Kenmore Refrigerator 106.59134801 (10659134801, 106 59134801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250570
This cabinet roller assembly supports the refrigerator at the base and lets you roll the unit forward for cleaning or service. Replace a cracked or seized roller to restore smooth movement and a stable, level stance. What it does:
- Supports the refrigerator cabinet and helps maintain proper leveling
- Allows the unit to roll for easier cleaning and servicing
- Replaces worn, cracked, or seized rollers and damaged brackets
- Helps resolve wobbling, uneven stance, scraping noises, or difficulty moving the fridge
What's included:
- One complete cabinet roller assembly
Install notes:
- Disconnect power and turn off the water supply before servicing
- Protect flooring and use a second person or an appliance dolly to safely tilt or move the unit
- Remove mounting fasteners, swap the assembly in the original position, and reuse hardware if applicable
- After installation, level the refrigerator and verify doors close and seal properly
Do-It-Yourself Stories from Customers like You
The plastic left rear wheel was coming apart and needed replacing Gary H. • San Antonio , TX • June 11, 2016
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The...
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2323197
This defrost heater warms the evaporator during automatic defrost to melt built-up frost so air can move freely and temperatures stay consistent. Replace a failed heater to restore normal cooling and end recurring frost on the freezer panel.
- Melts ice from the evaporator coil during the defrost cycle
- Prevents frost buildup that restricts airflow and causes warm spots
- Helps maintain stable refrigerator and freezer temperatures
- Typical failure signs: heavy frost on the back wall, reduced cooling, fan noise from ice contact, frequent manual defrosting
Includes: 1 defrost heater
- Disconnect power before servicing; wear cut-resistant gloves
- Access through the freezer compartment; remove shelves/ice bin and rear panel to reach the evaporator
- Match wire connections and route leads exactly as original; keep wiring clear of the fan and sharp edges
- After reassembly, restore power and monitor a defrost cycle; if frost quickly returns, also evaluate the defrost thermostat and control
Do-It-Yourself Stories from Customers like You
Circuit breaker would reset once refrigerator goes into defrost mode John C. • Elk Grove , CA • November 16, 2016
Replaced defrost heater with the help of the appliance parts pro how to video.
Video had made doing the job with ease. Had a laptop next to me making sure I had not missed a step. Been a week and things been all good. Well worth it. Thank you!
Read more
More
$61.75
- Compare At:
-
$74.10
- You Save:
-
$12.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152859
Color: Black
Do-It-Yourself Stories from Customers like You
Refrigerator water dispenser stopped working Carlos R. • Houston , TX • September 19, 2014
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place...
Read more
More
$51.28
- Compare At:
-
$61.02
- You Save:
-
$9.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
- Shelves not staying securely in place
- Shelves tilting or collapsing
- Visible cracks or damage to the stud
- Difficulty in inserting or removing shelves
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
Do-It-Yourself Stories from Customers like You
The water pressure from the door was a trickle and ice cubes we're hollow Patricia R. • Shoreline , WA • June 18, 2020
Did research on line and figured it was valve inlet part. The helpful video you provide made me realize that it was an easy job to complete. Yes it was easy because of the video and the part was exactly what was needed. We saved money by doing it ourselves. So while we were on the order site we ordered the brackets for the front grill. The old ones snapped off a long time ago. Again helpful video on your site on how to do the replacement ourselves. We now have water pressure back and that...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
This push-button door switch senses when your refrigerator door opens and closes to control the interior light. Replace a worn or stuck switch to restore reliable lighting and proper on/off operation when the door moves. What it does:
- Turns the interior light on when the door opens and off when it closes
- Common fix for a light that won't turn on with the door open
- Resolves lights that stay on continuously with the door closed
- Addresses intermittent lighting from a sticking or damaged plunger
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Carefully pry the old switch from the liner; protect the surface to avoid damage
- Transfer wires to the new switch one at a time to maintain correct connections
- Press the new switch fully into place and restore power to test operation
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206629B
Color: Black
Do-It-Yourself Stories from Customers like You
Broken can Rayniero S. • Rockledge , FL • July 10, 2016
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete.
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671W
Color: white. Measures about 9 inches wide by 2-1/2 inches deep.
Do-It-Yourself Stories from Customers like You
No filtered water Donald H. • Elk River , MN • July 19, 2015
Gas insurance won't fix dispensing mechanism. Went to Youtube and watched video. Googled appliance parts, you looked reputable and took paypal. Ordered parts, repair took about 10 minutes. Thank you
Read more
More
$51.27
- Compare At:
-
$61.52
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2309758
This freezer bin replaces a cracked or missing bin to restore organized storage in your freezer. It mounts on existing tabs or rails to keep frozen items secure and easy to access.
