Kenmore Refrigerator 106.58179701 (10658179701, 106 58179701) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2181929
Refrigerator not cooling properly? A damaged condenser fan motor bracket causes fan wobble and poor airflow. This mounting bracket restores stability.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488163
Replacement screw that secures panels, brackets, and trim to appliance cabinets. Restores reliable hold when original hardware is stripped or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278733
Ice crusher not working or producing inconsistent crushed ice? This rotating crusher blade restores proper ice crushing when worn, bent, or cracked.
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10142283
Replacement screw that fastens panels, brackets, and internal components. Install when original is stripped, rusted, missing, or lost during repairs.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843121
Drier tube for refrigerators. Installs in the sealed refrigeration system to remove moisture. Replace if cracked, corroded, or during compressor repairs.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2161324
Fix frost buildup in your refrigerator with this defrost heater mounting clip. Secures heater to evaporator for consistent defrosting performance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006908
Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.
Do-It-Yourself Stories from Customers like You
The ice bucket housing had disintegrated and the motor twisted off Lloyd W. • Streamwood , IL • January 08, 2026
I pulled out the old housing and unplugged the motor. It pretty much came out in pieces.
Remove the plastic from the motor, then had to take a pair of vice grips to hold the spindle in place to remove the auger. Remove what was still attached to the old Housing. Cleaned everything up and put the whole unit back together. The motor looked like it was somewhat cooked but still worked, so I ordered a new motor and auger to replace it. Because this fridge is 24 yrs old, Appliancepartspros...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119005
Positions and supports the refrigerator step or kickplate. Replace this spacer if worn, missing, or broken to restore secure alignment and fit.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2156021
This is a trim rail or retaining bar that attaches to the inside of a refrigerator or freezer door to hold a shelf bin in place. It clips onto the door liner and supports the shelf so items stay organized and secure. Replace this rail if it is cracked, broken, or no longer holds the door shelf securely, causing items to fall.
Do-It-Yourself Stories from Customers like You
Needed replacement shelf trim for freezer door and old rubber flap on ice chute was disintegrating Stephanie M. • Tyngsboro , MA • November 18, 2017
I checked on the Appliance Parts Pros website and found the exact parts. There was a full video showing how to remove the old part and install the new part. The video showed me what tools I needed and spelled out e-v-e-r-y-t-h-i-n-g. Might seem mundane to someone who is savvy in making these repairs but that is the whole point: Do not assume everyone just "knows" how to DIY these appliance parts. Thank you VERY much for the speedy shipment and step by step instructions and descriptions. I...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1108438
Extends the ice machine drain outlet for secure hose connection. Replace if cracked, broken, or missing to prevent leaks and ensure proper drainage.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155789
This fan scroll gasket seals the evaporator/fan housing to prevent air bypass and maintain proper airflow through the evaporator. Replacing a worn gasket helps restore efficient cooling and reduces frost buildup. What it does:
- Seals the fan scroll/evaporator housing to direct cold air through the evaporator fins
- Prevents air leaks that can cause reduced cooling or temperature fluctuations
- Helps reduce frost or ice buildup by ensuring consistent airflow over the coil
- Can reduce abnormal fan noise caused by air turbulence around a damaged seal
What's included: One fan scroll gasket. Install notes:
- Disconnect power to the appliance before beginning any work.
- Remove the evaporator/fan housing cover and carefully pull out the old gasket.
- Clean mating surfaces of debris and residue for a flush seal before installing the new gasket.
- Seat the gasket fully around the scroll; reassemble panels and restore power to test operation.
Do-It-Yourself Stories from Customers like You
Evaporator motor worked but was making the metal cover vibrate so loud that i distracted from converations and even the tv also the ice dispenser switch was intermittent Randall C. • Fort Worth , TX • July 06, 2026
Replaced Evaporator motor after watching the video. The new motor had the connectors on back side, but was still easy to hook up.
Also replaced the Dispenser Control bracket after watching the video.
Both jobs were very easy. So Quiet, I had to open the freezer to hear if the fan was running. Awesome!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2162358
This terminal block cover protects the appliance's electrical connection area from accidental contact and debris, helping reduce the risk of shorts and corrosion while keeping wiring secure and contained. What it does:
- Covers and shields the power terminal/block where the power cord connects
- Helps prevent accidental contact with live terminals and reduces short risk
- Keeps out dust, lint and debris that can cause corrosion or arcing
- Useful when the original cover is cracked, missing or showing burn marks
What's included: One terminal block cover (single piece) Install notes:
- Always disconnect power (unplug or switch off breaker) before servicing electrical components
- Typically installs over the terminal block and secures with the existing fastener(s); inspect mounting hardware for wear
- Replace if cracked, melted or if terminals are exposed; ensure cover seats fully before restoring power
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2260503W
Round cap button that covers the water filter housing on your refrigerator. Replace if cracked, broken, missing, or no longer snaps securely into place.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392901
13 oz. enamel spray paint in biscuit color for appliances. Restores scratched, chipped, or discolored surfaces on refrigerators, dishwashers, and more.
Do-It-Yourself Stories from Customers like You
Refrig had some scratches and small dots of rust Heather D. • Middletown , DE • December 31, 2014
Purchased bisque spray paint. Product is "almost" a perfect match as color of refrig; was not as glossy but did the trick.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10777924
Replacement wine rack for refrigerator door or shelf mounting. Securely holds bottles and prevents rolling. Replaces cracked, broken, or missing racks.
Do-It-Yourself Stories from Customers like You
No problem just wanted a wine rack for my fridge Kathleen A. • San Tan Valley , AZ • February 13, 2018
Ordered and received. Good service, thank you.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2172890
This wire assembly connects the capacitor to the appliance's motor or control, restoring a secure electrical path for reliable start/run operation. Replaces a damaged or worn harness to help resolve starting and intermittent power issues. What it does:
- Provides insulated wiring and terminals to link the capacitor to the motor or control
- Ensures a secure electrical connection for proper start/run signaling
- Can resolve symptoms such as failure to start, humming or intermittent motor starting
- Prevents shorts or arcing from frayed or damaged wiring when functioning correctly
What's included: One wire assembly Install notes:
- Always disconnect power at the breaker or unplug the appliance before servicing
- Capacitors can hold a dangerous charge — have the capacitor safely discharged before disconnecting wires
- Match connectors and routing to the original harness; secure wires away from moving parts and heat sources
More