Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Range 362.74624300 (36274624300, 362 74624300) Parts

Range Door Bracket
Genuine Ge part
By: Ge
Part Number: WB02K10245

Secures the door panel to your range. Replace if the bracket is bent, cracked, or broken, causing the door to sag or misalign during use.

More
$8.70
Compare At:
$9.57
You Save:
$0.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Mounting Screw Kit
Genuine Ge part
By: Ge
Part Number: WB1X558D

Mounting screw kit for ranges and ovens. Includes 12 screws for securing panels, brackets, or components. Replace missing or stripped screws.

More
$19.61
Compare At:
$23.34
You Save:
$3.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Wire Cover
Genuine Ge part
By: Ge
Part Number: WB34K5

Protective wire cover for range burner igniter wires. Replaces cracked, broken, or missing covers. Shields wiring from damage inside the range cabinet.

Do-It-Yourself Stories from Customers like You Degraded burner igniter wires   Richard W. • Bakersfield , CA • August 19, 2016

Checked online instructions for range top ands rear upright removal. Cleaned inside surfaces before removing individual wires one at a time. Ran the new wires through retainers first, then to the correct igniters next. Replaced removed parts to restore. Note: The remove the top burner screws from the cook top before trying to remove it. Otherwise, you will bend the burner gas supply tubes and possibly damage them if not done in sequence. Utube mentioned using a screwdriver for the cook top... Read more

More
$7.40
Compare At:
$16.04
You Save:
$8.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Side Broiler Panel
Genuine Ge part
By: Ge
Part Number: WB63K3

Left hand side

More
$19.76
Compare At:
$28.48
You Save:
$8.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Spark Ignition Wire Harness
Genuine Ge part
By: Ge
Part Number: WB18K10035

Harness connects spark module to burner igniters on gas ranges. Replace if wires are frayed, cracked, burned, or damaged to restore reliable ignition.

Do-It-Yourself Stories from Customers like You 2 of the ignitors would not spark wires were frayed by ? mice   Paul F. • Hernando , MS • July 26, 2014

The only issue I had was that I had ordered spark igniters the week prior after watching your repair video which showed the spark igniters with wires attached. When the ignitors arrived, there were no wires, so I ordered this harness which actually fixed the problem with having to open the igniters. I am now trying to return the igniters, but I can't do it without the serial number from my appliance, which I did not use the order the parts, I now have to make a trip back up to my rental unit... Read more

More
$32.95
Compare At:
$39.21
You Save:
$6.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Control Panel Insulation
Genuine Ge part
By: Ge
Part Number: WB35K10040

Insulation shield that installs behind the range control panel. Protects control board and wiring from oven heat. Replace if cracked, damaged, or missing.

Do-It-Yourself Stories from Customers like You Main control panel stopped working   Randy B. • La Grange , TX • January 27, 2019

The main control panel finally went out on our stove making it useless. With the diagrams on the web site I was able to find the exact replacement parts I needed. Ordering the parts was fast and easy. Within a few days the parts were delivered and within 10 minutes my stove was working like new. The parts were a fraction of what a new stove would have cost me. Read more

More
$9.95
Compare At:
$11.74
You Save:
$1.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Oven Door Hinge Pin
Genuine Ge part
By: Ge
Part Number: WB14K5

Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.

More
$7.37
Compare At:
$8.36
You Save:
$0.99

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Burner Orifice Spud
Genuine Ge part
By: Ge
Part Number: WB28K10029

Gas burner orifice spud for range cooktop conversion between LP and natural gas. Replace when converting fuel types or if missing or damaged.

Do-It-Yourself Stories from Customers like You Propane to natural gas conversion on range and dryer   Vincent P. • Howell , NJ • October 09, 2014

Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time. Read more

More
$32.37
Compare At:
$38.20
You Save:
$5.83

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Hinge Mounting Screw
Genuine Ge part
By: Ge
Part Number: WB1K53

Mounting screw that secures the hinge assembly on electric and gas ranges. Replace this fastener if the original is stripped, missing, or damaged.

More
$6.41
Compare At:
$8.36
You Save:
$1.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Oven Door Spacer Pad
Genuine Ge part
By: Ge
Part Number: WB2X1222

Small cushioning pad that spaces and protects oven door glass panels. Replace if cracked, worn, or missing to prevent glass damage and reduce noise.

More
$6.39
Compare At:
$8.36
You Save:
$1.97

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Cooktop Mounting Clip
Genuine Ge part
By: Ge
Part Number: WB2X2030

Mounting clip secures appliance components to prevent movement and wear. Replace if parts shift, vibrate, or become loose. Verify fit with your model number.

More
$14.65
Compare At:
$19.72
You Save:
$5.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Oven Igniter Cover Shield
Genuine Ge part
By: Ge
Part Number: WB34K14

Protective shield that covers the oven igniter. Replace if cracked, broken, or missing to shield the igniter from spills, drips, and falling debris.

Do-It-Yourself Stories from Customers like You Lost igniter cover plate.   Larry F. • Grand Prarie , TX • November 11, 2023

During the oven Igniter's replacement, I lost the cover plate for the broiler Igniter. Also during the oven Igniter replacement, I discovered that the last Tech to work on the Igniter had lost a screw and the Igniter was being held on by one screw. After carefully researching my problem I landed on the AppliancePartsPros.com website and found exactly what I needed. Made my order, and received my parts pretty fast. Everything is fixed and I'm assured that it's done correctly this time. Read more

More
$15.59
Compare At:
$18.40
You Save:
$2.81

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Oven Insulation Wrap
Genuine Ge part
By: Ge
Part Number: WB35K7

Insulation wrap that lines the oven cavity to reduce heat loss and dampen sound. Replace if torn, compressed, missing, or damaged during repairs.

More
$56.95
Compare At:
$67.77
You Save:
$10.82

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Oven Back Insulation
Genuine Ge part
By: Ge
Part Number: WB35K8

Replaces cracked or missing oven back insulation in your range. Installs behind the oven cavity to provide heat protection and sound dampening.

More
$27.66
Compare At:
$47.84
You Save:
$20.18

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Support Base Plate
Genuine Ge part
By: Ge
Part Number: WB63K10232

Support base plate for electric and gas ranges. Mounts underneath to provide structural stability. Replace if cracked, broken, or missing for secure installation.

More
$25.63
Compare At:
$30.50
You Save:
$4.87

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw 10-24 X 1/4 (Machine)
Genuine Ge part
By: Ge
Part Number: WB1K12

A replacement 10-24 x 1/4 machine screw that secures panels and components in place, restoring proper fit and reducing rattles or loose parts. Small but essential for assembly and trim fastening on compatible appliances. What it does:

  • Fastens appliance panels, brackets, and small components using a 10-24 threaded connection
  • Stops loose or rattling trim, control panels, and internal brackets when the original screw is missing or damaged
  • Matches OEM thread and length for correct fit where specified
  • Used wherever a short 10-24 machine screw is required to secure parts
What's included: One 10-24 x 1/4 machine screw Install notes:
  • Use the correct screwdriver or nut driver to avoid stripping the head
  • Tighten until snug; avoid overtightening which can strip threads or crack plastic
  • Replace with the same part number to ensure proper thread engagement and fit
  • Disconnect power and follow appliance safety procedures before accessing internal areas

More
$7.78
Compare At:
$7.92
You Save:
$0.14

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store