Bosch WTA3510 UC/13 (FD 8111-) Parts

Dryer turns on but won't start? A faulty door latch prevents the cycle from beginning. This mechanism secures the door and completes the circuit.

This genuine OEM replacement part is a pulley assembly for dryers. Sometimes called an idler arm, the pulley assembly keeps the dryer drive belt under tension as the belt wraps around the dryer drum. If the dryer is no longer spinning properly and is making a lot of noise, the pulley assembly may need to be replaced. Luckily this repair is a relatively simple process.To remove the old dryer pulley assembly, start by making sure the dryer is unplugged. Remove the lint screen from the top of the dryer. Remove the two Phillips screws by the lint screen opening. Depress the clips that hold the top cover down. Lift the top cover and keep it in an upright position. Disconnect the wire harness to the switch that separates the connector. Remove the screws on the front panel. Lift the panel forward and set it to the side. Next, lift the drum and locate the pulley assembly under the drum. Lift the belt off the motor pulley to remove the assembly. Set the new pulley assembly in the same position as the old one and make sure everything is aligned. Rotate the drum to make sure it rotates smoothly. reinstall the panels.This replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador dryers.

This is a light bulb socket that mounts inside the dryer drum area and provides the electrical connection for the interior light. It allows the drum light to illuminate when the door is opened. Replace this socket if the dryer light does not turn on despite using a known good bulb, or if the socket shows signs of damage, corrosion, or a loose bulb connection.

Replacement front panel for your dryer. Restores the outer appearance and structure when the original panel is cracked, dented, or damaged. Direct fit.

Replacement drum for your dryer. This rotating cylinder tumbles clothes during drying. Order a new drum if yours is cracked, dented, or damaged.

Replacement power cord for your dryer. Installs at the rear panel to connect your dryer to the wall outlet. Replace if damaged, frayed, or missing.

Replace your dryer door gasket seal to prevent heat loss and improve efficiency. Essential when torn or worn. Verify fit with your model number.