Kenmore Refrigerator 106.55128701 (10655128701, 106 55128701) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11500948
Mounting bracket that secures the ice maker assembly to the refrigerator wall. Replace if cracked, broken, or missing to restore proper ice maker support.
Do-It-Yourself Stories from Customers like You
Not making ice. Alan S. • Las Vegas , NV • May 17, 2020
Replaced the ice maker. The kit came with everything I needed to replace the ice maker. Parts that did not come with the kit were re-used from the old one. My Whirlpool refrig/freezer is an older model so the wiring harness that came with the kit was different from my existing. So instead of disconnecting the ice maker wiring harness from the freezer, I had to disconnect the harness at the ice maker. That was a b..... Anyway after about 20 minutes, finally unhooked the connector. I had...
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W11512417
Directs defrost water from the evaporator to the drain pan. Replaces cracked, broken, or deformed drain tubes causing leaks or ice buildup issues.
Do-It-Yourself Stories from Customers like You
The problem was ice buildup on the floor of the freezer William B. • Pahoa , HI • January 15, 2016
A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction....
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2323197
If your freezer is icing up or coils are freezing, replace the defrost heater. Melts frost from evaporator coils during defrost cycle. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Circuit breaker would reset once refrigerator goes into defrost mode John C. • Elk Grove , CA • November 16, 2016
Replaced defrost heater with the help of the appliance parts pro how to video.
Video had made doing the job with ease. Had a laptop next to me making sure I had not missed a step. Been a week and things been all good. Well worth it. Thank you!
Read more
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250570
Supports your refrigerator at the base and lets you roll it forward for cleaning. Replace this roller assembly if cracked, broken, or seized to restore smooth movement.
Do-It-Yourself Stories from Customers like You
The plastic left rear wheel was coming apart and needed replacing Gary H. • San Antonio , TX • June 11, 2016
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203771
Refrigerator top hinge and pin that mounts to the cabinet and supports the door. Replace if broken, cracked, or worn to restore proper door alignment.
Do-It-Yourself Stories from Customers like You
Needed hinges for doors William H. • Niles , MI • September 22, 2015
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot
Read more
More
$56.34
- Compare At:
-
$66.48
- You Save:
-
$10.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Secures the bottom grille to your refrigerator frame. Replace if the original clip is cracked, broken, or missing and the grille won't stay in place.
Do-It-Yourself Stories from Customers like You
The water pressure from the door was a trickle and ice cubes we're hollow Patricia R. • Shoreline , WA • June 18, 2020
Did research on line and figured it was valve inlet part. The helpful video you provide made me realize that it was an easy job to complete. Yes it was easy because of the video and the part was exactly what was needed. We saved money by doing it ourselves. So while we were on the order site we ordered the brackets for the front grill. The old ones snapped off a long time ago. Again helpful video on your site on how to do the replacement ourselves. We now have water pressure back and that...
Read more
More
$7.34
- Compare At:
-
$8.07
- You Save:
-
$0.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
Replacement support stud that holds refrigerator shelves securely in place. Needed when original peg is broken, cracked, or missing from shelf wall.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2309758
Replace a cracked, broken, or missing freezer bin to restore organized storage in your refrigerator. Mounts on existing tabs or rails for secure access.
Do-It-Yourself Stories from Customers like You
Bin freezer broken Arthur H. • Miami , FL • May 16, 2016
I found the correct part and oredered. It was really great to receive that by next day in and I installed it.
I would recommend and use myself ApplianceParts Pro any time.
Arthur Hem
Read more
More
$80.95
- Compare At:
-
$96.33
- You Save:
-
$15.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206629B
Black door stop bracket for refrigerator door hinge assembly. Replace this part if your original bracket is cracked, broken, or missing from the door.
Do-It-Yourself Stories from Customers like You
Broken can Rayniero S. • Rockledge , FL • July 10, 2016
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete.
Read more
More
$28.43
- Compare At:
-
$33.55
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671W
White overflow grille for refrigerator water/ice dispenser. Replaces cracked, pitted, discolored, or missing grilles. Snaps into place below dispenser.
Do-It-Yourself Stories from Customers like You
Broken dispenser lever retainer ice guide and overflow grille Tony R. • Milford , DE • May 23, 2015
I watched the videos and made the repairs in a little over 5 minutes! It was great and if I ever need parts again I was use this site. I have told everybody about this site.
Read more
More
$56.34
- Compare At:
-
$66.48
- You Save:
-
$10.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-24004-109
Pan head screw secures panels, brackets, and trim on refrigerators and freezers. Replace missing, stripped, or damaged screws to restore proper fastening.
Do-It-Yourself Stories from Customers like You
Missing crisper drawer Doug D. • Peoria , AZ • March 23, 2020
Looked up model on your website. You had all the parts I needed, numbered and visually shown. Perfect!
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318952
Approximate measurement: 15" x 11"
Do-It-Yourself Stories from Customers like You
No problem just wanted an extra shelf Bob H. • Dayton , OH • January 30, 2015
Very nice sales representive, very helpful, polite, and very professional.., and super fast service. Ordered shelf and was on my door step in two days. I thought the price was high, but, then so is everything else these days. If the need arises, I will order again from this company.
Bob Hauff / Dayton, Ohio
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Door switch on dryer. James A. • Middleburg , FL • January 20, 2020
It was very easy to fix after watching your video..
Read more
More
$12.54
- Compare At:
-
$12.92
- You Save:
-
$0.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188756
This refrigerator unit cover mounts over the interior control/air distribution housing. It restores a clean, finished look and protects internal components by enclosing the area as designed. What it does:
- Provides a protective, finished cover for the control/diffuser housing
- Helps keep the airflow path properly enclosed inside the compartment
- Replace if the cover is cracked, warped, loose, or missing
- Common signs include rattling, visible gaps, or exposed components
What's included:
Install notes:
- Unplug the refrigerator before servicing
- Remove shelves or bins for access as needed
- Release tabs or remove screws to take off the old cover; retain hardware for reuse
- Align and secure the new cover; do not overtighten fasteners, then restore power
Do-It-Yourself Stories from Customers like You
Backing to frig broken shelves Margarita R. • Brabenton , FL • June 11, 2019
Screws and inserted shelves
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76