Kenmore Refrigerator 106.59963803 (10659963803, 106 59963803) Parts

This evaporator assembly circulates refrigerant and removes heat inside the freezer section to enable proper cooling and frost control. Replaces a damaged or corroded evaporator to restore normal temperature performance. What it does:

• Holds refrigerant and transfers heat so the freezer evaporates moisture and cools the compartment.
• Commonly used when frost builds up, freezer runs warm, or cooling is intermittent.
• Works with the sealed refrigeration system and defrost components to maintain proper cold temperatures.
• Designed to match OEM fit and function for compatible refrigerators.

• System evacuation, recharge, and leak testing are required after installation.
• Disconnect power before servicing to avoid electrical shock and appliance damage.
• Inspect related defrost and sealing components during replacement.

This replacement receiver lens covers and protects the appliance's infrared/receiver area and indicator light while allowing signals and status lights to show through clearly. It restores proper protection and visibility for the sensor/indicator assembly. What it does:

• Protects the IR/receiver and indicator area from dust, spills, and impact
• Allows remote/IR signals and indicator lights to pass through without obstruction
• Replaces cracked, discolored or missing lens that can hide status lights or reduce signal clarity
• Helps maintain original appearance of the control/console area

• Disconnect power to the appliance before beginning any repair.
• Remove the control console or front panel per the service manual to access the lens.
• Handle the lens gently to avoid scratching; seat it into the bezel until it snaps or rests securely.

Size: 1/4 lb.

Size: 1/4 inch.

This electronic control board replaces the main control used to manage oven functions and the user interface, restoring timed cooking, temperature regulation and display operation. Designed as a direct-fit replacement when the original control fails. What it does:

• Regulates oven temperature, bake/broil cycles and timed cooking functions
• Manages the control panel display, clock and keypad inputs
• Communicates with sensors and other modules to enable normal oven operation
• Common symptoms include no display, unresponsive touchpad/controls, or oven not heating

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the board carefully and avoid electrostatic discharge; ground yourself or use an ESD strap.

This replacement gasket seals the appliance door to help maintain proper temperature and prevent leaks, keeping the interior efficient and protected. Use it to restore a tight door seal and reduce energy loss from gaps. What it does:

• Forms a secure seal around the door to keep heat or cold inside the appliance
• Prevents water, steam, and air leaks that can cause poor performance or messes
• Helps maintain consistent internal temperature for efficient operation
• Reduces cycling and energy waste caused by a damaged or worn seal

• One replacement gasket

• Disconnect power and empty the appliance before starting any repair
• Inspect the door frame and mounting channel for damage or debris before installing
• Install by seating gasket evenly into the channel or following the OEM mounting clips/adhesive method

This ice container assembly is the removable bin that catches and stores ice from the freezer ice maker, keeping cubes contained and available for dispensing or scooping. It fits into the freezer ice area and provides a stable storage location for produced ice. What it does:

• Collects and stores ice produced by the ice maker to prevent loose cubes from scattering in the freezer
• Guides ice toward the dispenser/auger area so ice can be accessed or dispensed more reliably
• Helps keep ice clean and contained to reduce clumping and contact with other freezer items
• Replaces a cracked, warped, or damaged ice bin that won't hold ice properly

• Power off and unplug the refrigerator or switch off the breaker before servicing to avoid risk of electrical shock
• Remove any remaining ice and clear surrounding freezer area before installing the new bin
• Slide the new container into the ice maker housing until it seats; ensure it aligns with any guides or stops
• If the bin interacts with an auger or dispenser, the mechanism moves freely and does not bind after installation

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This replacement housing is the main cabinet-style enclosure that supports and protects the appliance's internal components, helping maintain proper alignment and structural integrity. Use it to restore secure mounting and reduce vibration from a damaged or cracked enclosure. What it does:

• Replaces a cracked, broken, or deformed housing that can allow components to shift or rub
• Restores proper alignment for internal assemblies to reduce noise and vibration
• Provides a secure mounting surface for panels, controls, or internal parts
• Helps maintain safe, stable operation by protecting internal wiring and components

• One replacement housing

• Disconnect power and water before starting any repair
• Take photos of the original assembly to aid reassembly; keep fasteners and clips organized
• Use appropriate hand tools; avoid forcing panels—check for hidden clips or screws

This air baffle directs and controls cold airflow inside the refrigerator compartment to help maintain even temperatures and proper circulation. Replaces a cracked, warped, or missing baffle to restore intended airflow paths. What it does

• Directs cold air from the evaporator into the refrigerator compartment for balanced cooling.
• Helps prevent uneven temperatures and localized warm or cold spots.
• Reduces excessive airflow directly onto stored items that can cause freezing or drying.
• Can rattle or obstruct airflow when cracked or loose, causing noise or reduced performance.

• One air baffle

• Disconnect power to the appliance before beginning work.
• Installation typically requires removing shelves or drawers for access; handle plastic parts gently to avoid damage.
• Align tabs or tracks and snap the baffle into place; do not force or bend beyond natural fit.

This door handle assembly provides a finished grip and secure opening for your appliance door, restoring function and appearance. Designed as a direct replacement to replace cracked, loose, or worn handles. What it does

• Replaces a damaged or broken door handle so the door can be opened and closed easily.
• Restores the original look and grip of the appliance door; useful when handle is loose, cracked, or missing.
• Secures to the door with factory mounting points to maintain proper door operation.
• Helps prevent further cosmetic damage and reduces risk of injury from sharp or broken edges.

• One door handle assembly (bisque) as shown.

• Disconnect power to the appliance before beginning any repair.
• Support or brace the door during removal and installation to avoid injury or damage.
• Typical installation requires only basic hand tools; follow factory instructions for fastener order and torque.

This blade mounting block secures the blade assembly to the appliance, keeping cutting or stirring components aligned for reliable operation and reduced vibration. It restores proper blade positioning to help eliminate noise and uneven performance. What it does:

• Supports and locates the blade assembly so blades stay aligned during operation
• Prevents wobbling or contact that can cause noise and premature wear
• Helps restore consistent cutting/stirring action when a loose or damaged block is present
• Common symptom: loose blade, rattling or grinding noises, or uneven operation

• One blade mounting block

• Disconnect power (and water if applicable) before beginning any repair
• Remove blade assembly per OEM instructions to access and replace the block
• Inspect surrounding components (fasteners, blades, seals) for wear and replace as needed