Bosch Dishwasher SMU50M05EU Parts

The Lower Dishrack is an OEM part for Bosch dishwashers. It provides the necessary rack space for washing dishes beneath the upper rack level.

As Bosch's signature FlexSpace design, it folds up for easy loading but must withstand heavy loads regularly. Causes of damage can include impact or misalignment bending the rack over time.

Symptoms of a problematic lower dishrack include:

• Difficulty folding/unfolding the bottom rack
• Loose fitment allowing rattling during the cycle
• Reduced rack space for full loads
• Cracks or breaks compromising integrity

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.

Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.

Dishes not getting clean? A cracked or clogged spray arm prevents proper water distribution. This replacement part restores even spray coverage.

Detergent releasing too early or leaking from the dispenser? This seal creates a watertight barrier to prevent premature dissolution. Easy 10-minute fix.

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

This switch is mounted on the dishwasher frame and detects when the door is properly closed to allow the wash cycle to begin. Replace it if your dishwasher won't start even with the door firmly closed, or if it stops mid-cycle unexpectedly.

Dishwasher door seal creates a watertight barrier around the tub opening. Replace if you notice leaks, moisture escaping, or visible cracks. Confirm fit with your model number.

Fix E4 water flow errors in your dishwasher with this flow meter sensor. Monitors water volume to ensure proper fill levels during wash cycles.

Replaces the rotating spray arm shower head in your dishwasher's upper rack. Install a new one if yours is cracked, broken, or keeps falling off the tube.

Replacement flip tine for dishwasher racks. Provides secure anchor point for dishes. Replace if broken, cracked, or missing to restore proper dish loading.

Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.

Fix dishwasher not filling with water or leaking at the water entry point. This inlet ensures proper water flow and prevents leaks where water enters.

Original installation hardware set for dishwashers. Includes mounting fasteners and brackets to secure components and panels. Replace worn or missing hardware.

This sensor monitors the clarity and cleanliness of the wash water inside the dishwasher, helping the control board determine how dirty the water is and whether additional wash cycles are needed. It plays a key role in optimizing water usage and ensuring dishes come out clean. Replace this sensor if dishes are consistently coming out dirty, wash cycles are running too long or too short, or the dishwasher is not properly adjusting its cleaning performance.

Creates a watertight barrier between dishwasher components. Replace if cracked, flattened, or leaking to prevent drips. Verify fit with your model.