Kenmore Refrigerator 106.56664502 (10656664502, 106 56664502) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503695
$57.39
- Compare At:
-
$68.87
- You Save:
-
$11.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$15.40
- Compare At:
-
$16.94
- You Save:
-
$1.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2154473
Fix refrigerator electrical issues with this wire connector. Restores power to components when connections fail. Simple plug-in installation.
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
$14.00
- Compare At:
-
$14.89
- You Save:
-
$0.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203407B
Black plastic hinge cover for side-by-side refrigerators. Replaces cracked, broken, or missing hinge covers on the refrigerator door assembly.
More
$16.21
- Compare At:
-
$17.83
- You Save:
-
$1.62
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278733
Ice crusher not working or producing inconsistent crushed ice? This rotating crusher blade restores proper ice crushing when worn, bent, or cracked.
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
$53.21
- Compare At:
-
$63.85
- You Save:
-
$10.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$9.13
- Compare At:
-
$9.46
- You Save:
-
$0.33
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278732
Fix ice not dispensing properly with this ice crusher blade. Replaces free-wheeling or worn blades on the auger assembly. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203407W
White plastic hinge cover for refrigerator doors. Replaces cracked, broken, or missing hinge covers. Installs over door hinge mechanism for clean look.
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2260503W
Round cap button that covers the water filter housing on your refrigerator. Replace if cracked, broken, missing, or no longer snaps securely into place.
More
$24.60
- Compare At:
-
$29.27
- You Save:
-
$4.67
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2162358
This terminal block cover protects the appliance's electrical connection area from accidental contact and debris, helping reduce the risk of shorts and corrosion while keeping wiring secure and contained. What it does:
- Covers and shields the power terminal/block where the power cord connects
- Helps prevent accidental contact with live terminals and reduces short risk
- Keeps out dust, lint and debris that can cause corrosion or arcing
- Useful when the original cover is cracked, missing or showing burn marks
What's included: One terminal block cover (single piece) Install notes:
- Always disconnect power (unplug or switch off breaker) before servicing electrical components
- Typically installs over the terminal block and secures with the existing fastener(s); inspect mounting hardware for wear
- Replace if cracked, melted or if terminals are exposed; ensure cover seats fully before restoring power
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Out Of Stock
Usually ships within 4 - 14 days