Kenmore Dryer 110.76954693 (11076954693, 110 76954693) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694298
This bracket is used to attach and is included in the igniter kit. Save money by ordering the igniter kit 279311.
More
$16.43
- Compare At:
-
$19.55
- You Save:
-
$3.12
Genuine Whirlpool part
By: Whirlpool
Part Number: W11222846
Dryer lint screen door provides access to the lint filter. Replace if cracked, broken, or won't close properly. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Broken parts Joao L. • Albertson , NY • February 16, 2020
Changed the old parts with the new ones.
Unscrewed one side. The other side was broken
Put the new parts together and screwed back into place
Done. Everything works
Read more
More
$93.95
- Compare At:
-
$112.23
- You Save:
-
$18.28
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10416072
This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:
- Provides a sealed change of direction for a water, drain, or vent line inside the appliance
- Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
- Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
- Helps eliminate intermittent draining or venting issues caused by a damaged fitting
What's included: One elbow. Install notes:
- Disconnect power and shut off water supply before accessing the part
- Verify orientation and routing before removing the old elbow to ensure correct reinstallation
- Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
- Tighten fittings to secure but avoid over-tightening which can crack plastic components
Do-It-Yourself Stories from Customers like You
Kenmore Elite dryer stopped functioning. Bruce B. • Lone Tree , CO • November 01, 2021
I found the Appliance Parts Pros website and WOW! I am very grateful that I found the website! I called the phone number on the website and there was a woman who took my call and was extremely helpful with helping me determine an optimal course of action. She advised that I follow the video that was on the website to verify that I needed a dryer belt. This had been my assumption up until the time I had spoken with her. but I was not basing my assumption base on seeing that I needed a new dryer...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3398948
Jumper wire for dryer broken belt switch. Installs on idler arm assembly. Replace if wire is damaged, broken, or missing after belt replacement.
More
$47.95
- Compare At:
-
$57.54
- You Save:
-
$9.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3406051
Do-It-Yourself Stories from Customers like You
I smelled a little gas each time i opened the dryer door i called the gas company and the service man found the nut on the union was split Richard B. • Oak Creek , WI • April 11, 2015
A plumbing supply store found the part on the internet with a Whirlpool part #. I found that number on the website of another parts supplier (Appliance Zone) but it did not have a picture of the part. It was called a gas connector, and I ordered the part. It arrived quickly, but the name on the parts bag was "elbow". It was only the elbow. I couldn't believe that someone would sell half of a union. I did more searching and found your website which had a picture and description of a "Elbow Union...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 694538
Mounting bracket for dryer shunt assembly. Secures electrical shunt component to cabinet frame. Replace if cracked, bent, or missing hardware slots.
More
$38.82
- Compare At:
-
$42.70
- You Save:
-
$3.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344
Color: White. Size: 1 qt. can. Acrylic appliance paint.
More
$103.33
- Compare At:
-
$121.93
- You Save:
-
$18.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3401850
Dryer won't heat or ignites inconsistently? Faulty wire harness between gas valve and igniter disrupts ignition signals. Simple connector replacement.
Do-It-Yourself Stories from Customers like You
No heat gas dryer all other functions working Fred P. • Moon Township , PA • March 18, 2018
I couldn’t figure out what sensor was bad. I changed some of the usual suspects- thermostat, thermistor, high limit sensor n even the coils on the gas valve which tested slightly out of spec on the ohms. Visual inspection of the gas igniter seemed a little odd to my untrained eye. It looked like two parallel prongs that weren’t connected- like this is some sort of spark gap? Yup. Silly me. Of course the igniter functions like a mini oven broiler element. Simple as that if you know what you’re...
Read more
More
$127.65
- Compare At:
-
$151.90
- You Save:
-
$24.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366705
Replacement mounting screw for securing panels, brackets, and interior assemblies. Needed when original screw is stripped, missing, or damaged.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403498
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8563747
Exhaust vent elbow routes hot air and lint from your dryer to the external vent. Replace if cracked, bent, or leaking to restore airflow and safety.
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8563749
If your dryer takes forever to dry clothes or feels overly hot, a clogged or damaged exhaust pipe may be restricting airflow. Direct replacement part.
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 233076
Compression nut for dryer installation. Secures hoses and connections. Replace if stripped, corroded, or missing to ensure proper assembly and fit.
More
$39.78
- Compare At:
-
$47.74
- You Save:
-
$7.96
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3389871
Mounting bracket for dryer interior assembly. Secures components in place. Replace if bracket is bent, cracked, broken, or missing during repairs.
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3393767
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10295523
This pipe plug seals an unused or service opening in a household appliance's plumbing to stop leaks and prevent debris entry. It restores a watertight closure so the appliance can operate safely and without water loss. What it does:
- Plugs open pipe or hose fittings to prevent water leaks
- Helps maintain proper water flow by sealing unused ports
- Keeps debris and contaminants out of the plumbing system
- Can stop intermittent drips originating from service openings
What's included:
Install notes:
- Turn off water supply and power to the appliance before starting work
- Hand-start threads to avoid cross-threading; tighten only to OEM torque or finger-tight plus a quarter-turn if unspecified
- If the original used sealant or gasket, replace with the same type per OEM instructions
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Out Of Stock
Usually ships within 4 - 14 days