- Provides storage and organization within the freezer compartment
- Replaces a broken, warped, or missing bin
- Helps prevent items from tipping or falling when the door opens
- Restores proper fit so the bin stays seated on its mounts
What's included: One freezer bin. Install notes:
- Power isn't required for this replacement; open the freezer and remove items from the affected area
- Lift the old bin straight up and out from the tabs/rails
- Align the new bin with the mounting points and slide or press down until fully seated
- Do not force into place; distribute weight evenly and avoid overloading
Do-It-Yourself Stories from Customers like You
Bin freezer broken Arthur H. • Miami , FL • May 16, 2016
I found the correct part and oredered. It was really great to receive that by next day in and I installed it.
I would recommend and use myself ApplianceParts Pro any time.
Arthur Hem
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W10122561
This icemaker fill cup guides incoming water from the refrigerator's inlet tube into the ice mold, helping prevent splashing and freeze-ups during the fill cycle. Replacing a cracked or missing cup restores consistent fills and reduces leaks.
- Directs water from the fill tube straight into the icemaker mold
- Helps prevent overspray, splashing, and ice buildup around the icemaker
- Replace if the cup is cracked, warped, loose, or missing
- Common symptoms: water dripping/freezing under the icemaker, clumped or misshapen cubes
What's included: 1 fill cup Install notes:
- Unplug the refrigerator and turn off the water supply before servicing
- Remove the icemaker assembly as needed to access the inlet/fill area
- Release the old cup and seat the new cup so the fill tube aligns with the opening
- Restore water and power; check for proper fill and any leaks
Do-It-Yourself Stories from Customers like You
Broken parts Miguel D. • Miami , FL • October 24, 2016
I SAW THE VIDEO AND WAS SO EASY THAT MY CHILDREN COULD DO IT
Read more
More
$18.47
- Compare At:
-
$21.98
- You Save:
-
$3.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$28.23
- Compare At:
-
$33.59
- You Save:
-
$5.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756
This factory fastener is a #8-18 x 5/8-inch Type AB screw designed for appliance assembly. It secures panels and components to restore a tight, rattle-free fit and dependable alignment. What it does:
- Thread-forming Type AB design engages thin metal or plastic components
- Secures panels, brackets, trim, or covers to reduce looseness and vibration
- Replaces missing, stripped, or corroded fasteners
- Helps maintain alignment for proper operation and reduced noise
What's included:
Install notes:
- Disconnect power before servicing; shut off water supply if working near water lines
- Use the correct driver for the screw head; start by hand to avoid cross-threading
- Tighten until snug—do not overtighten to prevent stripping or cracking plastic
- Repair damaged holes or replace worn clips/inserts before installing the new screw
Specs:
- Size: #8-18 x 5/8 in (length 0.625 in)
- Thread type: Type AB, thread-forming
Do-It-Yourself Stories from Customers like You
Door switch on dryer. James A. • Middleburg , FL • January 20, 2020
It was very easy to fix after watching your video..
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318952
Approximate measurement: 15" x 11"
Do-It-Yourself Stories from Customers like You
No problem just wanted an extra shelf Bob H. • Dayton , OH • January 30, 2015
Very nice sales representive, very helpful, polite, and very professional.., and super fast service. Ordered shelf and was on my door step in two days. I thought the price was high, but, then so is everything else these days. If the need arises, I will order again from this company.
Bob Hauff / Dayton, Ohio
Read more
More
$60.50
- Compare At:
-
$71.99
- You Save:
-
$11.49
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239891
This is the light lens that covers and protects the appliance's light source. Replacing a cracked, yellowed, or missing lens restores clear, even illumination while shielding the bulb/LED from grease, moisture, and impact.
- Diffuses light for more even, glare-free illumination
- Protects the bulb or LED module from debris, grease, and moisture
- Replace if the lens is cracked, warped, melted, discolored, or missing
- Also replace if the lens no longer stays seated or falls out
What's included: 1 light lens Install notes:
- Disconnect power to the appliance before servicing and allow the area to cool
- Remove any retaining screws or release tabs to take off the old lens
- Seat the new lens fully; reuse existing fasteners if applicable
- Do not overtighten fasteners; handle carefully to avoid damage
More
$56.40
- Compare At:
-
$67.68
- You Save:
-
$11.28