Kenmore Refrigerator 106.56726601 (10656726601, 106 56726601) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10896764
Fix uneven cooling and warm spots in your refrigerator with this air baffle. Directs cold air properly throughout compartments. Simple DIY fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
Genuine Whirlpool part
By: Whirlpool
Part Number: 2324712
Refrigerator not cooling or freezer too warm? A faulty condenser may be the cause. This part helps dissipate heat for proper cooling performance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
Genuine Whirlpool part
By: Whirlpool
Part Number: 2150331
Protective wiring cover cap for refrigerators. Shields electrical connections from dust and damage. Replace if cracked, broken, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2261599
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11623163
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Do-It-Yourself Stories from Customers like You
My freezer was cooling but not fridge Charnel C. • North Lauderdale , FL • January 24, 2017
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go.
Read more
More
$49.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188756
This refrigerator unit cover mounts over the interior control/air distribution housing. It restores a clean, finished look and protects internal components by enclosing the area as designed. What it does:
- Provides a protective, finished cover for the control/diffuser housing
- Helps keep the airflow path properly enclosed inside the compartment
- Replace if the cover is cracked, warped, loose, or missing
- Common signs include rattling, visible gaps, or exposed components
What's included:
Install notes:
- Unplug the refrigerator before servicing
- Remove shelves or bins for access as needed
- Release tabs or remove screws to take off the old cover; retain hardware for reuse
- Align and secure the new cover; do not overtighten fasteners, then restore power
Do-It-Yourself Stories from Customers like You
Backing to frig broken shelves Margarita R. • Brabenton , FL • June 11, 2019
Screws and inserted shelves
Read more
More
$82.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400906
Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.
Do-It-Yourself Stories from Customers like You
Broken ice maker door and tabs David G. • San Antonio , TX • December 22, 2018
Through your website and YouTube DIY’s I was able to find the parts for my specific refrigerator and fix it, the wife had been after me for over a year to fix it and did not. I was ready to buy a new refrigerator but decided to try and fix it myself you guys rock !
Read more
More
$7.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018
This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.
- Locks the bearing/stack onto the shaft to prevent loosening
- Maintains alignment for smooth rotation and reduced vibration
- Helps restore consistent drive in shaft-driven assemblies
- Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
- Disconnect power before servicing; shut off water if working near dispenser components
- Remove the related assembly to access the shaft; note part order for reassembly
- Hand-start the nut to avoid cross-threading; verify thread direction against the original
- Tighten securely; inspect the bearing, washers/spacers, and shaft for wear
Do-It-Yourself Stories from Customers like You
The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes Morgan H. • Childersburg , AL • June 11, 2015
Replaced bearing nut with new one,took about 30 minutes.
Read more
More
$5.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2174249K
Wire shelf for the freezer compartment. Replaces a bent, broken, or missing shelf to restore sturdy, level storage space for organized frozen foods.
Do-It-Yourself Stories from Customers like You
The freezer section of my refrigerator was missing a shelf Miriam S. • Owings Mills , MD • August 22, 2018
I ordered a replacement shelf.
Read more
More
$134.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2179342
Crisper drawer won't adjust humidity or slide is broken? This humidity control slide mounts in the crisper cover to regulate airflow and moisture levels.
More
$20.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days