prevent intermittent contact that might cause rattles or vibration

• Disconnect power and water supply before starting any service
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit
• Typically installs with basic hand tools; follow OEM instructions for correct placement

Factory repair set restores proper refrigerator operation by replacing worn service components. Verify fit with your model number before ordering.

Fix frost buildup in your refrigerator with this evaporator defrost heater. Restores proper cooling by melting ice during defrost cycles. Easy repair.

Replace damaged or missing insulation panel inside your refrigerator cabinet. Restores thermal control and reduces noise. Use when original is torn or worn.

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

This is a wheel assembly designed for use in a refrigerator or freezer. It supports the smooth rolling movement of components such as drawers, baskets, or the unit itself. Replace this wheel if it is cracked, worn, or no longer rolling freely, which can cause drawers to stick or the appliance to be difficult to move.

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.