Kenmore Dryer 110.76842500 (11076842500, 110 76842500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11736322
This is the outer cover that protects the electrical terminal block on the back of a dryer. It shields the power cord connection point from accidental contact and helps prevent dust or debris from reaching the wiring terminals. Replace this cover if it is cracked, broken, or missing to ensure safe operation and protect the electrical connections.
Do-It-Yourself Stories from Customers like You
Broken coupling half Neal F. • W Portsmouth , OH • February 27, 2026
Replaced broken coupling with new coupling
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403636
Short baffle that mounts inside the dryer drum to lift clothes as the drum rotates. Replace if cracked, broken, or missing for proper tumbling action.
Do-It-Yourself Stories from Customers like You
The dryer will me a buzzing but wouldn't turn Jose B. • Berkeley , CA • April 02, 2017
I watched You Tube and it gave me an idea of what was was wrong.. The motor was frozen. There was not room here to comment about the service that I received . It is only one word fantastic, from the time I started chat with the rep to the time I finished. Amazing. I order the part on Tuesday and I received the parts on Wednesday. That night when I came back from work, I fixed . Everybody at home was happy that the dryer was back in business. Thank you guys and the amazing Representative that...
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Whirlpool part
By: Whirlpool
Part Number: W11222083
This power cord connects your appliance to household electricity, supplying safe, reliable power to its controls and components. Replace a damaged or overheated cord to restore dependable operation and reduce the risk of shorts.
- Supplies AC power from the wall outlet to the appliance's electrical system
- Helps resolve no power, intermittent power loss, or tripped breaker issues
- Replace if the cord is cut, frayed, melted, discolored, or feels hot at the plug
- Restores safe operation when the original plug or insulation is damaged
What's included: 1 power cord Install notes:
- Disconnect power at the outlet or circuit breaker before servicing
- Note wire routing and connection points; match the original orientation for hot, neutral, and ground
- Seat the cord properly and secure with the model's required strain relief or clamp to prevent tension on terminals
- Ensure the cord is not pinched and is clear of sharp edges, hot surfaces, and moving parts; test for proper operation
Do-It-Yourself Stories from Customers like You
New cord Michael C. • Bakersfield , CA • May 10, 2021
Thanks to you, all went well. No problems.
Read more
More
$69.95
- Compare At:
-
$82.54
- You Save:
-
$12.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Door switch on dryer. James A. • Middleburg , FL • January 20, 2020
It was very easy to fix after watching your video..
Read more
More
$12.54
- Compare At:
-
$12.92
- You Save:
-
$0.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066217
Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't heat up. John B. • Dundalk , MD • January 19, 2020
Installed a new Ignitor & Thermal Fuse.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 279980
This is the duct assembly - sometimes called the heater box - that houses or channels heated air from the heating element into the dryer drum. It directs airflow so clothes dry efficiently and evenly. Replace this assembly if it is cracked, warped, or damaged, which can cause poor drying performance, unusual noises, or overheating issues.
Do-It-Yourself Stories from Customers like You
Just general maintenance Blanca S. • Brooklyn , NY • July 09, 2017
I've had my dryer for 10yrs...Thanks to you I can keep my dryer for another 10yrs.... your instructional videos are the best... and the website I love.. easy to navigate and find your parts...
Read more
More
$147.95
- Compare At:
-
$176.06
- You Save:
-
$28.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10549550
Replaces the front pull on drop-down hamper-style dryer doors. Restores a comfortable grip when your original handle is cracked, loose, or missing.
Do-It-Yourself Stories from Customers like You
Clothers dryer door handle was broken Mike R. • Bartlett , TN • July 13, 2015
Bought a replacement part and put it in myself. I took the door and the old one snapped out and the new one snapped in.
Read more
More
$6.67
- Compare At:
-
$8.00
- You Save:
-
$1.33
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850756
Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W11117429
Do-It-Yourself Stories from Customers like You
Paint was spilled down lint chute screen was not removed quickly and became stuck in the chute Jay C. • Albany , CA • November 26, 2016
I replaced the chute and screen - I am very mechanical and have good tools - it took me less than 30 minutes - would take many people longer but it is a straightforward project
Read more
More
$80.95
- Compare At:
-
$95.52
- You Save:
-
$14.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
$192.35
- Compare At:
-
$213.76
- You Save:
-
$21.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694419
This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:
- Produces audible tones for cycle end, timers and other appliance notifications
- Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
- Helps you hear and identify completed cycles and timed alerts
- Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
- One adjustable buzzer kit
Install notes:
- Disconnect power before servicing to avoid shock risk
- Access may require removing the control panel; keep fasteners organized for reassembly
- Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
- Test buzzer function with power restored before fully reassembling
Do-It-Yourself Stories from Customers like You
My electric dryer wasn't heating during drying Deborah H. • Athens , MI • January 20, 2020
I was looking for a parts sight and found yours. I started to watch all the video tutorials on each part and the "check these connections first video". Well by doing this I was able to find the source of my problem. What I thought was the heating coil not working right, ended up being the timer that was bad!!! I am so very happy with your sight and the step by step videos that were the success to being able to do this on my own.
Read more
More
$71.95
- Compare At:
-
$86.34
- You Save:
-
$14.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8563663
Main top panel assembly that forms the finished top surface of your dryer. Replace if cracked, discolored, damaged, or worn to restore appearance.
Do-It-Yourself Stories from Customers like You
Dryer top had lost its color do to chemicals. Looked awful William H. • Citrus Heights , CA • January 06, 2024
Replaced with a new top.
Read more
More
$146.95
- Compare At:
-
$174.87
- You Save:
-
$27.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10828905
Supports the front of the dryer drum and maintains proper alignment. Replace if drum wobbles, rubs, or causes excessive noise. Verify fit with your model.
More
$136.72
- Compare At:
-
$162.70
- You Save:
-
$25.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395530
6-20 screw secures panels, brackets, and internal components. Replace stripped, missing, or damaged screws to restore proper fit and eliminate rattling.
Do-It-Yourself Stories from Customers like You
Door switch wasn't working Gaines S. • Donna , TX • March 18, 2017
Ordered new part. watched repair instructions on UTube. repair went well. Struggled with the grommet that holds the wiring harness. Didn't see that another grommet comes with the switch and wiring harness.
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318277
Dryer won't heat or gas won't ignite? This gas valve controls gas flow to the burner assembly. Moderate DIY repair requiring drum removal.
Do-It-Yourself Stories from Customers like You
Gas valve was leaking at the outlet Stuart P. • Fox River Grove , IL • June 01, 2019
Remove the top cover, front door panel, drum, and back cover to access the valve assembly hold down bolts. Unhook the gas line, remove the electrical connections to the coils, then R&R the valve assembly. Don’t forget to hook the connectors back to the coils before putting everything back together...
Read more
More
$218.95
- Compare At:
-
$262.74
- You Save:
-
$43.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10041960
This is a metal spring that attaches to the dryer door hinge and provides tension to hold the door in the closed position. It ensures the door stays securely shut during operation. Replace this spring if the dryer door won't stay closed, swings open on its own, or if the existing spring is stretched, broken, or missing.
Do-It-Yourself Stories from Customers like You
Door would not stay closed. Mark B. • Greenfield , WI • January 05, 2020
Purchased the above kit to repair the door hardware. Also had to purchase door hinges to replace one I found broken after disassembling the dryer front. Parts arrived as shown in the online pictures, and arrived within 4-5 business days.
Read more
More
$26.60
- Compare At:
-
$31.65
- You Save:
-
$5.05