Kenmore Refrigerator 106.56994602 (10656994602, 106 56994602) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
Do-It-Yourself Stories from Customers like You
Kenmore washer made humming noise no agitation no more spin Peter W. • Cupertino , CA • October 18, 2026
Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11807379
Do-It-Yourself Stories from Customers like You
The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015
We bought a new ice guard and installed it. It is working really good now.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10896764
Fix uneven cooling and warm spots in your refrigerator with this air baffle. Directs cold air properly throughout compartments. Simple DIY fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11553819
This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does
- Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
- Helps isolate vibrating components from appliance chassis to lower perceived sound.
- Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
- Useful when worn, detached or hardened factory pads allow increased noise.
What's included
- One insul-sound deadening pad
Install notes
- Disconnect power before servicing an appliance to avoid shock or injury.
- Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
- Replace only in the original location; do not cover vents or moving parts.
- If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
Genuine Whirlpool part
By: Whirlpool
Part Number: 2324712
Refrigerator not cooling or freezer too warm? A faulty condenser may be the cause. This part helps dissipate heat for proper cooling performance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2150331
Protective wiring cover cap for refrigerators. Shields electrical connections from dust and damage. Replace if cracked, broken, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11623163
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Do-It-Yourself Stories from Customers like You
My freezer was cooling but not fridge Charnel C. • North Lauderdale , FL • January 24, 2017
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go.
Read more
More
$49.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670T
Discolored or stained dispenser grille? This overflow grille prevents water from leaking into the door liner. Easy 30-second snap-in installation.
Do-It-Yourself Stories from Customers like You
Noisy fan and grungy ice/water handles Andrew B. • Port Jefferson Station , NY • June 26, 2015
Your videos showing disassembly were invaluable. New parts fit perfect. Took awhile to clean surrounding parts before reinstalling new parts... but now 10 year old fridge looks like new!
Read more
More
$53.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400906
Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.
Do-It-Yourself Stories from Customers like You
Broken ice maker door and tabs David G. • San Antonio , TX • December 22, 2018
Through your website and YouTube DIY’s I was able to find the parts for my specific refrigerator and fix it, the wife had been after me for over a year to fix it and did not. I was ready to buy a new refrigerator but decided to try and fix it myself you guys rock !
Read more
More
$7.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018
This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.
- Locks the bearing/stack onto the shaft to prevent loosening
- Maintains alignment for smooth rotation and reduced vibration
- Helps restore consistent drive in shaft-driven assemblies
- Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
- Disconnect power before servicing; shut off water if working near dispenser components
- Remove the related assembly to access the shaft; note part order for reassembly
- Hand-start the nut to avoid cross-threading; verify thread direction against the original
- Tighten securely; inspect the bearing, washers/spacers, and shaft for wear
Do-It-Yourself Stories from Customers like You
The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes Morgan H. • Childersburg , AL • June 11, 2015
Replaced bearing nut with new one,took about 30 minutes.
Read more
More
$5.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2179342
Crisper drawer won't adjust humidity or slide is broken? This humidity control slide mounts in the crisper cover to regulate airflow and moisture levels.
More
$20.95
Out Of Stock
Usually ships within 4 - 14 days