Kenmore Refrigerator 106.9532480 (1069532480, 106 9532480) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489399
$7.56
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503695
$57.39
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.30
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
Do-It-Yourself Stories from Customers like You
Kenmore washer made humming noise no agitation no more spin Peter W. • Cupertino , CA • October 18, 2026
Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts.
Read more
More
$5.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10896764
Fix uneven cooling and warm spots in your refrigerator with this air baffle. Directs cold air properly throughout compartments. Simple DIY fix.
More
$53.21
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$15.40
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 1110560
Bearing body bracket for refrigerator assembly. Secures and supports internal components. Replace if cracked, broken, or damaged to restore proper fit.
More
$7.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 606755
This insulation bag fits inside the refrigerator or freezer door panel to help maintain consistent internal temperatures. It acts as a thermal barrier that prevents warm outside air from affecting the sealed compartment. Replace it if you notice condensation forming on the door interior, inconsistent temperatures, or if the existing insulation is torn, compressed, or missing.
More
$46.35
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11606038
Fix a refrigerator with no interior light using this light socket. Simple DIY repair that takes about 15 minutes with basic tools. Fits most models.
More
$45.30
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 2150331
Protective wiring cover cap for refrigerators. Shields electrical connections from dust and damage. Replace if cracked, broken, or missing.
More
$16.71
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Do-It-Yourself Stories from Customers like You
My freezer was cooling but not fridge Charnel C. • North Lauderdale , FL • January 24, 2017
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go.
Read more
More
$49.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188756
This refrigerator unit cover mounts over the interior control/air distribution housing. It restores a clean, finished look and protects internal components by enclosing the area as designed. What it does:
- Provides a protective, finished cover for the control/diffuser housing
- Helps keep the airflow path properly enclosed inside the compartment
- Replace if the cover is cracked, warped, loose, or missing
- Common signs include rattling, visible gaps, or exposed components
What's included:
Install notes:
- Unplug the refrigerator before servicing
- Remove shelves or bins for access as needed
- Release tabs or remove screws to take off the old cover; retain hardware for reuse
- Align and secure the new cover; do not overtighten fasteners, then restore power
Do-It-Yourself Stories from Customers like You
Cover unit in back of refrigerator need to be replaced Lawrence T. • Catalina , AZ • March 20, 2016
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT.
Read more
More
$82.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2188405A
Creates a tight seal to keep cold air in and humid air out. Replace if door won't seal, frost builds up, or gasket is torn. Confirm fit by model number.
More
$152.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days