Kenmore Range 362.72231202 (36272231202, 362 72231202) Parts
Genuine Ge part
By: Ge
Part Number: WB37K18
Left side end plate for electric ranges. Replaces cracked, broken, or missing end panels that provide structural support and finished appearance.
More
$3.90
- Compare At:
-
$8.36
- You Save:
-
$4.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB38K2
A replacement vent brace that secures the appliance vent assembly and helps keep vent components aligned for steady airflow and quiet operation. Restores proper support to a loose or sagging vent assembly. What it does:
- Supports and stabilizes the vent/duct assembly so it stays aligned during use
- Reduces vibration and rattling caused by a loose vent bracket
- Helps maintain proper airflow by keeping vent components in the correct position
- Fits where the original vent brace mounts to the appliance frame
What's included: One vent brace Install notes:
- Disconnect power (and gas, if applicable) before servicing the appliance
- Remove the appropriate access panels to reach the vent area; keep fasteners for reassembly
- Verify bracket orientation and screw locations match the original before tightening
More
$7.78
- Compare At:
-
$7.92
- You Save:
-
$0.14
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB39K5
Protective liner panel for range storage or warming drawers. Replace if cracked, stained, warped, or missing to restore drawer appearance and function.
More
$74.75
- Compare At:
-
$92.83
- You Save:
-
$18.08
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB53K10002
$51.70
- Compare At:
-
$52.53
- You Save:
-
$0.83
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB53K3
Left side panel for gas range ovens. Replaces cracked, damaged, or missing exterior side panels. Structural component for oven cabinet assembly.
More
$38.28
- Compare At:
-
$65.78
- You Save:
-
$27.50
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB53K4
$93.95
- Compare At:
-
$94.29
- You Save:
-
$0.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K10030
$12.32
- Compare At:
-
$20.99
- You Save:
-
$8.67
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K2
$19.95
- Compare At:
-
$29.04
- You Save:
-
$9.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K21
Back panel for gas ranges. Installs on the rear exterior of the unit. Replace if the original panel is cracked, dented, rusted, or missing.
More
$46.27
- Compare At:
-
$51.06
- You Save:
-
$4.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K24
$31.95
- Compare At:
-
$32.14
- You Save:
-
$0.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K31
Frame weld for gas ranges. This structural component supports the range cabinet. Replace if cracked, broken, or damaged during repair work.
More
$86.44
- Compare At:
-
$148.53
- You Save:
-
$62.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB2K17
Genuine Ge part
By: Ge
Part Number: WB2K8
Genuine Ge part
By: Ge
Part Number: WB13K10014
The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.
Symptoms of a bad igniter:
- Burners not lighting
- Igniter sparking erratically
The causes of a bad part can include physical damage or wear and tear over time.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
One burner had difficulty lighting David M. • American Fork , UT • March 06, 2015
I had concluded that the igniter was going bad and ordered a new one. I also watched the video on how to replace the ignitor.
The video explained that after you removed all the screws to the burner assemblies, you needed to lift the range top and replace the ignitor. They did explain that there were clips holding the top down, but implied if you exerted enough force it would pop open.
I tried several times, different ways and it would not release. Then I notice that the clips were located...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB13K25
The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.
Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.
Symptoms of a bad spark module include:
- Burners that will not ignite or only intermittently ignite
- Flashback or burning above the burner head
- The smell of gas when turning burners on
This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014
My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB49K2
Do-It-Yourself Stories from Customers like You
Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015
New pans
Read more
More